• 핵의학기술
• /
• 제22권1호
• /
• pp.90-97
• /
• 2018

폐 관류 스캔은 방사성 물질의 폐동맥 내 미세색전증을 이용하여 폐색전증의 진단에 이용되고 있으며, 만성 폐쇄성 질환이나 국소 폐 관류평가 및 조기 폐암발견 등에 이용된다. 또한 폐암환자에서의 수술 및 방사선 치료 전, 후 국소 폐 기능 예측을 위하여 이용된다. 이를 위하여 관류의 정확한 정량화가 필요하다. 이에 본 연구에서는 모든 병변 및 장기에 추적자의 흡수율 정량화가 가능한 SPECT/CT의 Q-Metrix (GE Healthcare, USA)프로그램을 활용하여 실제로 많이 이용되고 있는 평면영상의 두 가지 결과 산출 방법에 대한 상관관계 및 각 엽의 차이를 비교 평가하고자 한다. Discovery NM/CT 670 scanner (GE Healthcare, USA)장비에서 2015년 5월 1일부터 2016년 9월 13일까지 수술 전 폐암환자 50명을 대상으로 시행하였다. 환자에 대하여 $^{99m}Tc-MAA$(macro aggregated albumin) 185 MBq (5 mCi)를 정맥 주사하였고 후면 영상(Posterior view)을 기준으로 전면, 우측면, 좌측면, 우후사면, 좌후사면 영상을 획득하였다. 평면 폐 관류검사 직후 SPECT/CT를 시행하였고 영상의 Processing은 GE사 Xeleris 3.1 Workstation에서 시행하였다. 후방사면 방법은 오른 엽과 왼 엽에 사각형의 관심영역을 설정하였고 RPO영상은 3엽, LPO영상은 2엽으로 나누어 각 엽에 대한 흡수율을 얻었다. 전후 방법은 오른 엽, 왼 엽에 각각 3개의 사각형의 ROI를 설정하여 흡수율을 구하였고 왼 엽은 2엽으로 구분되어 Left middle lobe은 Left upper lobe로 포함시켜 결과를 산출하였다. Q-Metrix Method는 CT영상에 직접 관심 영역(Region of interests, ROI)을 설정하였다. 시상면(Sagittal)영상에서 2개의 Slice마다 ROI를 설정하였고 관심부피(Volume of interest, VOI)를 이용하여 체적에 대한 흡수율을 분석하였다. 통계 분석은 SPSS version 23.(SPSS Inc. USA)를 이용하여 분석하였다. Q-Metrix 방법과 후방사면 방법의 흡수율에 대한 일치 상관관계는 Right upper lobe(RUL)는 0.663, Right middle lobe(RML)는 0.623, Right lower lobe(RLL)는 0.702이고 Left upper lobe(LUL)는 0.754, Left lower lobe(LLL)는 0.823로 가장 높은 상관관계를 보였다. 전후 방법은 RML는 0.035로 흡수율이 증가되어 가장 낮은 상관관계를 보였고, RUL는 0.224, RLL는 0.447로 흡수율이 감소되었다. 왼 엽에서 LUL는 0.643, LLL는 0.456로 나타났다. 전체적인 상관관계는 후방사면 방법은 0.795로 높은 상관관계를 보였고, 전후 방법은 0.161로 나타났다. 각 엽의 차이는 Q-Metrix방법 평균${\pm}$표준편차는 RUL, RML, RLL순서대로 각각 $20.12{\pm}6.21$, $10.86{\pm}3.83$, $24.57{\pm}7.80$이고 LUL, LLL는 각각 $24.34{\pm}6.47$, $20.12{\pm}7.11$로 나타났다. 동일한 순서대로 후방사면 방법의 오른 엽은 $17.4{\pm}5.0$, $10.5{\pm}3.6$, $27.3{\pm}6.0$이었고, 왼 엽은 $21.6{\pm}4.8$, $23.1{\pm}6.6$으로 나타났다. 전후 방법에 대한 오른 엽의 평균${\pm}$표준편차는 $11.6{\pm}4.5$, $26.9{\pm}6.2$, $17.8{\pm}4.2$이고, 왼엽은 $28.4{\pm}4.8$, $15.4{\pm}5.6$로 나타났다. 본 논문에서 Q-Metrix방법에 대한 평면영상의 두 가지 방법 간에는 차이가 있는 것으로 보였다. 전후 방법의 RML는 과대평가 되었으며 RML, RLL는 상대적으로 과소평가 되었고, 모든 엽에서는 통계적으로 유의한 차이가 있었다(P<0.05). 후방사면 방법은 전후 방법보다 4배정도의 높은 상관관계를 보였고, oblique영상을 활용하여 흡수율이 과대, 과소평가가 되는 것을 줄일 수 있었다. SPECT/CT검사를 시행하지 않거나 planar image 획득 시 후방사면 방법을 이용하면 보다 실용적인 결과 값을 기대할 수 있을 것으로 생각된다. 또한 많은 환자에 대한 데이터 분석과 호흡에 대한 보정, 객관적인 방법으로 관심영역을 설정한다면 보다 정확한 결과를 산출할 수 있을 것이라 사료된다.

