• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.1
• /
• pp.9-14
• /
• 2009

Purpose: Nowadays in the nuclear medicine, many studies and efforts are being made to reduce the scan time, as well as the waiting time to be needed to execute exams after injection of radionuclide medicines. Several methods are being used in clinic, such as developing new radionuclide compounds that enable to be absorbed into target organs more quickly and reducing acquisition scan time by increase the number of Gamma Camera detectors to examine. Each medical equipment manufacturer has improved the imaging process techniques to reduce scan time. In this paper, we tried to analyze the difference of image quality between FBP, 3D OSEM reconstruction methods that commercialized and being clinically applied, and Astonish reconstruction method (A kind of Iterative fast reconstruction method of Philips), also difference of image quality on scan time. Material and Methods: We investigated in 32 patients that examined the Bone SPECT from June to July 2008 at department of nuclear medicine, ASAN Medical Center in Seoul. 40sec/frame and 20sec/frame images were acquired that using Philips‘ PRECEDENCE 16 Gamma Camera and then reconstructed those images by using the Astonish (Philips’ Reconstruction Method), 3D OSEM and FBP methods. The blinded test was performed to the clinical interpreting physicians with all images analyzed by each reconstruction method for qualitative analysis. And we analyzed target to non target ratio by draws lesions as the center of disease for quantitative analysis. At this time, each image was analyzed with same location and size of ROI. Results: In a qualitative analysis, there was no significant difference by acquisition time changes in image quality. In a quantitative analysis, the images reconstructed Astonish method showed good quality due to better sharpness and distinguish sharply between lesions and peripheral lesions. After measuring each mean value and standard deviation value of target to non target ratio with 40 sec/frame and 20sec/frame images, those values are Astonish (40 sec-$13.91{\pm}5.62$ : 20 sec-$13.88{\pm}5.92$), 3D OSEM (40 sec-$10.60{\pm}3.55$ : 20 sec-$10.55{\pm}3.64$), FBP (40 sec-$8.30{\pm}4.44$ : 20 sec-$8.19{\pm}4.20$). We analyzed target to non target ratio from 20 sec and 40 sec images. And we analyzed the result, In Astonish (t=0.16, p=0.872), 3D OSEM (t=0.51, p=0.610), FBP (t=0.73, p=0.469) methods, there was no significant difference statistically by acquisition time change in image quality. But FBP indicates no statistical differences while some images indicate difference between 40 sec/frame and 20 sec/frame images by various factors. Conclusions: In the circumstance, try to find a solution to reduce nuclear medicine scan time, the development of nuclear medicine equipment hardware has decreased while software has marched forward at a relentless. Due to development of computer hardware, the image reconstruction time was reduced and the expanded capacity to restore enables iterative methods that couldn't be performed before due to technical limits. As imaging process technique developed, it reduced scan time and we could observe that image quality keep similar level. While keeping exam quality and reducing scan time can induce the reduction of patient's pain and sensory waiting time, also accessibility of nuclear medicine exam will be improved and it provide better service to patients and clinical physician who order exams. Consequently, those things make the image of department of nuclear medicine be improved. Concurrent Imaging - A new function that setting up each image acquisition parameter and enables to acquire images simultaneously with various parameters to once examine.

• Food Science and Preservation
• /
• v.18 no.6
• /
• pp.875-883
• /
• 2011

Brown rice vinegar was made from brown rice mash with different brewing starter addition rates in static culture, and its quality characteristics were investigated. As a result, the amounts of alcohol produced in the fermentation process were shown to be 9.1, 8.8, 8.6 and 8.5% in the Nuruk 75 : crude enzyme 25 (B), Nuruk 50 : crude enzyme 50 (C), Nuruk 25 : crude enzyme 75 (D) and Nuruk 0 : crude enzyme 100 (E), respectively. The higher the percentage of crude enzyme added was, the lower the alcohol content that was produced. Nuruk 100 : crude enzyme 0 (A) was appeared to contain the lowest alcohol content (7.7%). In addition, the titratable acidity in all the groups was about 0.7%. The final titratable acidity (BV) of brown rice vinegar made with static culture was the highest (approximately 5.2%). The initial pH appeared to be between 3.6~4.0 and steadily decreased as the fermentation progressed, and the pH was almost unchanged after 15 day fermentation. The examination of the changes in the organic acids showed that the acetic acid content was similar in all the groups, and that the single starter added (AV, EV) group had much more other organic acids than the mixed starters added (BV, CV, DV) group. From these results, the mixed starters (Nuruk and crude enzyme) added group appeared to be superior to the single starter added in terms of alcohol production ability and vinegar quality. As the future aging process, however, is expected to change the flavor components and sensory characteristics, studies on various quality factors of vinegar are needed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.9
• /
• pp.1366-1372
• /
• 2010

