• 제목/요약/키워드: seed coating

검색결과 113건 처리시간 0.021초

대두종자의 polymer coating 연구 1. polymer coating 종자의 conductivity 차이 (Studies on Polymer Coating in Soybean Seeds 1. Difference of Electrolyte Leaching of Polymeric Coating Soybean Seed)

  • 이성춘
    • 한국작물학회지
    • /
    • 제39권2호
    • /
    • pp.158-164
    • /
    • 1994
  • Polyme coating 종자의 환경적응성을 구명하기 위한 일환으로 콩 종자에 10종의 polymer를 coating하여 각 coating polymer별 conductivity, 발아력, 수분흡수력을 조사하였던 바 그 결과를 요약하면 다음과 같다. 1. Conductivity는 polymer coating한 종자가 coating하지 않은 종자보다 높았으며, 가장 높았던 polymer는 waterlock이었다. 2. Conductivity는 침종 후 시간이 경과할 수록 높아졌고, 100립중이 무거울 수록 높았다. 3. 수확년도가 오래된 종자의 conductivity가 당년에 수확한 종자보다도 높게 나타났다 4. 수분흡수 정도는 coating polymer에 따라 각각 달랐는데 daran 8600은 질이 떨어지는 종자에서는 수분흡수를 크게 저 해하였다. 5. Coating polymer 중 waterlock, captan, klucel, sacrust 등은 발아율을 상승시켰고, daran 8600은 발아율을 저하시켰으며 나머지 polymer는 품종에 따라 각각 달랐고 그 정도는 질이 떨어지는 종자에서 훨씬 컸다. 6. Polymer의 특성에 따라 수분흡수를 저해하거나 조장하였다.

  • PDF

겉뿌린 목초종자의 정착에 관한 연구 I. 각종 증량재 및 미량광물질의 종자피복이 발아에 미치는 영향 (Studies on Establishment of Oversown Pasture Seed I. Effects of coating materials and minerals on germination)

  • 이효원;정병용;김희경
    • 한국초지조사료학회지
    • /
    • 제7권2호
    • /
    • pp.113-119
    • /
    • 1987
  • This experiment was carried out in laboratory to find out the effect of coating materials, minerals and insecticides on germination of pasture seed. Seed coating was made by specially made machine and seed germination in petridishes was also determined from Sep. 1986 to May 1987. The results were summarized as follows; 1. Coating seed gave bad germination compared with the control. There were significant difference between treatment, coating materials and adhesives in white and red clover while Phleum pratense germination was improved by coating materials. 2. In mineral coating treatments, on Mg alone or Mg mixed treatment, germination was deepressed. Generally germination was lowed by mineral treatment, but the difference was small. 3. Uncoating treatment with insecticide was superior to coating treatment in terms of germination. Among the insecticide Ballen gave more serious effect to seed germination.

  • PDF

Chitosan 용액에 의한 목초 종자의 피복효과 (Coating Effects on Grass Seeds with Chitosan Solution)

  • 이주삼;조익환;안종호
    • 한국유기농업학회지
    • /
    • 제6권1호
    • /
    • pp.51-61
    • /
    • 1997
  • This experiment was carried out to investigate the growth response of 3 grasses to seed coating with chitosan solution and the attempt was made to estimate adequate seed coating concentrations of chitosan solution in each grass for the growth to be stimulated. Three species used in this experiment were orchardgrass, tall fescue and reed canarygrass. Six different seed coating concentrations of chitosan solution were applied as 0%(control), 0.01%, 0.05%, 0.1% and 1.0%, respectively. the results were obtained as follows; 1. Dry weight of tiller(WT), leaf area(LA), dry weight of leaf(LW), dry weight of stem(SW), dry weight of shoot(SHW), biological yield(BY) and C/F ratio were significantly different between species. 2. Number of tillers per plant(NT), dry weight of tiller(WT), dry weight of leaf(LW), dry weight of root(RW), dry weight of shoot(SHW), biological yield(BY) and T/R ration were significantly different between seed coating concentrations of chitosan solution. 3. The adequate seed coating concentrations of chitosan solution for the growth stimulating effect were different between species. The highest values of yield components and dry weight of plant parts were obtained at 1% in orchardgrass and tall fescue, and 0.05% in reed canarygrass, respectively. 4. Growth stimulating effect of seed coating in each species were different. The highest values were obtained in leaf area(LA), dry weight of leaf(LW), dry weight of root(RW), dry weight of shoot(SHW) and dry weight of biological yield(BY) in orchardgrass. The values of dry weight of stem(SW) and C/F ration were highest in reed canarygrass. 5. An increase in number of tillers per plant(NT), dry weight of leaf(LW), dry weight of stem(SW) and dry weight of root(RW) according to seed coating was attributed to the increase in dry weight of shoot(SHW). Among the aboved increasing factors, the dry weight of leaf(LW) was a main factor for the increase in dry weight of shoot(SHW). 6. An increase in dry weight of leaf(LW), dry weight of stem(SW) and dry weight of root(RW) according to seed coating was attributed to the increase in biological yield(BY). Both the dry weight of leaf(LW) and dry weight of root(RW) were main factors for the increase in biological yield(BY).