• 대한핵의학회지
• /
• 제32권1호
• /
• pp.71-80
• /
• 1998

우리 나라의 일부 지역 주민에서 혈청 CA19-9과 CA125 농도의 분포를 관찰함으로써 경계치 설정 이전에 미리 예비적 자료를 확보하고, 두 종양표지자의 측정치에 영향을 미치는 인자들, 특히 음주와 흡연 습관에 대한 통계적 유의성을 평가하기 위해 단시적 조사연구를 시도하였다. 1995년에 일부 농촌지역 성인 171명(남자 76명, 여자 95명)을 대상으로 하여 설문조사와 혈청 검사를 통해 개개인의 음주, 흡연습관 및 생식요인에 관한 정보 및 혈청 CA19-9 및 CA125 농도를 분석한 결과는 다음과 같다. 1) 혈청 CA19-9 농도의 평균 및 표준편차는 남녀 각각 $10.4{\pm}11.1{\mu}/ml$, $10.1{\pm}10.0{\mu}/ml$로 남녀간의 차이가 없었으나, 혈청 CA125 농도의 평균 및 표준편차는 각각 $2.5{\pm}12.2{\mu}/ml$, $11.2{\pm}7.4{\mu}/ml$로 여자에서 높았다. 한편 현재 임상적으로 적용되고 있는 양성판정치를 근거로 하여 판정한 혈청 CA19-9 및 CA125 양성률은 각각 2.9%, 1.8%이었으며, 각각 남녀간에 통계적으로 유의한 차이는 없었다. 2) 혈청 CA19-9 농도는 일일 흡연량(r=0.23, p=0.054) 및 총 흡연량(r=0.28, p=0.017)과 양의 상관관계를 보였으며, 성별로는 여자에서만 유의한 상관관계를 나타내었다(일일흡연량 r=0.59, p=.0.026 ; 총흡연량 r=0.74, p=0.003). 3) 혈청 CA125 농도는 흡연시작연령(r=0.51, p=0.000) 과는 양의 상관관계를, 총흡연기간(r=-0.23, p=0.051) 및 총흡연량(r=-0.23, p=0.057)과는 음의 상관관계를 보였는데, 성별로는 남자에서만 흡연시작연령(r=0.28, p=0.031)과 유의한 상관관계를 나타내었다. 4) 혈청 CA125 농도는 여자에서 연령(r=-0.20, p=0.058), 생리중단 연령(r=-0.28, p=0.030), 총수유기간(r=-0.29, p=0.014)과 음의 상관관계를 보였다. 5) 혈청 CA19-9 및 CA125 농도는 비만, 학력, 그리고 음주와 유의한 상관관계가 없었으며, 여자에서는 혈청 CA19-9 및 CA125 농도간에 양의 상관관계를 보였다(r=0.20, p=0.047). 6) 연령 및 비만의 교란효과를 통제하기 위한 중회귀분석 결과, 혈청 CA19-9 농도와 유의한 회귀관계를 보이는 변수는 없었다. 이에 비해 혈청 CA125 농도는 전체대상례에선 흡연시작연령이 빠르거나(p=0.000), 총 흡연기간이 길거나(p=0.001), 총흡연량이 많거나(p=0.020), 생리중단연령이 늦거나(p=0.035), 수유를 오래 할수록(p=0.050) 감소하는 것으로 나타났으나, 성별로 분석하였을 때 여자에서 흡연인자들의 유의한 회귀관계가 모두 소실되었다. 결론적으로, 혈청 CA19-9 농도는 흡연, 음주, 월경-출산관련 변수들에 의해 영향을 받는 않는 것으로 보여 실제 임상에 적용할 때 이들 변수를 고려하지 않고도 이용될 수 있는 비교적 안정된 종양표지자로 생각된다. 이에 비해 혈청 CA125 농도는 흡연량이 증가할수록 감소하는 경향을 보였으나 연령과 비만지수에 따라 흡연량이 교란영향을 받고 있는 지표임을 알 수 있었다. 한편, 여성에서는 폐경연령과 총수유기간이 유의한 관계를 보여 향후 정상치역 결정시 생리, 수유 등의 변수를 고려해야 할 것으로 사료된다.