This study investigated the quality characteristics of brown rice vinegar (agitated culture and static culture) derived from brown rice Takju with different types of yeasts. The alcohol content by yeast was the highest in B (brown rice Takju produced by S. cerevisiae GRJ) at 14.3% and the titratable acidity was less than 0.6% in all ranges. When quality characteristics of agitated and static culture brown rice vinegar using them were compared, acidity of agitated culture vinegar recorded the highest level or 6.05% at 7 day of fermentation DV (brown rice vinegar produced by S. kluyveri DJ97) with the initial acidity of 1.0% and the initial pH of 3.9~4.0, and AV (brown rice vinegar produced by S. cerevisiae JK99), CV (brown rice vinegar produced by S. cerevisiae H9) and BV (brown rice vinegar produced by S. cerevisiae GRJ) recorded as 5.64, 5.55 and 5.32%, respectively. In addition, acidity of static culture vinegar increased continuously to 5.01~5.31% until the 14 day of fermentation and then tended to decrease slightly from the 16 day of fermentation. Difference in acidity and pH of brown rice vinegar according to types of yeast was not significant. Comparison of free amino acid of brown rice vinegar showed that for agitated culture brown rice vinegar, the content of total free amino acid was higher in the order of BV, DV, AV and CV and the content of essential amino acid was the highest in BV by recording over 1,000 ppm. The content of total free amino acid of static culture brown rice vinegar was higher than that of agitated culture vinegar in all ranges and especially static culture brown rice vinegar contained more serine, alanine, valine, isoleucine, leucine and $\gamma$-aminobutyric acid than agitated culture vinegar. In particular, $\gamma$-aminobutyric acid recorded over ten times higher level or 456.91~522.66 ppm. From these results, quality characteristics of brown rice vinegar was affected by acetic acid fermentation methods rather than types of yeast. However, as future aging process is expected to change flavor components and sensory characteristics, studies on various quality factors of vinegar are needed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.12
• /
• pp.1981-1987
• /
• 2013

In order to use the excellent features of saponin and phenolic compounds in the leaf and fruit of ginseng, ginseng fruit Yakgwa (GFY), ginseng leaf Yakgwa (GLY) and ginseng root Yakgwa (GRY) were made via adding the fruit, leaf and root powder in the process of making Yakgwa, and the properties were investigated. When making Yakgwa, GFY and GLY had superior expansion compared to GRY. 2.5-GFY (added 2.5% ginseng fruit powder) and 2.5-GLY (added 2.5% ginseng leaf powder) increased about 1.68 times and had better expansion than the control; however, when more amount of fruit and leaf were added, the expansion was decreased. The GFY and GLY showed green and red color, and the brightness and yellowness were decreased. Oil absorption during making Yakgwa showed to increase as the amount of fruit and leaf powder were increased regardless of the ginseng parts. Hardness of Yakgwa increased as the root additives were increased, and it decreased when leaf and fruit were added. The results of sensory evaluation on ginseng-based Yakgwa showed that oily taste was lowered as the amount of fruit and leaf additives were increased, which had increased the preference. On the overall preference of Yakgwa, 5.0-GFY, 2.5-GLY and 7.5-GRY was high, which contained 2.30 mg/g, 1.02 mg/g, and 0.91 mg/g of saponin, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.10
• /
• pp.1467-1475
• /
• 2016

To make soft and less stale bread, various amounts of gelatinized wheat flour dough were added for making pan bread. In the dough process, higher gelatinized wheat flour dough showed higher consistency and dough development time but a lower dough stability time. Expansion during fermentation represented the highest value upon addition of 10% gelatinized wheat flour dough (GWFD), and this value decreased with increasing amount of gelatinized wheat flour dough. Volume of bread was the highest in the control and lowest in 30% GWFD, and there was no difference between 10% GWFD and 20% GWFD. Moisture contents of bread made with various amounts of gelatinized wheat flour dough increased with increasing gelatinized wheat flour dough amount. Color values of bread made with various gelatinized wheat flour dough were not significantly different. Chewiness, brittleness, and hardness of bread made with control and 10% GWFD showed low values, whereas bread made with 20% GWFD and 30% GWFD showed high values. During storage, chewiness, brittleness, and hardness increased with increasing storage period in whole breads, whereas breads made with 10% GWFD showed the lowest increasing rate. In the sensory strength test, chewy texture increased upon addition of gelatinized wheat flour dough. In the consumer acceptance test, 10% GWFD showed the most overall acceptance. In conclusion, bread made with 10% gelatinized wheat flour dough is desirable for increasing softness and decreasing bread staling.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.10
• /
• pp.1438-1446
• /
• 2016

