• Journal of the Korean Vacuum Society
• /
• v.21 no.1
• /
• pp.6-11
• /
• 2012

In order to understand a process of contaminants removal on surface of Cu seed layer (Cu seed/Ti/Si) by sputter deposition, we investigated the changed morphology and states of Cu seed surface after pretreatment in alkali degreasing Metex TS-40A solution according to dipping time. After TS-40A pretreatment, the surface morphology with clearer grains was observed by Field emission scanning electron microscope and the changed surface chemical states and impurities on surface of samples were checked by X-ray photoelectron spectroscopy. Dipping time in TS-40A solution had very little effect on surface of Cu seed layer. After pretreatment, much carbons and little oxygens on surface of Cu seed were eliminated and the decrease of peaks corresponded to O=C and $Cu(OH)_2$ was estimated. However, Si content (=silicate) was detected on sample surface. We think that the silicate impurity forms on Cu seed by chemical reaction of TS-40A solution included silicate component. By pretreatment of alkali degreasing Metex TS-40A solution, it showed an excellent effect in removal of O=C and $Cu(OH)_2$ on Cu seed layer, but the silicate was formed on surface of Cu seed. Therefore, another cleaning process such as acid cleaning is required for removal of this silicate in use of this alkali degreasing.

• Korean Journal of Materials Research
• /
• v.11 no.9
• /
• pp.802-809
• /
• 2001

Electroplating is an attractive alternative deposition method for copper with the need for a conformal and conductive seed layer In addition, the Cu seed layer should be highly pure so as not to compromise the effective resistivity of the filled copper interconnect structure. This seed layer requires low electrical resistivity, low levels of impurities, smooth interface, good adhesion to the barrier metal and low thickness concurrent with coherence for ensuring void-free fill. The electrical conductivity of the surface plays an important role in formation of initial Cu nuclei, Cu nucleation is much easier on the substrate with higher electrical conductivities. It is also known that the nucleation processes of Cu are very sensitive to surface condition. In this study, copper seed layers deposited by magnetron sputtering onto a tantalum nitride barrier layer were used for electroplating copper in the forward pulsed mode. Prior to electroplating a copper film, the Cu seed layer was cleaned by plasma H$_2$ and $N_2$. In the plasma treatment exposure tome was varied from 1 to 20 min and plasma power from 20 to 140W. Effects of plasma pretreatment to Cu seed/Tantalum nitride (TaN)/borophosphosilicate glass (BPSG) samples on electroplating of copper (Cu) films were investigated.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.43 no.1
• /
• pp.56-61
• /
• 2023

The germination process is critical for plant growth and development and it is largely affected by environmental stress, especially salinity. Recently, hydrogen sulfide (H₂S) is well known to act as a signaling molecule in a defense mechanism against stress conditions but poorly understood regulating seed germination. In this study, the effects of NaHS (the H₂S donor) pretreatment on various biochemical (hydrogen peroxide (H₂O₂) content and amylase and protease activity) and physiological properties (germination rate) during seed germination of oilseed rape (Brassica napus L. cv. Mosa) were examined under salt stress. The seed germination and seedling growth of oilseed rape were inhibited by NaCl treatment but it was alleviated by NaHS pretreatment. The NaCl treatment increased H₂O₂ content leading to oxidative stress, but NaHS pre-treatments maintained much lower levels of H₂O₂ in germinating seeds under salt stress. Amylase activity, a starch degradation enzyme, significantly increased over 2-fold in control, NaHS pretreatment, and NaHS pretreatment under NaCl during seed germination compared to NaCl treatment. Protease activity was highly induced in NaHS-pretreated seeds compared to NaCl treatment, accompanied by a decrease in protein content. These results indicate that NaHS pretreatment could improve seed germination under salt stress conditions by decreasing H₂O₂ accumulation and activating the degradation of protein and starch to support seedling growth.

• Food Science and Preservation
• /
• v.13 no.2
• /
• pp.168-173
• /
• 2006

To investigate the effect of grapefruit seed extract pretreatment and packaging materials on the quality of dried persimmon, dried persimmons were stored for $60{\sim}100$ days at room temperature $(15^{\circ}C)$ after dipping in grapefruit seed extract and then packing with LDPE (low density polyethylene) film and Nylon/LDPE film pouch $(30{\times}30cm^2)$. Weight loss of dried persimmon packaged with Nylon/LDPE film was not exceeded 86% of control. 60% mold occurrence and 50% browness were observed compared to control. There were no significant differences in the firmness, soluble solid content and color between grapefruit seed extract pretreatment and control. Grapefruit seed extracts pretreatment had an effect on the inhibition of color change in Hunters value.