• 치위생과학회지
• /
• 제18권2호
• /
• pp.85-96
• /
• 2018

본 연구는 공중구강보건학 구강보건행정 영역의 국가시험 A항목 학습목표 48개의 '치위생 직무관련성', '치위생역량관련성', '교육목표 설정의 가치판별성', '시의성'을 검토하여, 최종으로 제안한 사회치위생학 구강보건행정 영역의 국가시험 A항목 학습목표는 총 75개였다. 전체 학습목표 중 18개를 삭제하였고, 15개를 수정보완하였으며, 기존 학습목표 15개를 유지하였고, 새로운 학습목표 45개를 추가하였다. 학습목표 주제는 I. 사회보장과 의료보장, II. 구강보건진료제도, III. 구강보건행정, IV. 구강보건정책으로 구분하여 고찰하였다. 최근 건강보험 및 노인장기요양보험의 확대 등 의료보장제도는 국가정책의 변화 등을 반영한 의료보장과 사회보장제도에 대한 내용을 제공할 수 있도록 수정보완이 필요하며 더 나아가 제도의 문제점과 해결방안을 제시할 수 있는 '옹호자'로서의 사회적 역할을 수행할 수 있도록 사회보장과 의료보장 분야의 학습목표를 개선할 것을 제안하였다. 구강보건진료제도와 구강보건행정 분야의 기존 학습목표는 치과위생사로서 현장의 직무와 관련성이 높은 개념과 내용으로 수정보완이 필요함을 제시하였고, 구강보건정책 분야는 치과위생사로서 정책에 참여하고 치위생 정책의제를 발굴할 수 있는 역량을 강화하여 변화주도자, 옹호자의 역할을 수행할 수 있도록 국내 보건의료정책, 치위생 관련 정책 이슈의 변화, 정책과정, 정책참여, 정책평가 등의 내용을 중점으로 학습목표를 신설할 것을 제안하였다. 본 연구결과, 변화하는 시대적 상황에 부응하여 사회치위생학 분야의 학습목표를 개정할 필요성이 제기되었다. 또한, 교육내용을 개편함에 있어 우선순위를 두어 개선하여야 한다는 것에 의견이 모아졌다. 첫째, 사회치위생학 학습목표를 개정하고, 실제 직무와 관련성이 높은 역량을 개발해야 할것이다. 둘째, 사회치위생학 학습내용은 지식, 태도, 행동을 향상시킬 수 있는 학습목표를 적극 개발해야 할 것이다. 셋째, 개정된 학습목표와 역량을 기준으로 사회치위생학 교재와 교육자료의 개발이 필요할 것이다. 넷째, 개정된 사회치위생학 학습목표를 바탕으로 치과위생사 국가시험을 개선해야 할 것이다. 이러한 교육의 변화를 통하여 치위생(학)계는 학습내용이 지식중심에서 그치는 것이 아니라 지식을 통해 다양한 활동으로 전환될 수 있도록 치과위생사의 역량을 강화하고, 치위생학 학문의 질적 수준을 향상시켜야 할 것이다. 따라서 사회에 진출 한 후 임상과 지역사회 현장에서 치과위생사로서 사회적 역할과 책임을 다할 수 있는 내실 있는 교육을 운영해야 할 것이다.

