• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.35-40
• /
• 2011

In this paper, we compare and analyze data aggregation methods based on event area in wireless sensor networks. Data aggregation methods consist of two methods: the direct transmission method and the aggregation node method. The direct aggregation method has some problems that are data redundancy and increasing network traffic as all nodes transmit own data to neighbor nodes regardless of same data. On the other hand the aggregation node method which aggregate neighbor's data can prevent the data redundancy and reduce the data. This method is based on location of nodes. This means that the aggregation node can be selected the nearest node from a sink or the centered node of event area. So, we describe the benefits of data aggregation methods that make up for the weak points of direct data dissemination of sensor nodes. We measure energy consumption of the existing ways on data aggregation selection by increasing event area. To achieve this, we calculated the distance between an event node and the aggregation node and the distance between the aggregation node and a sink node. And we defined the equations for distance. Using these equations with energy model for sensor networks, we could find the energy consumption of each method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1817-1821
• /
• 2010

본 연구에서의 지리정보시스템(GIS)을 이용한 사방댐 입지선정모델 개발은 산사태 발생 예측을 위한 사면안정성 평가 기준을 개발하여 사방댐 지점을 선정하기 위하여 체계적으로 표준화된 시스템을 구축하는 것이 목표이며, 2002년 태풍 '루사'와 2003년 태풍 '매미'에 의하여 토석류와 산사태가 발생한 서부경남 지역의 38개 지점에 대하여 항공사진 수집 및 현장조사를 수행하고, 산사태 발생에 관계되는 강우, 지형, 지질 및 토양, 임상 등을 인자로서 규정하였다. 연구결과 서부경남지역에서 발생한 산사태는 지리산, 가야산, 좌굴산 등 EL. 500m 이상의 비교적 고도가 높은 산악지역에서 지형성 집중호우에 의하여 발생하는 것으로 분석되었으며, 강우량과 산사태의 상관분석결과 시강우량 70mm 이상 및 누가강우량 230mm 이상에서 산사태의 발생빈도가 높은 것으로 나타났다. 또한 산사태 발생지점에서의 고도(평균해수면 기준)와 능선의 고도와의 비를 백분율로 계산하여 빈도를 살펴보면 산사태 발생지점이 능선의 90% 이상의 고도에서 산사태의 발생빈도가 53%로 가장 높고, 80-90%는 21%, 70-80% 16%의 순으로 산사태 발생빈도가 감소하고 있으며, 고도가 더욱 낮아져 산사태 발생지점이 60% 이하로 내려가면 산사태 발생빈도는 급격히 감소한다. 예를 들어 능선의 고도가 1000m일 경우 900m 이상의 고도(90% 이상)에서 산사태 발생빈도가 가장 높고 600m 이하의 고도(70% 이하)에서는 발생빈도가 급격히 저하하는 것으로 나타났다. 산사태 발생지점의 표면 굴곡도에 따른 산사태의 발생빈도는 대부분의 평행사면에서 74%, 약간 오목사면에서 26%가 발생하는 것으로 나타났다. 각 지구의 지질 및 토양별 산사태 발생빈도는 화성암계열의 지질 및 자갈/암괴 섞인 토사의 토양에서 발생하는 것으로 분석되었고, $34-40^{\circ}$ 사면경사에서 40%, $26-34^{\circ}$ 사면경사에서 26%, $26^{\circ}$ 이하의 사면경사에서 22%가 주로 발생하였으며, $40^{\circ}$ 이상의 높은 사면경사에서는 극히 미미하였다. 또한 임상 기준으로는 침엽수림에서 주로 발생하는 것으로 나타났다. 본 연구에서는 이상의 결과를 기초로 매우 안정, 안정, 부분적 안정, 불안정, 매우 불안정, 위험 지역으로 구분하고, 평가한 결과는 불안정 33개소, 매우 불안정 5개소 등 38개소 지점 모두에 사방댐 설치가 필요한 것으로 분석되었다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.3
• /
• pp.245-251
• /
• 2004

Recently, in a field of cadastre, a computerization of cadastral map is in progress with great growth of GSIS field. Also, the needs fer the integration of land and building information are widely increasing for integral-management and its application of various land related information. Through a revision of cadastral laws to replace the existing 2D-Cadastre with the 3D-Cadastre, a legal basis to register the position of buildings and facilities is prepared in the governmental or civil fields. This paper presented 3D-Cadastre theory that has been studied on Europe and surveyed building position directly with Totalstation at cadastral control point after choosing pilot test area, Also, the most efficient surveying method of registering building in a cadastral map is presented with comparing and analyzing building position after surveying digital orthophoto and digital map. And it is constructed a 3D information cadastral map model that can make the integral management of land, building, connecting land recorders, building management ledgers, building titles, building pictures, and related attribute information.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.225-234
• /
• 2009