• Journal of Electrochemical Science and Technology
• /
• v.8 no.3
• /
• pp.215-221
• /
• 2017

The electroless plating process largely consists of substrate cleaning, seed formation (activator formation), and electroless plating. The most widely used activator in the seed formation step is Pd, and Sn ions are used to facilitate the formation of this Pd seed layer. This is problematic because the Sn ions interfere with the reduction of Cu ions during electroless plating; thus, the Sn ions must be removed by a hydrochloric acid cleaning process. This method is also expensive due to the use of Pd. In this study, Cu electroless plating was performed by forming a seed layer using a silver nanosol instead of Pd and Sn. The effects of the Ag nanosol concentration in the pretreatment solution and the pretreatment time on the thickness and surface morphology of the Cu layer were investigated. The degrees of adhesion to the substrate were similar for the electroless-plated Cu layers formed by conventional Pd activation and those formed by the Ag nanosol.

• Progress in Superconductivity
• /
• v.9 no.1
• /
• pp.115-118
• /
• 2007

This study investigated the effects of different kinds of seed crystals with miscut angles and pretreatment on the characteristics of a RE-123 superconductor processed by a top-seeded melt-growth (TSMG) method. When the seed crystal was heat-treated in an oxygen atmosphere, the surface structure was cleaned removing hydroxide. When the seed crystal had a miscut angle, in addition, the surface structure showed a well defined hill-and-valley structure after heat-treatment. A better microstructure, with a well-distributed small RE-123 phase, was obtained using a high miscut angle after heat-treatment in an oxygen atmosphere. As a result of the microstructure improvement, the magnetic characteristics also improved. The experimental result can be explained by reduction of nucleation activation energy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.326-326
• /
• 2011

반도체 소자의 집적화/소형화에 따라, 낮은 비저항을 가진 구리(Cu)를 이용한 배선공정에 관한 연구가 활발하게 진행되고 있다. 구리배선 공정에 있어 전기 도금법이 다양하게 적용됨에 따라, 구리도금 박막 형성을 위해 사용되는 Cu seed 층의 상태는 배선으로 형성된 Cu박막 특성에 크게 영향을 미친다 [1-3]. 본 연구에서는 sputter 방식으로 증착된 Cu seed 층(Cu seed / Ti / Si) 위에 형성된 자연산화막을 제거하기 위하여 다양한 세정방법을 도입하여 비교 분석하였다. 계면활성제인 TS-40A를 비롯한 NH4OH 용액과 H2SO4 용액을 사용하여 Cu seed 층 위에 형성된 구리산화막을 제거함으로서 형성된 표면형상 및 표면상태를 조사분석 하였다. FE-SEM (Field Emission Scanning Electron Microscope)을 이용하여 표면 처리된 Cu seed층 표면의 형상 및 roughness 등을 측정하였고, XPS (X-ray Photoelectron Spectroscopy)를 이용하여 표면 처리된 Cu seed 표면의 화학구조 및 불순물 상태를 조사하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.59-62
• /
• 2003

This study investigated the phase transformation of the $REBa_2Cu_3O_{7-x}$ (RE=Nd, Gd, By) superconductor, and CCT (Continuous-Cooling-Transformation) along with the TTT (Time-Temperature-Transformation) diagrams are suggested according to the isothermal and continuous cooling heat-treatments. According to result of fabricated single crystal of RE-123 superconductor through TSMG method based on phase transformation neted among heat treatment process, when the ionic radius elements was decreased, RE-211 phase was well-distributed. According to result that examine about seed of pretreatment effect of TSMG method, magnetic hysteresis improved when preprocess among oxygen atmosphere in same seed. and used after. Effect of miscut expressed good superconducting special quality in case miscut uses big seed.

• Korean Journal of Weed Science
• /
• v.2 no.2
• /
• pp.141-145
• /
• 1982

In order to determine the possibility of reducing rice injury caused by CNP and butachlor application, the effects of IAA seed presoaking on CNP and butachlor action against early growth of rice seedlings were investigated under flooded direct-seeding and dry-seeded conditions. CNP and butachlor injury to rice was reduced by soaking rice seeds at 0.1, 1.0 and 10ppm of IAA solution for 36 hours before seeding under flooded condition and thus shoot length and dry weight of rice seedlings increased compared with those of IAA untreated seedlings. IAA seed pretreatment also overcame the inhibitory effect of CNP and butachlor under dry-seeded condition. Effect on reducing rice injury by IAA pretreatment was more remarkable when CNP applied under dry seeded condition and butachlor under flooded condition.

• Journal of Korean Society of Forest Science
• /
• v.87 no.4
• /
• pp.503-509
• /
• 1998

This research was carried out to promote the seed germination of Styrax japonica, by several pretreatments and to examine its seedling growth and seed component variations according to time and pretreatment. The results are as follows ; 1. Styrax japonica seeds are usually germinated after more than one year cold stratification. However, when the seeds were stratificated for 5 months after dipped in the solution of 70% $H_2SO_4$ for 30 minutes and also treated with $GA_3$(3000ppm), they showed 55% germination. This demonstrated that the seeds could be germinated in one year when pretreated. 2. The growth of one-year-old seedlings after pretreatment was the same as that of two-year-old seedlings when compared 160 days after seeding. 3. Before seeding, one-year-old, pretreated seeds of Styrax japonica showed increased moisture content but decreased crude fat, carbohydrate and exude ash, which were similar to the components of two-year-old seeds.