• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.468-476
• /
• 2020

This study was performed to establish light intensity conditions for producing stem cuttings for aeroponic systems suitable for seed potato production using a closed-type plant production system. Shoot tip cultured plantlets of 'Sumi' and 'Chubaek' potato (Solanum tuberosum L.) were acclimatized, cuttings were collected, and stem cuttings were planted. The seedlings were raised for 40 days at different LED light intensities (60, 120, 180, and 240 μmol·m^-2·s^-1), and were cultivated in an aeroponic system for 80 days. When stem cuttings were raised at 60 μmol·m^-2·s^-1 LED light intensity, the plant height was the longest, at 17.3 cm for 'Sumi' and 16.1 cm for 'Chubaek', and the number of nodes was the highest in both cultivars. The higher light intensities, produced smaller plants with fewer nodes. The leaf areas, SPAD values, and Fv/Fm values differed slightly between cultivars. The fresh weight of stem cuttings, and the production rate of healthy stem cuttings were the highest at 60 μmol·m^-2·s^-1. In the aeroponic system, seedlings raised at 60 μmol·m^-2·s^-1 with LED light intensity showed a difference between the cultivars, but the fresh weight of stems and leaves above the planting plate was the heaviest. In addition, below the planting plate the stem cuttings were longest and the root weight was heaviest at 60 μmol·m^-2·s^-1 LED light intensity. The number of stolons also differed between cultivars, but was greatest for seedlings raised at 60 μmol·m^-2·s^-1 LED light intensity, at 4.2/plant for 'Sumi' and 7.7/plant for 'Chubaek'. At 60 μmol·m^-2·s^-1 LED light intensity, the tuber number and total tuber weight were the best, but the higher the light intensity, the smaller the total tuber number and total tuber weight for both cultivars. In conclusion, when producing potato stem cuttings for aeroponic systems using a closed-type plant production system, the most suitable LED light intensity for raising seedlings was found to be 60 μmol·m^-2·s^-1.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.21 no.1
• /
• pp.97-124
• /
• 1976

To find out the most effective method of treatments for the induction of sprouting of dormant seed potato pieces for the fall crop production of Irish cobbler, this experiment was carried out with sprout inducing bed and field performance trial. In GA treatments, about 10 days were required to sprout and resulted uniform and thin 3-4 sprouts per tuber piece, but sprouts were slender and rooting was not observed. In Ethrel treatments, 20-25 days were required, and sprouts were inferior than that of GA treatment in uniformity of sprouting, and percentage of rotten pieces and of healthy sprouted tuber pieces, but number of sprouts per tuber pieces was low, being 1-2, and sprouts were short, thick, and healthy, and showed good rooting. In GA and Ethrel mixture treatments, 1-2 more days were required to sprout than GA treatments, but sprouts were relatively healthy, and other sprouting pattern were like that of GA treatments. In Ethylene chlorohydrin and 6-Benzyl-adenine treatments, sprouting was like that of Ethrel treatments, but much more days were required than Ethrel treatments and tendency of severe rotting was observed. Optimum treating methods of promising chemicals found to be 1-2 and 2-5 ppm GA solution, 500 and 1000-2000 ppm Ethrel solution, and 1-2＋250-500 and 5＋250-500 ppm GA and Ethrel mixture solution for 60 min. treatment of tuber piece and whole-tuber, respectively. Induction of sprouting in dry and hot time resulted severer rotting of tuber pieces during the induction of sprouting and with the advancement of dormancy, being delayed in date of treatment, tendency of promotion of sprouting and rooting was observed. When sprouted tuber piece was transplanted at the same date, yields were in order of Ethrel, GA and Ethrel mixture, and GA treatment, indicating the correlation between yield and healthiness of sprout and rooting status of sprouted tuber piece. In all treatments, earlier transplanting resulted higher yields.

• Journal of Crop Science and Biotechnology
• /
• v.10 no.3
• /
• pp.193-200
• /
• 2007