• Tuberculosis and Respiratory Diseases
• /
• 제44권2호
• /
• pp.241-250
• /
• 1997

목 적 : 결핵에 대한 국가결핵관리사업이 시작된 이후 결핵의 점차적으로 감소하고 있기는 하나 최근에 다제내성균결핵환자가 심각할 정도로 증가하고 있다. 다제내성균결핵은 기존의 항결핵제에 잘 반응하지 경향이 있으며 이는 낮은 치료순응도, 2차약제의 높은 부작용 그리고 사용할 수 있는 약제의 수가 많지않은 때문으로 생각된다. 본 연구의 목적은 일개 국립결핵병원에서 입원치료중인 결핵환자의 임상양태를 살펴보고 기존의 결핵치료의 문제점을 파악하여 궁극적으로 다제내성균결핵을 포함한 결핵의 치료효율을 개선시키고자 함이다. 방 법 : 1995년 12월 30일을 기준시점으로 국립마산결핵병원에 임원한 환자 336명을 대상으로 성별 및 나이, 처음결핵을 발견하게된 계기, 가족력, 환자의 생활근거지의 지역별 분포, 과거결핵치료력 등의 역학적 조사와 입원 당시의 주증상, 흉부 X-선 사진상의 병소별 분포, 동반질환 그리고 결핵치료중에 발생한 부작용등 임상양태에 대한 조사와 입원전 사용한 약제별 분류와 약제감수성검사의 결과 등에 대해 descriptive cross-sectional study를 시행하였다. 결 과 : 연령별 분포는 20대에서 50대까지 고른 분포를 보였으며 성별로는 남자가 269예로 압도적으로 많았다. 발견계기별 분포는 보건소가 64.6%로 가장 높았다. 입원당시 주증상으로는 체중감소가 가장 흔했으며 다음으로는 기침, 호흡곤란 등의 순서였다. 흉부 X-선 사진상 병소별 분포는 양측성 병소를 가진 예가 201예로 가장 많았다. 동반질환을 가진 경우가 130예 였는데 그 중 당뇨가 49예로 가장 많았으며 다음으로는 간질환, 정신질환 등의 순서였다. 95예에서 가족력이 있었는데 부모가 결핵을 앓았던 경우가 40예로 가장 많았으며 다음으로는 형제, 부부 등의 순서였다. 결핵을 처음 진단받은 시기별 분포에서 1980년 이전은 31예 였으나 이후 최근으로 오면서 약간씩 증가하는 추세였다. 지역별 분포로는 부산, 경남지역이 압도적으로 많았다. 과거치료력을 가진 258예중 1회의 치료력을 가진 경우는 86예, 2회가 60예 그리고 3회이상이 112예 였다. 과거치료력을 가진 환자의 약제순응도별 분포는 133예만이 규칙적으로 복약하였다. 입원전 사용한 약제별 분포는 INH, EMB, RFP, PZA 등을 사용한 경우가 82예, INH, EMB, RFP 등을 사용한 경우가 50예 였으며 INH, EMB, RFP, PZA 이외 1가지 약제를 더 사용한 경우는 20예, 3가지 이상의 약제를 더 사용한 경우는 97예 였다. 154예를 대상으로 약제감수성검사를 한 결과 5제 이상 내성이 생긴 경우가 77예 였다. 치료도중 발생한 부작용으로는 위장장애가 58예로 가장 많았으며 다음으로는 피부발진 및 소양감 그리고 관절통 등의 순서였다. 결 론 : 원인 모를 체중감소가 있을 때에는 결핵을 의심해 볼 수 있을 것으로 생각된다. 결핵을 치료할 때 환자에게 결핵의 치료과정에 대해 충분한 설명을 해 줌으로 치료의 순응도를 높일 수 있을 것으로 생각된다. 초치료시 균음전화시기가 늦다든지, 여러가지 상황으로 치료에 실패 할 가능성이 높다든지 환자의 여건상 지속적인 항결핵제 투여가 어렵다고 생각될 때는 수술요법이 고려되어야 할 것으로 생각된다. 초치료실패후 재치료약제를 선택할 때는 이전에 사용한 초치료약제와 혼용처방이 되지않도록 주의해야 할 것으로 생각된다.

