• 전자공학회논문지T
• /
• 제35T권3호
• /
• pp.87-95
• /
• 1998

본 논문에서는 시스템의 차수가 고차이며 잡음과 시간지연이 있고 시스템의 파라미터가 변하는 비최소위상 시스템에 적응할 수 있는 자기동조 제어기의 설계 하중다항식 계수를 온라인으로 조정하는 방법을 제안한다. 일반화 최소분산 자기동조 제어기의 설계 하중다항식 계수 값은 확률 근사법인 Robbins-Monro알고리즘을 이용하여 온라인으로 얻으며 자기동조 제어기의 파라미터는 순환최소자승법으로 추정하였다. 제안한 자기동조 제어 방법은 다른 자기동조 제어 방법들11.21보다 간단하고 효과적이다. 제어 알고리즘의 타당성을 확인하기 위해 일정한 시간이 경과한 후 시스템의 파라미터가 변하고 시스템의 영점이 단위원 밖에 있는 고차 시스템에 대해 컴퓨터 시뮬레이션을 하였다.

• 전자공학회논문지S
• /
• 제36S권11호
• /
• pp.22-33
• /
• 1999

본 논문에서는 시스템의 차수가 고차이고 잡음과 시간지연이 있으며 파라미터가 변하는 비최소위상 시스템에 적응할 수 있는 다변수 일반화 자기동조 제어기의 설계 하중다항식 계수들을 온-라인으로 조정하는 방법을 제안한다. 다변수 일반화 최소분산 자기동조 제어기의 파라미터는 순환최소자승법으로 추정하고 설계 하중다항식 계수들의 값은 확률근사법인 Robbins-Monro알고리듬을 이용하여 자동 조절하였다. 제안한 다변수 자기동조 방법은 극제한방법보다 간단하고 효과적이다. 컴퓨터 시뮬레이션을 통해 제안한 방법이 시스템의 파라미터가 변하고 시스템의 영점이 단위원 밖에 있는 고차 다변수 시스템에 잘 적응함을 보였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.629-632
• /
• 1997

This paper presents the design method of controller which is combined Genetic Algorithms with the Generalized minimum variance self tuning controller. It is shown that the controllers adapts to changes in the system parameters with time delays and noises. The self tuning effect is achieved through the recursive least square algorithm at the parameter estimation stage and also through the Robbins-Monro algorithm at the stage of optimizing a polynomial parameters. The computer simulation results are presented to illustrate the procedure and to show the performance of the control system.

• Journal of Mechanical Science and Technology
• /
• 제18권3호
• /
• pp.379-387
• /
• 2004

A novel flatness sensing system which is called the Flatness Sensing Inter-stand Looper(FlatSIL) system is suggested and a self-tuning PI control system using the FlatSIL is designed for improving the flatness of hot strip in finishing mill processes. The FlatSIL system measures the tension along the direction of the strip width by using segmented rolls, and the tension profile is approximated through the tension of each segmented roll. The flatness control system is operated by using the tension profile. The proposed flatness control system as far as the tension profile-measuring device works for the full strip length during the strip rolling in finishing mills. The generalized minimum variance self-tuning (GMV S-T) PI control method is applied to control the flatness of hot strip which has a design parameter as weighting factor for updating the PI gains. Optimizing the design parameter in the GMV S-T PI controller, the Robbins-Monro algorithm is used. It is shown by the computer simulation and experiment that the proposed GMV S-T PI flatness control system has better performance than the fixed PI flatness control system.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.203-204
• /
• 2019

Recently, exposed concrete designs have been placed everywhere due to increased interest in indoor residential environments. In addition, in order to overcome the disadvantages of litracon, which was developed by mixing optical fiber, LEFC(Light Emotion Friendly Concrete) was developed in Korea, which improved unit price and constructivity by inserting hard acrylic rods. LEFC, using foaming agent and lightweight aggregate for light weighting, has disadvantages that decrease mechanical properties, and thus improved mechanical properties by using ultra-high performance concrete. Also, due to the characteristics of UHPC materials, it showed excellent self-consolidating performance. Considering these characteristics, a LEFC mold with pattern design was developed. The LEFC blocks were built so that pattern shapes could be seen and these were applied on-site to Sewoon plaza, located in Seoul.