Real-time Aerial Monitoring System (RAMS) is to perform the rapid mapping in an emergency situation so that the geoinformation such as orthophoto and/or Digital Elevation Model is constructed in near real time. In this system, the GPS/INS plays an very important role in providing the position as well as the attitude information. Therefore, in this study, the performance of an IMU sensor which is supposed to be installed on board the RAMS is evaluated. And the integration algorithm of GPS/INS are tested with simulated dataset to find out which is more appropriate in real time mapping. According to the static and kinematic results, the sensor shows the position error of 3$\sim$4m and 2$\sim$3m, respectively. Also, it was verified that the sensor performs better on the attitude when the magnetic field sensor are used in the Aerospace mode. In the comparison of EKF and UKF, the overall performances shows not much differences in straight as well as in curved trajectory. However, the calculation time in EKF was appeared about 25 times faster than that of UKF, thus EKF seems to be the better selection in RAMS.

• Korea Journal of Hospital Management
• /
• v.8 no.2
• /
• pp.70-92
• /
• 2003

The main objective of this paper is to investigate the factors affecting organizational citizenship behavior of hospital employees, and based on the investigation, to suggest some implications for effective human resources management of hospitals. For this purpose, physical therapists were selected as the subject of the research. Using their individual characteristics, job characteristics, professionalism and group cohesiveness as the variables affecting organizational citizenship behavior, an empirical model was constructed and tested. A survey was conducted through structured and self-administered questionnaire for the physical therapists working at hospitals of Busan-Kyongnam area, and data from 240 therapists were utilized in the final analysis. Major results of the empirical analysis are as follows: First, perception on professionalism and the degree of organizational citizenship behavior were higher for male, older, relatively more-educated and higher-grade employees. It is necessary to develope some measures to educate and motivate the employees who are in lower state of professionalism and organizational citizenship behavior. Second, among the individual characteristics, need for growth was found to have significant, positive influence on professionalism and group cohesiveness, but no direct effect on organizational citizenship behavior. On the other hand, extroversion had direct, positive effect on organizational citizenship behavior, as well as on professionalism and group cohesiveness. This result suggests that personnel selection and personality education should be conducted carefully. Third, job characteristics appeared to have very large, positive effect on professionalism, but not directly on organizational citizenship behavior. Fourth, professionalism was found to have very large, positive influence on group cohesiveness and direct, positive effect on organizational citizenship behavior. This implies that enhancing professionalism of physical therapists can strengthen organizational citizenship behavior in hospitals, and hence top management should actively support the programs for job re-design, skill education and quality improvement to enhance professionalism of their employees. Fifth and last, as an intervening factor, group cohesiveness appeared to have the largest, direct, positive effect on organizational citizenship behavior. It is, therefore, important for top management to improve group cohesiveness by exploring ways toward greater harmony and solidarity among the members of physical therapy department.

• Journal of the Korea Convergence Society
• /
• v.9 no.3
• /
• pp.241-247
• /
• 2018

The purpose of this study is to investigate the relationship between the residential satisfaction and the residential satisfaction in the residential environment. For this study, we analyzed the main factors of occupancy satisfaction by integrating previous studies on brand and housing and purchase intention, developing a research model based on the theoretical study on occupancy satisfaction, and establishing a research hypothesis. The results of this study are as follows: First, the relationship between first brand image and occupancy satisfaction is statistically significant. Second, the relationship between residential satisfaction and residential satisfaction is significant. In addition, the relationship with prices acting as parameters is analyzed to be somewhat significant. Therefore, this study is expected to provide not only useful information in the relationship between apartment supplier and consumer, but also provide basic information on similar research. Therefore, this study is expected to provide not only useful information in the relationship between apartment supplier and consumer, but also provide basic information on similar research. However, due to limitations such as selection of control variables and analytical errors, future research should be conducted through development of more comprehensive and valid indicators.

• The Korean Journal of Financial Management
• /
• v.2 no.1
• /
• pp.55-75
• /
• 1986