Mungbean plants generally have a relatively close canopy, thus a large amount of self-shading can reduce yield due to poor light penetration. Modification of leaflet type can affect leaf canopy and could alter seed yield. Two multiple leaflet mutants were obtained from gamma-ray irradiation and used to study the mode of inheritance related to leaflet types and to evaluate their agronomic features. The cross between large-heptafoliate leaflet with small-pentafoliate leaflet mutants produce all $F_1$ plants with normal trifoliate leaflets. The $F_2$ plants segregated in leaflet size and leaflet number into a 9:3:3:1 ratio of large-trifoliate: large-heptafoliate: small-pentafoliate: small-heptafoliate plants, suggesting that independent loci control leaflet size and leaflet number. Regarding leaflet number, the $F_2$ population can be classified into normal-trifoliate, small-pentafoliate, large-heptafoliate, and small-heptafoliate at the dihybrid ratio of 9:3:3:1. The gene symbols $N_1,n_1$ and $N_2,n_2$ are proposed to represent leaflet number. Since no plant was found with large-pentafoliate leaflets, we hypothesize that the $N_2$ allele expresses pleiotropic effect on both leaflet number and leaflet size. Another possibility is that an additional locus with S and s alleles controls leaflet size and S is tightly linked with $N_2$. The effect of multifoliate leaflet on yield and yield components was evaluated in four mungbean families each with four leaflet isolines under three environments. Averaging across the families and environments, the normal-trifoliate and large-heptafoliate lines gave higher yield than small pentafoliate and heptafoliate ones. These two large leaflet lines also had higher leaf area per plant than the other multifoliate lines. Therefore, the mungbean lines with a greater leaf area, which were likely to intercept more sunlight, gave greater yield. Three AFLP markers that were found to be linked to number of leaflets per leaf, corresponded to the N1 allele of the smallpentafoliate parent.

• Korean Journal of Plant Tissue Culture
• /
• v.24 no.2
• /
• pp.83-86
• /
• 1997

To produce and supply the healthy potato, basic seed potatoes were produced by stem cutting, microtuberization and hydroponic culture. The total number of tubers and the total tuber weight per $\textrm{m}^2$ of potato were more in hydroponic culture as each products were 1, 152 and 4, 492g than in the stem cutting (75 and 4, 136g) or microtuberization (1, 080 and 1, 080g) using petridishes. The total yield per 10a in the field was propagated highly stem cutting > propagated microtubers > hydroponics > microtubers. The number of tubers per 10a produced by hydroponics (33, 064) was higher than any other methods. This indicated the hydroponic culture can be used in the multiplication of basic seed potatoes.

• Journal of Bio-Environment Control
• /
• v.17 no.4
• /
• pp.261-265
• /
• 2008

This study was carried out to investigate the effects of stem cutting ages and harvest time on the growth and yield of potato 'Dejima' in aeroponics. The stem cuttings were produced from in vitro plantlets and transplanted into an aeroponic system with 20, 30, 40 and 50 day-old stem cuttings (DOS). Tubers were harvested 60, 70, 80 and 90 days after transplanting (DAT) and sorted into following categories: $1{\sim}5$, $5{\sim}10$, $10{\sim}20$, $20{\sim}30$, $30{\sim}40$ and over 40 g. Plant height from the 40 DOS was the highest during the growing periods but no significant difference was observed on 75 DAT. The tuber weight increased until 90 DAT with the greatest weight of tubers in the 20 and 40 DOS. However, there was no significant difference among 20, 30 and 40 DOS in the number and weight of tubers. Harvesting at 80 and 90 DAT increased the number of tubers over 5 g, which are usually considered as appropriate for direct field planting.

• Korean Journal of Medicinal Crop Science
• /
• v.1 no.2
• /
• pp.120-124
• /
• 1993

Effect of eight different treatments to stimulate germination and of seedling ageson the growth and tuber yields of Liriope platyphlla was carried out in vitro(room temperature)and in vivo(field). Treatments, in vitro, of sulfuric acid(2%), $GA_3$(100ppm), and stratification were most stimulated the germination of L.platyphylla. Among them the stratification was also the most effective for emergence in field and was shortened the days to germination in vitro and in vivo. Plant height and the number of leaves and tillers per plant in the sulfuric acid and the vinyl mulch treatments were the poorest, but those in other treatments were highered without any differences. Seeding of L.platyphylla was taken 66 days to emerge and the growth of that was more decreased than that of the seedlings. The younger seedling, the shorter the day of emergence of a new shoot. The olders were bloomed earlier and more increased the growth than the yongers and the divided seedlings, but the tuber yield was most increased in the 3 years seedling.

• Journal of Mushroom
• /
• v.20 no.4
• /
• pp.193-198
• /
• 2022

The biological efficiencies of promising Pleurotus spp. were evaluated. Pleurotus ostreatus, Pleurotus tuberregium,and Pleurotus sajor-cajuwere investigated at temperatures of 22℃, 20℃, and 18℃ to determine their ability to adapt to temperatures that are likely to be found in subtropical regions. The experiment was conducted using a substrate comprising Popular sawdust 60% + cotton seed 20% + beet pulp 20% under a relative humidity of 65%. The results indicated that there were significant differences in terms of biological efficiency between the species: P. tuber regium 128.84% at 22℃, P. ostreatus 108.41% at 22℃, and P. sajor-caju is 80% at 20℃. The common temperatures at which all species showed the highest biological efficiencies were 22℃ and 20℃. Therefore, the production of the evaluated species was equal to or surpassed biological efficiencies reported in tropical environments, thereby demonstrating a potential opportunity to adapt to tropical environments without compromising quality standards.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.3
• /
• pp.191-195
• /
• 2003