The objectives of this study were to investigate the effects of superheated steam (SHS) treatment on the physicochemical and microbial properties of garlic. The garlic was treated by SHS at temperatures of 100, 150, 200, 250, 300, and $350^{\circ}C$ for 60 s. The moisture content of raw garlic was lower than that of SHS-treated garlic. The total thiosulfinate and pyruvate contents were dramatically reduced by SHS treatments. The antioxidant activities of garlic measured by ferric reducing/antioxidant power, 2,2-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt radical scavenging assay, and total phenolics content decreased by SHS. The major volatile sulfur compounds of garlic such as diallyl disulfide, allicin, allyl sulfide, diallyl sulfide, and diallyl trisulfide were significantly reduced by SHS. The antimicrobial effects of raw garlic were stronger than those of SHS-treated garlic against three strains of bacteria, including Staphylococcus aureus, Escherichia coli, and Bacillus cereus. However, total aerobic bacteria in garlic were dramatically reduced by SHS from 8.6 to 2.9 log CFU/g. The results from the sensory evaluation show that SHS treatment of garlic above $200^{\circ}C$ provides better acceptably due to reduction of off-flavor and pungency of garlic. These results suggest that superheated steam treatment can used as an efficient process for reducing garlic off-flavor and pungency.

• Applied Biological Chemistry
• /
• v.45 no.1
• /
• pp.11-17
• /
• 2002

Fermentation characteristics with/without nitrogen source and quality of the fruit distillate of Opuntia ficus-indica var. saboten were investigated during the manufacturing process of a Korean traditional liquor. As the fermentation period increased, acidity, brix degree, and alcohol concentration increased, whereas pH and contents of reducing sugar decreased. Acidity, pH, and brix degree were higher, whereas the content of reducing sugar lower, in the nitrogen source-added distillate than in the distillate without nitrogen source. The growth of yeast increased, while that of bacteria decreased; this trend was more prominent with the addition of a nitrogen source. Sojues, distilled from two types of mashes and diluted with $H_2O$ and tails of distillate into 22% alcohol concentration, showed pH $3.7{\sim}4.0$, acidity $0.02{\sim}0.10$, and $5.4{\sim}6.1$ $^{\circ}Brix$. Analysis through GC using direct injection methods revealed common volatile flavor compounds in sojues, including acetaldehyde, acetyl acetone, acetic acid ethyl ester, ethyl alcohol, 2-propyl alcohol, acetone, n-propyl alcohol, butanoic acid methyl ester, 2-phenyl ethanol, thymol, acetic acid phenyl ester, and vanillic aldehyde. As revealed through the sensory evaluation, no significant difference (p>0.05) in overall acceptability was shown among four experimental groups, while color and flavor showed significant differences(p<0.05).

• Korean Journal of Cognitive Science
• /
• v.23 no.1
• /
• pp.109-132
• /
• 2012

According to recent embodied cognition approach, understanding of actions is not based on abstract symbolic process but based on mental simulation of sensory-motor information related to those actions. As supporting evidence, motor resonance effect is a facilitation/interference effect of motor response in terms of similarity between observed action and concurrent own action. In the current research, we investigated this effect in the situation to perceive a complex social action perception and how it would be modulated by perspectives of construals of the social action scene. For this purpose, we created three kinds of fighting action scenes of two people in terms of body actions of the subject(ie., hitting, stepping, biting), and described them in two perspectives; active and passive. During the experiment, subjects had to verify the congruency of the picture and the description first, and if they are congruent, they had to do two different actions in terms of color of following cues. In the first experiment, subjects' response time for stepping on a pedal and pressing a button were analyzed for measuring motor resonance effect for the foot movement. In the second experiment, voice response time with a microphone and button pressing time were analyzed for the mouth movement motor resonance effect. Results showed the facilitation of the foot movement(in Exp1), and the mouth movement(in Exp2) only when the action scene was described in active perspective. Our results indicate that the motor resonance effect can be occurred during perception of social actions in the real life situation, but it can be also modulated by the perspective of the mental construal of the action event.

