• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.879-882
• /
• 2003

Differential Power Analysis(DPA) is powerful attack method for smart card. Self-timed circuit has several advantages resisting to DPA. In that reason, DPA countermeasure using self-timed circuit is thought as one of good solution for DPA prevention. In this paper, we examine what self-timed features are good against DPA, and how much we can get benefit from it. Also we test several self-timed circuit implementation style in order to compare DPA resistance factor. Simulation results show that self-timed circuit is more resistant to DPA than conventional synchronous circuit, and can be used for designing cryptographic hardware for smart-card.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.379-382
• /
• 2000

We designed a self-timed interface circuit for efficient communication in IP (Intellectual Property)-based system with high-speed self-timed FIFO and a set of self-timed event logic library with 0.25um CMOS technology. Optimized self-timed standard cell layouts and Verilog models are generated for top-down design methodology. A method for mitigating a design bottleneck when it comes to tolerate clock skew is described. With clock control method and FIFO, we implemented high-speed 32bit-interface chip for self-timed system, which generated maximum system clock is 2.2GHz. The size of the core is about 1.1mm x 1.1mm.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.8
• /
• pp.37-43
• /
• 2008

This paper introduces a high-speed low-power self-timed current-mode logic (STCML) that reduces both dynamic and leakage power dissipation. STCML significantly reduces the leakage portion of the power consumption using a pulse-mode control for shorting the virtual ground node. The proposed logic style also minimizes the dynamic portion of the power consumption due to short-circuit current by employing an enhanced self-timing buffer. Comparison results using a 80-nm CMOS technology show that STCML achieves 26 times reduction on leakage power consumption and 27% reduction on dynamic power consumption as compared to the conventional current-mode logic. They also indicate that up to 59% reduction on leakage power consumption compared to differential cascode voltage switch logic (DCVS).

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.7
• /
• pp.37-45
• /
• 1998

A 32-b self-timed parallel carry look-ahead adder (PCLA) designed for 0.5.mum. single threshold low power CMOS technology is demonstrated to operate with 2.7nsec delay at 8mW under 1V power supply. Compared to static PCLA and DPL adder, the self-timed PCLA designed with NORA logic provides the best performance at the power consumption comparable to other adder structures. The wave pipelined clock control play a crucial role in achieving the low power, high performance of this adder by eliminating the unnecessary power consumption due to the short-circuit current during the precharge phase. Th enoise margin has been improved by adopting the physical design of staic CMOS logic structure with controlled transistor sizes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.2
• /
• pp.268-275
• /
• 2020

A lightweight hardware design of self-timed ring based true random number generator (TRNG) suitable for information security applications is described. To reduce hardware complexity of TRNG, an entropy extractor with feedback structure was proposed, which minimizes the number of ring stages. The number of ring stages of the FSTR-TRNG was determined to be a multiple of eleven, taking into account operating clock frequency and entropy extraction circuit, and the ratio of tokens to bubbles was determined to operate in evenly-spaced mode. The hardware operation of FSTR-TRNG was verified by FPGA implementation. A set of statistical randomness tests defined by NIST 800-22 were performed by extracting 20 million bits of binary sequences generated by FSTR-TRNG, and all of the fifteen test items were found to meet the criteria. The FSTR-TRNG occupied 46 slices of Spartan-6 FPGA device, and it was implemented with about 2,500 gate equivalents (GEs) when synthesized in 180 nm CMOS standard cell library.

• Journal of the Korean Society of Physical Medicine
• /
• v.7 no.1
• /
• pp.125-135
• /
• 2012

Purpose : This study is designed to demonstrate the effects of circuit obstacle group gait training on walking ability and emotion in stroke patients. Methods : Twenty one patients with stroke were participated in this study. The subjects were divided into control group(n=10) and experimental group(n=11). Circuit obstacle group gait training consisted of walking around obstacles, walking over obstacles, walking up and down slopes and walking up and down stairs. Circuit obstacle group gait training was conducted five times per week, 1 hour per session, for 6 consecutive weeks. At pre-test and post-test, subjects were tested with 10 m walking test, timed up and go test, up and down 4 stairs test, depression and self esteem. Results : After 6 weeks of research, the experimental group showed statistically significant difference in all items when comparing prior to training and after training (p<.05), but the control group showed statistically significant difference in items other than depression and self esteem(p<.05). In the comparison between the two groups, the experimental group showed higher improvement than the control group in the 10 m walking test, timed up and go test, and up and down 4 stairs test, and there was statistically significant difference in decrease of degree in depression between the experimental group and control group(p<.05). Conclusion : This study have shown that circuit obstacle group gait training improves walking ability and emotion in stroke patients.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.9
• /
• pp.57-64
• /
• 2004

In this paper, we propose a RZ/HRZ mixture data transmission method for the asynchronous circuit design to reduce Power consumption. The dual-rail data with Rf decoding scheme is used to design asynchronous circuit, and it is easy to get a completion signal of the data validity from the native data as contrasted with sin91e-rail. However, the dual-rail scheme suffers from large chip area and increasing of Power consumption from all signals by the switching of the return-to-zero. We need to diminish number of circuit switching. The proposed RZ/HRZ data transmission reduces a switching activity to about 50% and it shows 23% lower power consumption than the conventional dual-rail coding with RZ's.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.10
• /
• pp.105-113
• /
• 2004

This paper presents a design method for an asynchronous memory with a completion signal generation circuit meeting D-I model. The proposed design method is to generates a completion signal with dummy cell and a completion signal generation circuit to indicate completion of the required read or write operation to the processor. Dividing a memory exponentially to consider delay of a bit-line and a memory cell makes memory operates as a D-I model with minimum addition of redundant circuit. The proposed memory partitioning algorithm that divides entire memory into the several partitions with a exponentially increased size reduces the memory access delay by 40% compared with a conventional partitioning method to the same size.