• 핵의학기술
• /
• 제15권2호
• /
• pp.3-12
• /
• 2011

본 연구는 방사성동위원소의 의학적 이용도가 증가함에 따라 의료기관 핵의학과 방사선관계종사자의 직무별 방사선 이용에 대한 개인 방사선피폭선량의 실태를 파악하여, 방사선 위험에 대해 경각심을 고취시키고, 방사선 관계종사자들에게 안전관리와 합리적인 피폭선량 관리에 도움을 주고자 분석하였다. 2010년 1월 1일부터 2010년 12월 31일까지 의료기관에서 근무하는 방사선종사자로 분류되어 개인 방사선피폭선량 측정을 정기적, 연속적으로 1년간 조사 관리된 540명의 종사자를 대상으로 부서별, 선량영역구간별, 근무기간별, 직무별 관련업무를 파악하여 심부선량에 대하여 연간평균피폭선량을 각각 분석하였다. 분석법으로는 빈도분석과 ANOVA를 시행하였다. 의료기관 방사선종사자의 부서별 연간피폭선량은 핵의학과 4.57 mSv로 가장 높았으며, 심장혈관중재술실 2.09 mSv, 마취통증의학과 1.42 mSv, 영상의학과 1.10 mSv, 구강악안면 방사선과 0.59 mSv, 방사선종양학과 0.50 mSv 순으로 높게 나타났다. 선량영역별 분포는 핵의학과, 심장혈관중재술실에서 5.01~19.05 mSv의 높은 선량영역분포를 보였으며, 부서별 방사선사의 연간피폭선량은 핵의학과 7.14 mSv로 가장 높은 피폭선량을 보이고 있으며, 심장혈관중재술실 1.46 mSv로 높았고, 영상의학과 0.97 mSv, 구강악안면방사선과 0.66 mSv, 방사선종양학과 0.54 mSv 순으로 나타났다. 세부업무에 따른 직무별 연간평균피폭선량은 싸이크로트론 관련 합성 업무 17.47 mSv로 가장 높은 피폭선량을 보였으며, Gamma camera 영상실 7.24 mSv, PET/CT 영상실 업무가 7.60 mSv로 높게 나타났고, 인터벤션 2.04 mSv, 심혈관중재술실 1.46 mSv, 일반촬영 1.21 mSv, Primart 치료실 0.90 mSv, 구강악안면방사선과 일반촬영 0.66 mSv 순으로 나타났다. 근무기간별, 선량영역별에 따른 연간평균피폭선량은 구강악안면방사선과에서는 10~14년 종사자가 1.01~3.00 mSv로 높은 평균선량을 보였고, 방사선종양학과는 모든 근무기간에 따라 0.00~1.00 mSv 의 낮은 선량영역구간에서 분포를 보였으며, 심혈관중재술실은 10~14년, 15~19년 근무에 따라 각각 1.01~3.00 mSv 선량영역구간에서 분포하였으며, 영상의학과에서는 1~4년, 5~9년 종사자가 각각 1.01~8.00 mSv의 가장 높은 선량영역구간에서 분포를 보였고, 핵의학과에서는 1~4년, 5~9년 종사자가 각각 3.01~19.05 mSv 의 가장 높은 선량영역구간에서 분포를 보였으며, 10~14년, 15~19년 종사자에서도 각각 3.01~15.00 mSv의 높은 선량영역구간에서 분포를 보였다. 이와 같은 결과로 볼 때 의료기관에서 근무하는 방사선관계종사자의 대부분이 현재의 방사선 안전관리가 실효성 있게 이루어지고 있었으며, 직무특성에 따라 많은 차이가 있는 것을 알게 되었다. 그러나 방사선 피폭을 최소화시키는 노력이 필요하며, 이를 위해서 체계적 교육과 합리적인 피폭량 관리를 위한 체계가 필요하다고 사료된다.

• Journal of Preventive Medicine and Public Health
• /
• 제24권3호
• /
• pp.363-372
• /
• 1991