• Communications for Statistical Applications and Methods
• /
• 제12권2호
• /
• pp.425-433
• /
• 2005

Most of national-wide surveys are summarized by some statistical tables and graphs. In spite of high costs to get statistical results from surveys, we often find some statistical problems in the statistical reports. In this paper, we point out some statistical problems for the Korean Anthropometric Survey report. Also, we suggest some alternatives which may avoid the illustrated problems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.426-429
• /
• 1989

The robust self-tuning controller is designed which is guaranteed the asymptotic regulation and tracking in the presence of a bounded parameter perturbation. The global stability in the presence of a finite noise and disturbance is ensured. The controller has a error driven structure, and involves the common model of a disturbance and reference input in the internal model. The adaptive system tunes the controller parameters such that the quadratic performance index which involves a weighting factor is optimized.

• Advances in aircraft and spacecraft science
• /
• 제1권2호
• /
• pp.219-232
• /
• 2014

This paper reports on an ongoing study investigating the feasibility of using an evolutionary method to develop the rules governing Self-Organised (SO) systems for use in swarms of unmanned aerial vehicles. In general, it is difficult to design swarm systems that follow explicit global behaviour. Unlike optimising a predefined objective function, the solution to the problem is the emergent behaviour in the SO systems which results from simultaneous interactions among agents and between agents and their environment. In this study, evolutionary algorithms are used to investigate their control and effectiveness in synthesising the weighting of different rules on SO emergent behaviour. Both homogeneous swarms and heterogeneous swarms were considered though the results provided are for a case study investigating the simplest problem a homogeneous swarm without mutation. Though simple this study does indicate the potential of the approach.

• International Journal of Control, Automation, and Systems
• /
• 제2권4호
• /
• pp.423-434
• /
• 2004

In this paper, we introduce a new topology of Self-Organizing Polynomial Neural Networks (SOPNN) based on genetically optimized Multi-Layer Perceptron (MLP) and discuss its comprehensive design methodology involving mechanisms of genetic optimization. Let us recall that the design of the 'conventional' SOPNN uses the extended Group Method of Data Handling (GMDH) technique to exploit polynomials as well as to consider a fixed number of input nodes at polynomial neurons (or nodes) located in each layer. However, this design process does not guarantee that the conventional SOPNN generated through learning results in optimal network architecture. The design procedure applied in the construction of each layer of the SOPNN deals with its structural optimization involving the selection of preferred nodes (or PNs) with specific local characteristics (such as the number of input variables, the order of the polynomials, and input variables) and addresses specific aspects of parametric optimization. An aggregate performance index with a weighting factor is proposed in order to achieve a sound balance between the approximation and generalization (predictive) abilities of the model. To evaluate the performance of the GA-based SOPNN, the model is experimented using pH neutralization process data as well as sewage treatment process data. A comparative analysis indicates that the proposed SOPNN is the model having higher accuracy as well as more superb predictive capability than other intelligent models presented previously.reviously.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권1호
• /
• pp.40-49
• /
• 2004

In this paper, we propose a new architecture of Genetic Algorithms(GAs)-based Self-Organizing Polynomial Neural Networks(SOPNN), discuss a comprehensive design methodology and carry out a series of numeric experiments. The conventional SOPNN is based on the extended Group Method of Data Handling(GMDH) method and utilized the polynomial order (viz. linear, quadratic, and modified quadratic) as well as the number of node inputs fixed (selected in advance by designer) at Polynomial Neurons (or nodes) located in each layer through a growth process of the network. Moreover it does not guarantee that the SOPNN generated through learning has the optimal network architecture. But the proposed GA-based SOPNN enable the architecture to be a structurally more optimized network, and to be much more flexible and preferable neural network than the conventional SOPNN. In order to generate the structurally optimized SOPNN, GA-based design procedure at each stage (layer) of SOPNN leads to the selection of preferred nodes (or PNs) with optimal parameters- such as the number of input variables, input variables, and the order of the polynomial-available within SOPNN. An aggregate performance index with a weighting factor is proposed in order to achieve a sound balance between approximation and generalization (predictive) abilities of the model. A detailed design procedure is discussed in detail. To evaluate the performance of the GA-based SOPNN, the model is experimented with using two time series data (gas furnace and NOx emission process data of gas turbine power plant). A comparative analysis shows that the proposed GA-based SOPNN is model with higher accuracy as well as more superb predictive capability than other intelligent models presented previously.