• Applied Biological Chemistry
• /
• v.13 no.3
• /
• pp.207-218
• /
• 1970

Studies were carried out to develope the most economical and practical methods of packaging and preservation of kimchi, so commercialization of kimchi manufacture could proceed rapidly. The results obtained may be summarized as following. (1) It is generally established that the acceptable range of lactic acid content of kimchi is between 0.4% and 0.75%. Based on sensory evaluation, kimchi having lactic acid content below 0.4% and above 0.75% was not edible, and the time of optimum taste corresponded to the vicinity of 0.5% of lactic acid content. For the refrigeration storage with or without preservatives, the packaging kimchi in plastic film must be done at the lactic acid content of 0.45%, for lactic acid fermentation will continue slowly after the packaging. However, for the heat sterilized kimchi the packaging should be done at the 0.5% of lactic acid content for the best because lactic acid fermentation is completely stopped after the packaging. (2) Polyethylene, polypropylene, and polycello were chosen as suitable packaging materials. Polyethylene is cheapest among them but kimchi packaged in this film was damaged frequently in handling process and gave off kimchi flavor. On the other hand polypropylene also gave off kimchi flavor, but its higher mechanical strength gave better protection to kimchi and it had superior display effect due to the transparancy. Therefore polypropylene made much better packaging material. Polycello proved to be the best packaging material from the standpoint of physical characteristics but its price is higher than that of other plastic films. To be effective, the thickness of plastic films for packaging kimchi must exceed 0.08mm. (3) Keeping property of kimchi appeared to be excellent by means of freezing. However, by the time the frozen kimchi was thawed out at room temperature, moisture loss due to drip was extensive, rendering the kimchi too stringy. (4) Preservation of kimchi at refrigerated temperatures proved to be the best method and under the refrigerated condition the kimchi remained fresh as long as 3 months. The best results were obtained when kimchi was held at $0^{\circ}C$. (5) In general, preservatives alone were not too elective in preserving kimchi. Among them potassium sorbate appeared to be most effective with the four fold extension of self-life at $20^{\circ}C$ and two fold extension at $30^{\circ}C$. (6) In heat sterilization the thickness of packaged kimchi product had a geat effect upon the rate of heat penetration. When the thickness ranged from 1.5 to 1.8cm, the kimchi in such package could be sterilized at $65^{\circ}C$ for 20 minutes. Kimchi so heat treated could be kept at room temperature as long as one month without apparent changes in quality. (7) Among combination methods, preservation at refrigerated and heat sterilization could be favorably combined. When kimchi was stored at $4^{\circ}C$ after being sterilized at $65^{\circ}C$ for 20 minutes, it was possible to preserve the kimchi for more than 4 months.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.5
• /
• pp.459-468
• /
• 1986

This study was attempted to process low-sodium salt fermented small shrimp as substitutes for traditional high-sodium salt fermented one which has widely been favored and consumed in Korea. Low-salt fermented small shrimp was prepared with $4\%$ sodium chloride and $4\%$ potassium chloride, and various additives such as $0.5\%$ lactic acid, $6\%$ sorbitol and $4\%$ ethylalcohol extract of red pepper as preservatives and flavor enhancers. And the changes of taste compounds, volatile compounds and fatty acid composition in low-salt fermented small shrimp were analyzed and compared with those of conventional $20\%$ sodium salt fermented one during the fermentation of 120 days at $25{\pm}3^{\circ}C$. The most favorable taste for fermented small shrimp were reached at 60 days of fermentation. Judging from sensory evaluation, little difference of taste was detected between the low-salt fermented small shrimp and high-sodium salt fermented one. The principal taste compounds in fermented small shrimp were free amino acids, and betaine and nucleotides and their related compounds played an assistant role. The major amino acids in fermented small shrimp were glutamic acid, leucine, proline, glycine, lysine and aspartic acid. The major fatty acids in fermented small shrimp samples were 16:0, 20:5, 22:6, 16:1 and 18:1, and unsaturated fatty acids decreased slightly while saturated fatty acids increased during fermentation. At 60 days of fermentation 8 kinds of volatile fatty acids (acetic acid, propionic acid, isobutyric acid, butyric acid, isovaleric acid, valeric acid, isocarproic acid, carproic acid), 6 kinds of carbonyl compounds (ethanal, propanal, 2-methylpropanal, 3-methylbutanal, pentanal, 2-methylpentanal), and 3 kinds of volatile amines (methylamine, trimethylamine, isopropylamine) were identified.