• Journal of information and communication convergence engineering
• /
• v.12 no.4
• /
• pp.199-207
• /
• 2014

A new cooperative MAC protocol called the busy tone cooperative medium access control (BT-COMAC) protocol is proposed to overcome the drawbacks and maximize the advantages of existing schemes. This scheme uses a new metric called decibel power to decide an appropriate helper node. Using received power strength is more efficient in selecting an appropriate helper node, especially in a densely populated network, than the effective transmission rates used in conventional schemes. All communication nodes in a communication service area are assumed to move independently. Two performance metrics are used: System throughput and channel access delay. A performance evaluation of the BT-COMAC protocol is conducted using a computer simulation over a slow fading wireless channel, and its performance results are compared with those of four existing schemes. The numerical results show that the BT-COMAC protocol improves the system throughput by approximately 15% as compared to the best existing scheme.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.24-31
• /
• 1999

This paper describes the characteristics and the criteria of electrical envirionmental effects produced from power systam, especially transmission line. Audible noise, radio and TV interlerence, electric and magnetic inductions which are main items for optimal conductor selection as well as major contributors to the community complaint of electrical envirorurental problem, are surveyed and studied comparing with the criteria or the envirorurental protection regulation of domestic and foreign countries. As a result, a domestic criteria of electrical envirorurental on power system was suggested.gested.

• Journal of Korea Multimedia Society
• /
• v.19 no.5
• /
• pp.910-917
• /
• 2016

Sensors have limited resources in sensor networks, so efficient use of energy is important. Representative clustering methods, LEACH, LEACHC, TEEN generally use direct transmission methods from cluster headers to the sink node to pass collected data. However, the communication distance of the sensor nodes at low cost and at low power is not long, it requires a data transfer through the multi-hop to transmit data to the sink node. In the existing cluster-based sensor network studies, cluster process and route selection process are performed separately in order to configure the routing path to the sink node. In this paper, in order to use the energy of the sensor nodes that have limited resources efficiently, a cluster-based multi-hop routing protocol which merges the clustering process and routing process is proposed. And the proposed method complements the problem of uneven cluster creation that may occur in probabilistic cluster methods and increases the energy efficiency of whole sensor nodes.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.2
• /
• pp.499-507
• /
• 2016

Medical imaging techniques such as Magnetic Resonance Imaging (MRI), Computed Tomography (CT) and Ultrasound (US) produce a large amount of digital medical images. Hence, compression of digital images becomes essential and is very much desired in medical applications to solve both storage and transmission problems. But at the same time, an efficient image compression scheme that reduces the size of medical images without sacrificing diagnostic information is required. This paper proposes a novel threshold-based medical image compression algorithm to reduce the size of the medical image without degradation in the diagnostic information. This algorithm discusses a novel type of thresholding to maximize Compression Ratio (CR) without sacrificing diagnostic information. The compression algorithm is designed to get image with high optimum compression efficiency and also with high fidelity, especially for Peak Signal to Noise Ratio (PSNR) greater than or equal to 36 dB. This value of PSNR is chosen because it has been suggested by previous researchers that medical images, if have PSNR from 30 dB to 50 dB, will retain diagnostic information. The compression algorithm utilizes one-level wavelet decomposition with threshold-based coefficient selection.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.9-11
• /
• 2010

Multiple-input multiple-output (MIMO) systems assisted by multi-relays with single antenna are considered. Signal transmission consists of two hops. In the first hop, the source node broadcasts the vector symbols to all relays, then all relays forward the received signals multiplied by each power gain to the destination simultaneously. Unlike the case of full cooperation between relays such as single relay with multiple antennas, in our case there is no closed form solution for optimal relay power gain with respect to minimum mean square error (MMSE). Thus we propose an alternative approach in which we use an approximation of the cost function based on rank-one matrix decomposition. As a cost function, we choose the trace of MSE matrix. We give several simulation results to validate that our proposed method obtains a negligible performance loss compared to optimal solution obtained by exhaustive search.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.2
• /
• pp.142-147
• /
• 2008

In wireless sensor networks, one of the most important issue is improvement of network lifetime with an efficient energy consumption. we repose effective multi-hop routing algorithm which increases the number of nodes alive at any time. In our algorithm we use the dynamic selection of cluster head and short distance transmission method. We simulated the proposed algorithm by using Network Simulator 2 and compared its performance with LEACH. The experimental result shows that the number of the nodes alive is increased up to 39.71[%] during the simulation time.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.564-566
• /
• 2000

To provide more noiseless upstream service on the HFC(Hybrid-Fiber Coaxial) Access Network, we should conduct upstream band analysis and have related operation skill. In this paper, we studied the upstream signal measurement to get goof transmission quality, effective operation and maintenance, also showed the method of noise analysis and that of upstream band frequency selection. Finally we tested the signal in the field and showed the analyzed result.

• Journal of information and communication convergence engineering
• /
• v.7 no.2
• /
• pp.185-192
• /
• 2009

In wireless mesh networks multi-rate technology environment, a mesh node can dynamically modify the data transmission rate on a particular link, in response to link distance, or more accurately, the perceived SNR ratio between neighbor nodes. In such networks, existing route selection schemes use a link quality metric. Thus, these schemes may easily result in the network being overloaded. In this paper, a new route metric is proposed; it considers both per-hop service delay and link quality at mesh nodes. In addition, the Load-Aware AODV (LA-AODV) protocol using the proposed metric is presented. The performance evaluation is performed by simulation using the OPNET simulator. It is demonstrated that the LA-AODV protocol outperforms the existing routing protocols using other existing route metrics in multi-rate WMN environment.

• Journal of Communications and Networks
• /
• v.12 no.6
• /
• pp.577-581
• /
• 2010

We introduce a novel packet retransmission technique which improves the efficiency of automatic retransmission query (ARQ) protocols in the context of satellite broadcast/multicast systems. The proposed coded ARQ technique, similarly to fountain coding, performs transmission of redundant packets, which are made by linear combinations of the packets composing the source block. Differently from fountain codes, the packets for the linear combinations are selected on the basis of the retransmission requests coming from the user terminals. The selection is performed in a way that, at the terminals, the source packets can be recovered iteratively by means of simple back-substitutions. This work aims at providing a simple and efficient alternative to reliable multicast protocols based on erasure correction coding techniques.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7A
• /
• pp.660-668
• /
• 2010

In energy resource constrained networks, the network lifetime can be enhanced by optimally allocating energy resource among users based on the available channel state information and the residual energy information at each node. In this paper, we propose the relay selection scheme and power allocation scheme to maximize the network lifetime in wireless relay networks with capacity constraint. The computer simulation results show that the proposed scheme increase the network lifetime in comparison to the conventional schemes.