This study was conducted in 2001 to develop a technique for mass production of superior seed tuber by using a wick culture system as an alternative plan to solve problems in hydroponic culture of potato. Potato (Solanum tuberosum L. cv. Dejima) plug seedings were planted on a styrofoam bed (volume $0.032\textrm{m}^3$) containing two different media (Jeju scoria + peatmoss and perlite + peatmoss, (1:2, v/v) mixture, respectively). Each bed was equipped with various number of wicks (2, 4, 6, 8 and 10 ea/bed). After harvest, the total porosity of both media was 83-85%. Bulk density of Jeju scoria + peatmoss was higher compared to that of perlit + peatmoss. However, the number of wicks did not influence to the bulk density. Conversely, moisture capacity of Jeju scoria + peatmoss was remarkably greater than that of perlite + peatmoss and was increased from 55 to 70% as elevating number of wicks. Although the number of wicks resulted in the areal growth of plants, the total yield and the weight of tuber were highest at the bed equipped with six wicks in both media.

• Journal of Plant Biotechnology
• /
• v.38 no.1
• /
• pp.49-53
• /
• 2011

The present study was performed to select suitable potato (Solanum tuberosum L.) varieties for double cropping in seed production using aeroponic system, the nutrient solution was sprayed for 20 seconds in every 3 minutes, and potatoes were planted into styrofoam at a distance of 25 cm between plants. Transplantation was completed in September 9 and potatoes were harvested in November 12. The 10 trial cultivars, 'Atlantic', 'Dejima', 'Haryong', 'Hongyoung', 'Jayoung', 'Jopung', 'Jowon', 'Namsuh', 'Seohong', 'Superior' were examined for growth and yield. The shoot growth of all cultivars at the early stage was better than 'Superior', however, no difference was observed at the late stage of plant growth. In addition, 'Superior' showed a excellent root growth during the early plant growth stage, however, increased root growth was only found in 'Jayoung', 'Seohong', during the late plant growth stage. The stolon weight was greater in the order of 'Seohong'>'Superior'>'Jayoung'>'Hongyoung'. Particularly, the number of tuber in 'Jowon' was 22.4/plant that was over twice than 'Superior'(11.3/plant). As results of the current study, therefore, we concluded that four cultivars 'Seohong', 'Jayoung', 'Hongyoung', 'Jowon'were the most suitable cultivars for basic seed production using aeroponic system in Autumn potato.

• Horticultural Science & Technology
• /
• v.18 no.3
• /
• pp.334-341
• /
• 2000

To develop a nutrient solution for a closed hydroponic system in potato (Solanum tuberosum L.) 'Atlantic' and 'Superior' potatoes were grown with the nutrient solutions whose strengths were 0.25, 0.5, 1.0, and 1.5 of the concentration of the nutrient solution developed by the National Horticultural Experiment Station in Japan. The best results in potato growth and yield were obtained with 0.5 and 1.0 strength nutrient solutions, and nutrient compositions for potato were determined based on the 1.0 strength nutrient solution; $14.4me{\cdot}L^{-1}\;N,\;4.2me{\cdot}L^{-1}\;P,\;7.5me{\cdot}L^{-1}\;K,\;5.5me{\cdot}L^{-1}\;Ca$, and $3.5me{\cdot}L^{-1}\;Mg$ for stolon growth stage and $14.8me{\cdot}L^{-1}\;N,\;4.0me{\cdot}L^{-1}\;P,\;8.5me{\cdot}L^{-1}\;K,\;6.5me{\cdot}L^{-1}\;Ca$, and $3.0me{\cdot}L^{-1}\;Mg$ for tuber growth stage. To examine the suitability of the nutrient solutions developed for potato, the strengths of 1.0 (PS 1.0S), 0.75 (PS 0.75S), or 0.5 (PS 0.5S) were compared with half-strength of Japanese Horticultural Experiment Station' solution (JH 0.5S). Changes in pH, EC, and mineral concentrations in nutrient solutions depended more on solution strength and growth stage than on the type of nutrient solution. However, most elements in solution remained constant with plant age in PS 0.75S solution during stolon growth stage, and in PS 0.5S solution during tuber growth stage. The greatest growth and tuber yield was obtained in the standard strength solution (PS 1.0S), and potato solution developed in this experiment was recommended for hydroponic culture of potato in a closed system.