  • PDF

Effects of the Loess Coating on Seed Germination and Seedling Growths of the Eelgrass, Zostera marina

  • Park, Jung-Im;Lee, Kun-Seop
    • ALGAE
    • /
    • 제22권2호
    • /
    • pp.141-146
    • /
    • 2007
  • Seagrass bed is an important component in coastal and estuarine ecosystems, providing food and habitats to a wide variety of marine organisms. Recently, seagrass coverage has declined significantly due to anthropogenic impacts such as cultural eutrophication and reclamation, and thus efforts are under way to prevent further losses and restore disturbed seagrass habitats worldwide. Seagrass transplantation techniques for habitat restoration include vegetative and seed-based methods. Seagrass seeds can be collected easily, and sowing seeds is an economically effective method for large-scale restoration. However, large numbers of seed can be lost by seed predation and physical disturbance in the planting areas. In the present study, Zostera marina seeds were coated with loess to reduce seed loss by predation and sweeping away by the water currents, and germination rates of coated seeds and seedling growth were examined to assess the feasibility of the seed-coating method for large-scale restoration. Germination rate of the coated seeds with loess was significantly higher than that of the uncoated seeds. Additionally, seedling growths were not significantly different between the coated and the uncoated seeds. These results suggest that coating of eelgrass seeds with loess enhances success of seed germintion with no harmful effects on seedling growth. Therefore, the seed coating method using loess may be an effective and applicable seedbased transplanting technique for large-scale restoration.

시설재배지 토양중 잔류농약 경감을 위한 잎들깨 종자코팅제 선발 (Selection of coating materials to leafy perilla seed for reducing endosulfan residue in greenhouse soil)

  • 최주현;박현주;박병준;박경훈;김찬섭
    • 농약과학회지
    • /
    • 제11권4호
    • /
    • pp.276-280
    • /
    • 2007
  • 잎들깨 종자의 파종 밀도 조절을 위해 종자코팅 용도로 사용된 엔도설판 분제에 의한 시설재배지 토양중 endosulfan의 잔류량을 경감시키기 위하여 이를 대체할 수 있는 종자코팅재료의 선발 및 이들이 미치는 발아영향을 조사하였다. 코팅재료는 talc, kaoline, 패화석등 석회류가 가능하였다. 코팅재료의 종자부착을 위한 접착제로는 식용유, 전착제, 알코올, 증류수 순이었으나 종자 발아영향은 반대경향을 나타냈다. 코팅재료별 종자부착성은 패화석, 생석회, 석회, talc, kaoline이 양호하였으나 토양과의 색깔 구별성은 패화석등 석회류에 비해 talc, kaoline이 좋았다. 선발 코팅제를 종자에 부착시 잎들깨의 발아율은 talc, kaoline이 양호하였고 토양과의 색깔 구별성도 양호하였다.

종자피복, 경사조절 및 토양멀칭 처리가 녹화식물의 발아와 생장에 미치는 영향 (Effects of Seed Coating, Slope Control and Soil Mulching on Seed Germination and Seedling Growth of Rehabilitation Plants)

  • 이병태;박종민
    • 한국환경복원기술학회지
    • /
    • 제9권6호
    • /
    • pp.38-51
    • /
    • 2006
  • This study was carried out to improve rehabilitation effect by hydro-seeding methods on denuded slopes. Lespedeza cyrtobotrya, Indigofera pseudotinctoria, Arudinella hirta, Poa pratensis, and Lolium perenne were used in this study. The results of the germination and growth characteristics by seed coating, slope control and soil mulching treatments are summarized here. Seed coating of those plants had an effect on germination ratio, germination force, $LD_{50}$, and seedling growth of stem, leaf and root. The seed coating effect was highest for I. pseudotinctoria while the seedling growth was best for L. cyrtobotrya. Vermiculite+Talcum was the best coating material for germination and seedling growth of the plants. As the slopes were steeper, germination ratio was lower and seedling growth of stem and root decreased. Lots of seeds and soils were swept away when the slope was steep. Soil mulching was effective for germination, seedling growth of stem and root, and soil stabilization. It was more effective when the slope was steeper. Coir net was the most effective soil mulching material n this study.

