• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.2
• /
• pp.28-33
• /
• 2008

In a scanning electron microscope (SEM), outside acoustic noise causes image noise that distorts observations of the specimen being examined. A SEM that is less sensitive to acoustic noise is highly desirable. This paper investigates the image noise problem by addressing the mode shapes of the base plate and the transmission path of the acoustic noise and vibration. By arranging the position of the rib, a new SEM base plate was developed that had twisting as the 1st and 2nd modes. In those two twisting modes, vibration nodes existed near the center of the base plate where the specimen chamber is placed. Less vibration was transmitted to the chamber and to the specimen by the twisting modes compared to bending ones, which are the 2nd and 3rd modes for a rectangular plain base plate. An SEM with the developed base plate installed exhibited a significant reduction of image noise when exposed to acoustic noises below 250 Hz.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.151-159
• /
• 2003

This study presents method for self-calibration of the SEM(Scanning Electron Microscope) stereo image using the standard microprobe with same grid pattern and using parallel and central perspective projection equation. Result showed that parallel projection method is more suitable for standard microprobe. The maximum error of 3D coordinates acquired by this method did not exceed 5 $\mu\textrm{m}$, and DSM(Digital Surface Model) for three dimensional measurement of the rock sample was generated by the digital photogrammetry. This result can be used for quantification of micro scale change of shape and analysis of the micro morphology of rock due to weathering.

• Journal of environmental and Sanitary engineering
• /
• v.17 no.4
• /
• pp.53-60
• /
• 2002

This experiment was performed to investigate the characteristics of corrosion mechanism of water steel pipes using SEM(Scanning Electron Microscope) from March 1. 2002 to November 30. The characteristics shown in these results can be summarized as the following: 1. When I investigated to the characteristics of iron pipes and zinc pipes using a SEM, I could be found that there was a distintion in interface between an iron pipe and the scale, and that a zinc pipe wears a dark color. 2. I find much rate of $Fe_2O_3$ and a little rate of FeS as corrosion products, but I hardly find $FeCO_3$without carbon. 3 It was found that the oxide corrosion rate was 0.2~0.3mm/year. And then A-1 was 0.323mm/year that was very high.

• Korean Journal of Materials Research
• /
• v.16 no.7
• /
• pp.412-415
• /
• 2006

Te-doped $CoSb_3$ was prepared by the encapsulated induction melting, and its doping effects on the thermoelectric properties were investigated. Single phase ${\delta}-CoSb_3$ was successfully obtained by the subsequent annealing at 773 K for 24 hrs. Tellurium atoms acted as electron donors by substituting antimony atoms. Thermoelectric properties were remarkably improved by the appropriate doping. Dimensionless figure of merit was obtained to be 0.83 at 700K for the $CoSb_{2.8}Te_{0.2}$ specimen.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.1
• /
• pp.75-82
• /
• 2008

National technical qualification does not recognised degree of working-career in labor market and an industrial field situation. National qualification is supply to nurture expert manpower and accomplish of self-development and a duty accomplishment ability improvement at a side of personal. So, This study is purposed to find that a method for recognition of working-career on the national technical qualification system According to, this study is designed to questionnaire with BSC(Balaced ScoreCard), SEM(Structure Equation Model) with the delphi method, and is analysed using the AMOS 7.0 program package. Finally, This study is suggested growing to qualification standard for an examination a degree of master craftsman only under the change of national qualification systematization as a standard to operation and control.

• Journal of Environmental Science International
• /
• v.14 no.8
• /
• pp.761-770
• /
• 2005

Scanning electron microscopy / energy dispersive X-ray analyzer(SEM/EDX) has played an important role for evaluation the source of atmospheric particle because it is a powerful tool for characterizing individual particles. The SEM/EDX system provides various physical parameters like optical diameter, as well as chemical information for a particle-by-particle basis. The purpose of the study was to classify individual particle emitted from the point sources based on clustering analysis and physico-chemical analysis by SEM/EDX. The total of 490 individual particle were analyzed at 8 point sources including coal-fired power plant, incinerator, H-C oil boiler, and metal manufacturing industry. The main components were Si and AI in the coal-fired power plant, Cl and Na in the domestic waste Incinerator, S in the H-C oil boiler and S and Fe in the metal manufactory industry, respectively.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.2
• /
• pp.143-151
• /
• 2010

In this work, we propose a single electron memory 'SEM' design which consist of two key blocs: A memory bloc, with a voltage source $V_{Mem}$, a pure capacitor connected to a tunnel junction through a metallic memory node coupled to the second bloc which is a Single Electron Transistor "SET" through a coupling capacitance. The "SET" detects the potential variation of the memory node by the injection of electrons one by one in which the drainsource current is presented during the memory charge and discharge phases. We verify the design of the SET/SEM cell by the SIMON tool. Finally, we have developed a MAPLE code to predict the retention time and nonvolatility of various SEM structures with a wide operating temperature range.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.10
• /
• pp.74-81
• /
• 2003

This paper describes that the micro-cutting of WC-Co using PCD (Polycrystalline Diamond) and PcBN (Polycrystalline Cubic Boron Nitride) cutting tools are performed with SEM(Scanning Electron Microscope) direct observation method. The purpose of this study is to present reasonable cutting conditions to obtain precise finished surface and machining efficiency. Summary of the results are shown below: (1) The thrust cutting forces tend to increase more than the principal forces as the depth of cut and the cuttlllg speed are increased preferably on orthogonal microcutting. (2) The tool wear in the flank face was formed larger than that in the rake face on orthogonal micro cutting. (3) The wear appearance for PCD tools is abraded by hard WC particles of the work materials, which lead diamond grain to be detached from the bond.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05a
• /
• pp.349-352
• /
• 2003

독해 과정에서 문장간 개연성 파악은 저자의 저술의도 파악에 필수적인 요소로 작용한다. 이런 중요성은 온라인 운서의 처리에도 적용된다. 이 점은 기계를 이용한 자연어 처리과정에서 문서의 개연규칙 추출이 중요함을 의미한다. 본 논문에서는 개연규칙 추출 자동화의 전단계로서 미리 준비한 개연 규칙을 검증해 보았다. 검증과정에서는 Factotum SemNet 을 활용하였다. 검증과정을 통해, 준비된 개연규칙이 글 이해에 필요한 개연성을 잘 반영하고 있음을 확인하였고, 개연규칙 검증에 Factotum SemNet이 유용함을 보였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.812-813
• /
• 2010

There have been intensive and continuous efforts in the field of DLC coating process because of their feature, like high hardness, high elasticity, abrasion resistance and chemical stability and have been applied widely the industrial areas. In this report, tungsten carbide(WC) mold core was manufactures using high performance precision machining and the efforts of DLC coating on the surface roughness and SEM of WC mold was evaluated.