This article is to analyse the economic efficiency of capital market, which plays a role of resource allocation in terms of financial claims such as stock and bond. It provides various contributions to the welfare theoretical aspects of modern capital market theory. The key feature that distinguishes the theory described here from traditional welfare theory is the presence of uncertainty. Securities has time dimensions and the state and outcome of the future are really uncertain. This problem resulting from this uncertainty can be solved by complete market, but it has a weak power to explain real stock market. Capital Market is faced with the uncertainity because it is a kind of incomplete market. Individuals and firms in capital market made their consumption-investment decision by their own criteria, i. e. the maximization of expected utility form intertemporal consumption and the maximization of the market value of firm. We noted that allocative decisions that had to be made in the economy could be naturally subdivided into two groups. One set of decisions concerned the allocation of first-period resources among consumption $C_i$, investment in risky firms $I_j$, and riskless investment M. The other decisions concern the distribution among individuals of income available in the second period $Y_i(\theta)$. Corresponing to this grouping, the theoretical analysis of efficiency has also been dichotomized. The optimality of the distribution of output in the second period is distributive efficiency" and the optimality of the allocation of first-period resources is 'the efficiency of investment'. We have found in the distributive efficiency that the conditions for attainability is the same as the conditions for market optimality. The necessary and sufficient conditions for attainability or market optimality is that (1) all utility functions are such that -$\frac{{U_i}^'(Y_i)}{{U_i}^"(Y_i)}={\mu}_i+{\lambda}Y_i$-linear risk tolerance function where the coefficients ${\mu}_i$ and $\lambda$ are independent of $Y_i$, and (2) there are homogeneous expectations, i. e. ${\Large f}_i(\theta)={\Large f}(\theta)$ for every i. On the other hand, the efficiency of investment has disagreement about optimal investment level. The investment level for market rule will not generally lead to Pareto-optimal allocation of investment. This suboptimality is caused by (1)the difference of Diamond's decomposable production function and mean-variance valuation model and (2) the selection of exelusive investment or competitive investment. In conclusion, this article has made an analysis of conditions and processes of Pareto-optimal allocation of resources in capital marker and tried to connect with significant issues in modern finance.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.5
• /
• pp.135-147
• /
• 2009

The world has witnessed the dramatic expansion of international construction markets during the last decades, particularly around the developing economies and energy resource-rich countries. However, despite the booming markets, the risks of emerging regions have also increased under the rapidly changing environments confronting the global contractors. Most of all, success in overseas business mainly depends on selecting the right market to enter. Accordingly, the right market selection requires global firms to carefully carry out the scientific market entry decision by evaluating country risks, market prospects, firm's capability, level of competition, and among others. This study aims at developing a market entry model by the use of real option analysis (ROA) and scenario planning, which addresses the corporate strategic flexibility against the uncertainties encompassing the overseas construction markets. Based on the suggested approach, global contractors are expected to make a better decision rather than a typically static approach in pursuing, postponing, or abandoning a prospective market to their capacity with a concurrent consideration of uncertainties as well as its option value.

• Restorative Dentistry and Endodontics
• /
• v.28 no.5
• /
• pp.402-408
• /
• 2003

This study was done to present a criterion in selection of the most proper light sources and materials by measuring metamerism index(MI) of the light curing composite resins with spectrocolorimeter. Metamerism is defined when two objects appear to be the same color in one illuminant but different in another. This is due to the fact that they have different spectral curves that fail to match under the second illuminant. In this study, A1 & A3 shade of five light curing composite resins (Esthet-X, Filteck Z250, Filteck A110. Charisma. Vitalescence) were chosen based on Vita shade. Five samples were made for shade of each product with Teflon mold (diameter: 15mm, thickness: 2mm). Metamerism index of each samples on a Barium sulfate plate($L^{*}=96.54,{\;}a^{*}=0.19,{\;}b^{*}=0.01$) prepared for sample fixation were measured with spectrocolorimeter(Miniscan XE plus. Model 4000s. Hunter Lab. USA) by applying standard light source D^{65}, C. Fcw, TL84 and A. Standardization was done with reference standard(X=80.8, Y=85.7, Z=90.8) and light trap. The results were as follows. 1. Different resins with same Vita shade showed recognizable color difference (${\delta}E^{*}>2$). 2. All composites had MI below accepted value 0.5 between standard illuminant(D$_{65}$, C, & A) and below 1.5 under fluorescent condition (Fcw & TL84). 3. MI value between $D^{65}$ and A showed higher value than MI value between other source of light(p<0.01). 4. All resins except Z250 showed MI value that A3 is higher than A1 between $D^{65}$ and A(p<0.05).except Z250 showed MI value that A3 is higher than A1 between $D^{65}$ and A(p<0.05).

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.1
• /
• pp.121-132
• /
• 2000

This study is to investigate the performance of a new BNR process using predenitrification scheme focusing on nitrogen removal and the possibility of adapting a computer simulation scheme in BNR process development. By using a pre-denitrification basin, higher $COD/NO_3-N$ ratio could be sustained in this BNR process. The results of the investigation showed a SDNR value of 9.04mg/gMv/hr. In the anoxic tank, the average value of SPRR of 6.25mgP/gMv/hr was observed to be very sensitive to SCOD load of influents. By calibrating internal parameters (stoichiometric and kinetic parameters) of the simulation model, the results of simulation for various BNR processes gave good agreement with observed data. The major adjustment was given with three parameters, maximum specific growth rate of heterotrophic biomass, short chain fatty acid (SCFA) limit, and phosphorous release rate. With the series of simulations on varying operational conditions, the simulation by computer program can be a useful tool for process selection, and design and operation of municipal wastewater treatment plant.