• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.2
• /
• pp.113-117
• /
• 2007

We have investigated the effects of doping concentration in polysilicon floating gate on the endurance characteristics of the EEPROM cell haying the structure of spacer select transistor. Several samples were prepared with different implantation conditions of phosphorus for the floating gate. Results show the dependence of doping concentration in polysilicon floating gate on performance of EEPROM cell from the floating gate engineering point of view. All of the samples were endured up to half million programming/erasing cycle. However, the best $program-{\Delta}V_{T}$ characteristic was obtained in the cell doped at the dose of $1{\times}10^{15}/cm^{2}$.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.550-554
• /
• 1997

It is important to select a reliable electronic control system in power plants because a trip of a power plant caused by malfunction of the control system can lead to a great deal of economic and social loss. In this paper. environmental test specifications for evaluating the reliability of the electronic control system were developed in order to select a reliable one. Also, the electronic control systems made by domestic manufacturers were tested based on these developed environmental test specifications.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.12
• /
• pp.29-36
• /
• 2015

In this paper, we propose the horizontal line detection using the Haar-like features and linear regression in infrared images. In the marine environment horizon image is very useful information on a variety of systems. In the proposed method Haar-like features it was noted that the standard deviation be calculated in real time on a static area. Based on the pixel position, calculating the standard deviation of the around area in real time and, if the reaction is to filter out the largest pixel can get the energy map of the area containing the straight horizontal line. In order to select a horizontal line of pixels from the energy map, we applied the linear regression, calculating a linear fit to the transverse horizontal line across the image to select the candidate optimal horizontal. The proposed method was carried out in a horizontal line detecting real infrared image experiment for day and night, it was confirmed the excellent detection results than the legacy methods.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.4
• /
• pp.98-109
• /
• 2012

Recently, the optimisation of end-of-life (EOL) product remanufacturing processes has been highlighted. In particular, computer remanufacturing becomes important as the amount of disposed of computers is rapidly increasing. At the computer remanufacturing, depending on the selections of used computer parts, the value of remanufactured computers will be different. Hence, it is important to select appropriate computer parts at the reassembly. To this end, this study deals with a decision making problem to select the best combination of computer parts for minimising the total remanufacturing computer cost. This problem is formulated with an integer nonlinear programming model and heuristic search algorithms are proposed to resolve it.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.312-319
• /
• 2002

A recommendation system tracks past action of a group of users to make a recommendation to individual members of the group. The computer-mediated marking and commerce have grown rapidly nowadays so the concerns about various recommendation procedure are increasing. We introduce a recommendation methodology by which Korean department store suggests products and services to their customers. The suggested methodology is based on decision tree, product taxonomy, and association rule mining. Decision tree is to select target customers, who have high purchase possibility of recommended products. Product taxonomy and association rule mining are used to select proper products. The validity of our recommendation methodology is discussed with the analysis of a real Korean department store.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.4
• /
• pp.407-418
• /
• 2014

As the high-throughput requirement in the next generation communication system increases, it becomes essential to implement high-throughput SISO (Soft-Input Soft-Output) decoder with minimal hardware resources. In this paper, we present the comparison results between cascaded radix-4 ACS (Add-Compare-Select) and LUT (Look-Up Table)-based radix-4 ACS in terms of delay, area, and power consumption. The hardware overhead incurred from the retiming technique used for high speed radix-4 ACS operation is also analyzed. According to the various analysis results, high-throughput radix-4 SISO decoding architecture based on simple path metric recovery circuit is proposed to minimize the hardware resources. The proposed architecture is implemented in 65 nm CMOS process and memory requirement and power consumption can be reduced up to 78% and 32%, respectively, while achieving high-throughput requirement.

• Journal of Computational Design and Engineering
• /
• v.3 no.2
• /
• pp.112-120
• /
• 2016

This paper proposes eight groups of twenty nine scoring criteria that can help designers and practitioners to compare and select an appropriate methodology for a certain problem in designing product service system (PSS). PSS has been researched for more than a decade and is now becoming more and more popular in academia as well as industry. Despite that fact, the adoption of PSS is still limited for its potential. One of the main reasons is that designing PSS itself is a challenge. Designers and developers face difficulties in choosing appropriate PSS design methodologies for their projects so that they can design effective PSS offerings. By proposing eight groups of twenty nine scoring criteria, this paper enables a "step by step" process to identify the most appropriate design methodology for a company's PSS problem. An example is also introduced to illustrate the use of the proposed scoring criteria and provide a clear picture of how different design methodologies can be utilized at their best in terms of application.

• The Journal of the Korean dental association
• /
• v.48 no.4
• /
• pp.263-274
• /
• 2010

I classified the bone graft material according to the component. Most bone graft material is composed of inorganic and organic constituent. Organic component such DBM is associated with osteoinduction. Inorganic components such as hydroxyapatite, $\beta$-TCP, calcium sulfate, bioactive glass, polymer are associated with osteoconduction. Autogenous bone graft is ideal material. We can select any biocompatible material for the restoration of small filling defect with intact bony wall. However, we should select first osteogenetic and osteoinductive material to regenerate the viable bone tissue.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.3
• /
• pp.757-767
• /
• 2016

Password authentication is the representative user authentication method and particularly text-based passwords are most widely used. Unfortunately, most users select weak passwords and so many web sites provide a password meter that measures password strength to derive the users to select strong passwords. However, some metering results are not consistent and incorrect strength feedbacks are made. In this paper, we tackle these problems regarding password meters and present an improvement direction.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.10a
• /
• pp.146-149
• /
• 2003

In this Work, we have studied about an RSFQ 2$\times$2 crossbar switch. The circuit was designed, simulated, and laid out for mask fabrication The switch cell was composed of a splitter a confluence buffer, and a switch core. An RSFQ 2$\times$2 crossbar switch was composed of 4 switch cells, a switch control input to select the cross and bar, data input, and data outputs. When a pulse was input to the switch control input to select the cross or bar the route of the input data was determined, and the data was output at the proper output port. We simulated and optimized the switch-element circuit and 2$\times$2 crossbar switch, by using Xic and Julia. We also performed the mask layout of the circuit by using Xic and Lmeter.