임도 비탈면 녹화식물의 종자피복 및 복토처리가 발아와 생장에 미치는 영향 (Effects of Seed Coating and Molding on Seed Germination and Seedling Growth of Rehabilitating Plants in Forest Road Slopes)

  • 이병태;박종민
    • 한국환경생태학회지
    • /
    • 제20권4호
    • /
    • pp.436-447
    • /
    • 2006
  • 임도를 비롯한 각종 훼손지 비탈면에서 종자뿜어붙이기 공법에 의한 녹화효과를 제고하기 위해서 참싸리, 낭아초, 새, 켄터키 블루그래스, 페러니얼 라이그래스를 재료로 하여 종자피복 및 복토 여부에 따른 종자발아 및 유묘의 생장특성을 조사하였다. 그 결과를 요약하면 다음과 같다. 1. 모든 시험식물에서 종자의 피복처 리는 무피복에 비해 복토파종과 겉뿌림에서 모두 종자의 발아율을 향상시 켰다. 종자피복에 의해 전체 평균 발아율은 복토파종과 겉뿌림에서 각각 11.2%와 21.4% 향상되었다. 또한 발아세는 식물종과 처리에 따라 $0.8{\sim}3.7$일 단축시켰고, LD50은 $0.8{\sim}2.6$일 단축시키는 효과가 있었다. 그러나 모든 시험식물에서 종자피복에 의해 발아개시 일은 1일 이 내에서 지연되었다. 2. 종자피복은 식물의 지상부와 뿌리의 생장을 촉진시키는 효과가 있었다. 즉 종자피복에 의해 전체 평균 지상부생장은 복토파종과 겉뿌림에서 각각 21.7%와 34.8%향상되었고, 전체 평균 뿌리 생장은 복토파종과 겉뿌림에서 각각 22.0%와 26.2% 향상되었다. 3. 피복종자를 복토파종한 것은 겉뿌림 에 비해 발아 개시 일을 평균 1.3일 지 연시 켰으나, 발아율을 평균 5%향상시켰고, 발아세와 LD50을 각각 1.0일과 1.4일 단축시켰다. 그러나 종자피복에 의한 종자발아와 유묘생장의 향상효과는 복토파종에서보다 겉뿌림에서 더 크게 나타났다. 4.종자 피복재료 중에서는Vermiculite+Talcum가 시험식물의 종자발아와 유묘생장에 있어서 가장 효과가 좋았다. Bentonite, Calcium Carbonate, Calcium Hydroxide을 이용한 종자피복도 무피복에 비해 좋은 효과를 나타내었다. 5. 5종의 시험식물 가운데서 종자피복을 통한 발아향상효과는 낭아초에서, 유묘생장 촉진효과는 참싸리에서 가장 크게 나타났다. 즉 크기가 작은 초본류의 종자보다는 크기가 큰 목본류의 종자에서 종자픽복의 효과가 크게 나타났다. 6. 따라서 종자뿜어붙이기 공법으로 파종한 후에 복토를 할 수 없는 훼손지 비탈면에서는 녹화용 식물의 종자를 Vermiculite+Talcum 등으로 피복하여 파종함으로써 안정적 인 조기녹화를 실현할 수 있을 것으로 판단된다.

종자피복기의 피복통 회전속도가 피복종자의 물리적 특성에 미치는 영향 (Effects of Rotatory Speed of Coating Pan on the Physical Characteristics of Coated Seeds)

  • 허삼남;이성운;박천수;장박;박홍석
    • 한국초지조사료학회지
    • /
    • 제28권1호
    • /
    • pp.35-40
    • /
    • 2008
  • 본 실험은 표준화된 피복종자를 생산하기 위하여 피복통의 회전속도를 20, 30, 40, 45, 55, 60 rpm으로 하여 소형 피복통으로 레드클로버와 톨페스큐 종자를 피복하였다. 고형물질로는 vermiculite를 사용하였고 접착제는 polyvinyl alcohol을 사용하였다. 피복 후 통에서 회수된 단립 피복종자 무게, 서로 달라붙어 덩어리진 피복종자 무게, 피복되지 않고 회수된 미 피복물질 무게, 충격에 의한 피복층 탈락성 및 피복종자의 백립중 등을 조사하여 피복종자의 물리적 특성을 평가하였으며, 이 자료를 근거로 피복효과를 종합적으로 표현하는 피복지수를 산출하였다. 레드클로버 종자는 통의 회전속도 45 rpm에서 회수된 단립 종자 무게가 제일 높았으며(p<0.01), 덩어리진 종자 수가 적고 피복물질의 탈락율이 적었으며, 피복종자의 백립중도 가장 무거웠다. 톨페스큐 종자는 피복통 회전속도 40 rpm에서 회수된 단립 종자 무게가 제일 높았으며(p<0.01), 덩어리진 종자 수가 적고 피복물질의 탈락율이 적었으며, 피복종자의 백립중도 가장 무거웠다. 통의 회전속도별 피복지수는 레드클로버는 45 rpm에서(p<0.01), 톨페스큐는 40 rpm에서 제일 높았다(p<0.01). 피복통의 회전속도는 피복종자의 물리적 성질에 크게 영향을 미치기 때문에 종자피복 전에 종자나 피복제에 따른 피복통 회전속도의 표준화가 필수적이라 하겠다.

Enhancing Yield and Nutritive Value of Forage for Livestock Feeding Through Corn Soybean Intercropping Strategy with Several Pre-sowing Soybean Seed Coatings

  • Kim, Jeongtae;Song, Yowook;Kim, Dong Woo;Fiaz, Muhammad;Kwon, Chan Ho
    • 한국초지조사료학회지
    • /
    • 제37권1호
    • /
    • pp.50-55
    • /
    • 2017
  • In attempt to avoid crop damage through wild bird's picking, this study was designed with aim to evaluate several pre-sowing soybean seed coatings for optimum yield in corn-soybean mixed forage. It was investigated under four cropping treatments, viz. 1) corn sole, 2) corn mixed with soybean without any coating, 3) corn with iron coated soybean and 4) corn with thiram coated soybean. Each treatment had three replicates and corn sole was control treatment. Pioneer (P1184) and crossbred ($PI483463{\times}Hutcheson$) seeds were used for corn and soybean, respectively. The trial was conducted under randomized block design from $5^{th}$ June to $23^{rd}$ September, 2015. Data were an alyzed through ANOVA technique using SAS9.1.3 software. Results depicted that survivability of soybean against wild birds damage was found better (p<0.05) in thiram coating which was higher than iron coating and control treatment but later on thiram coating had adverse effects on subsequent growth of soybean plants. Corn stalk height was decreased (p<0.05) in thiram coating, whereas corn ear height was reduced in iron coating treatment. Iron coating enhanced (p<0.05) height of soybean plant (p<0.05) better than that of thiram coating. Soybean seed coatings didn't influence dry matter yield and nutritive value in terms of total digestible nutrients yield in corn soybean mixed forage. Conclusively, although presowing thiram coating enhanced survivability of soybean plants against wild bird damage but had adverse effects on its subsequent growth. However, soybean seed coatings didn't influence yield and nutritive value of corn soybean intercropping forage.

길항세균 Bacillus subtilis YBL-7 건조포자체의 종자피막화에 의한 생물학적 방제 (Seed Coating for the Application of Biocontrol Agent Bacillus subtilis YBL-7 against Phytopathogens)

  • 장종원;김상달
    • 한국미생물·생명공학회지
    • /
    • 제23권2호
    • /
    • pp.243-248
    • /
    • 1995
  • Agrochemicals for the plant-disease control are criticized severely for causing environmental pollution and residual problems, and consequently microbial disease control agents are expected to be safer and more economical for sustainable agriculture. Treatment of biological control agents to seed requires the use of effective delivery systems that allow full expression of the benefical qualities of the bioprotectant. For the activation and establishment of bioprotectant around the plant seed which are able protect the seeds and seedlings from pathogen attack, the optimal liquid coating formulation was obtained using 2% sodium carboxymethyl cellulose (binder), 20% sesame dregs (solid particulate material), and dried spore of Bacillus subtilis YBL-7 (bioprotectants, 10 mg/g of seed). Suppressive of root rot was demonstrated in pot trials with coated kidney bean (Phaseolus vulgaris L.) seeds. Coated seeds with B. subtilis YBL-7 spore in F. solani-infested soil reduced disease incidence by 85% to 90% after 30 days.

  • PDF