백혈구수와 고혈압과의 관계를 알아보기 위해 1985년에 일부 농촌 거주자와 1986년에 일부 도시 거주자를 대상으로 혈액학적인 검사와 장기별로 기능검사를 통해서 건강선별조사를 했던 자료를 이용했다. 농촌거주자는 1985년에 경상북도 경산군에서 남자 206명, 여자 203명을 마을, 통, 반을 기준으로 다단계 집락추출법으로 추출했다. 도시 거주 대상자는 1985년 12월에 대구시에 거주하고 있는 20세 이상의 주민의 성별, 연령별 구성비율에 부합되게 농촌과 같은 표본추출방법으로 600명을 선정했으나 600명중 384명만이 본 조사에 응해주어서 나머지 인원은 피보험대상자들의 정기 신체검사를 위해 대학병원 건강관리과에 내원한 사람들 중에서 성, 연령을 짝지어서 추출했다. 이들 자료에서 백혈구수 측정이 빠진 사람, 고혈압력을 포함한 질병 유소견자와 검사상 극도의 비정상적인 수치를 보이는 자들을 농촌 거주자에서 36명 (8.8%), 도시 거주자에서 29명 (4.8%)을 제외시켜서 최종분석에 이용된 자는 도시가 571명, 농촌이 373명이었다. 백혈구수 측정은 ELT-8 Laser shadow method 를 이용했으며 단위는 $cells/mm^3$ 였다. 혈압 측정은 Aneroid 혈압계를 사용해서 표준화한 후 측정했다. 고혈압자의 정의는 수축기혈압 140 mmHg/확장기혈압이 90 mmHg 이상인 자로 했다. 농촌과 도시를 합한 총대상자에대해 고혈압자와 정상 혈압자간의 백혈구수의 평균을 비교하면 정상 혈압자에서 $6490.61{\pm}1941.32$, 고혈압에서 $6965.93{\pm}1997.01$로서 고혈압자에서 백혈구수의 평균이 통계적으로 유의하게 더 높았으며 (P=0.00), 농촌에서 동일한 방향의 유의한 차이를 보였다 (P=0.03). 그 외의 거주지와 성별로 층화한 각 층에서는 유의한 평균차이를 보이는 결과는 없었다. 총대상자에서 백혈구수 1/5분위수를 기준으로 했을 때 2/5분위수의 비차비가 0.99 (95% confidence interval, CI 0.62-1.59), 3/5분위수가 1.41 (95% CI 0.90-2.21), 4/5분위수가 1.76(95% CI 1.14-2.72), 5/5분위수가 1.80 (95% CI 1.15-2.82)로서 백혈구수가 증가 함에따라 고혈압의 유병율이 일정하게 상승하는 것을 알 수 있었으며 경향분석에서도 유의한 경향($X^2_{trend}=5.53,\;df=1,\;P<0.05$)을 나타내었다. 나머지 층에서는 유의한 비차비도 없었으며 유의한 경향 역시 보이지 않았다. 그러나 거주지와 성별로 층화한 각 층에서 연령, 흡연과 음주량을 다중지수회귀분석으로 통제를 했을 때 단일분석시 통계적인 유의성을 보였던 전체 대상자의 비차비는 통계적으로 유의하지 않게 되었고 그 크기 역시 작아지고 불안정해졌다. 전체적으로 비차비의 크기가 조금씩 줄었으며 경향분석에서도 유의한 경향을 보인 층은 없었다. 이러한 사실은 백혈구수와 고혈압과의 가설을 처음으로 제시했던 Friedman등의 연구가 고혈압의 예측변수를 찾기위해 800여개의 변수와 고혈압발생과의 관계를 보는 과정에서 우연히 발견된 통계적인 1종오차의 결과 일지도 모른다는 것을 시사해주는 결과이다.

• Journal of Nutrition and Health
• /
• 제41권1호
• /
• pp.65-76
• /
• 2008

본 연구는 저소득층 노인을 대상으로 하여 식생활 실태 및 건강상태를 조사하여 노인의 건강과 영양상태의 상호연관성 및 이에 영향을 미치는 위험 요인을 파악하고자 실시되었다. 조사는 광주광역시에 거주하는 저소득층 여자노인 92명을 대상으로 하였으며, 조사대상자를 연령에 따라 세 그룹 ($65{\sim}74$세, $75{\sim}84$세, 85세 이상)으로 체위, 혈액, 영양상태 등을 비교하였으며, Nutritional Screening Initiative (NSI) 점수에 따라 $NSI{\leq}3$은 영양 양호군, NSI > 3은 영양 위험군으로 구분하여 영양위험정도에 따른 식생활 관련 건강요인을 비교하였으며 연구결과를 요약하면 다음과 같다. 1) 본 조사대상자의 평균 연령은 79.0세이었으며, 사회경제적 수준이 매우 낮았으며, 치아건강상태 (70.7%) 및 경제적인 이유 (76.1%)로 음식섭취가 부실하였으며 혼자거동하기 힘든 여자 노인의 비율이 48.9%인데, 63.0%의 노인이 혼자 식사한다고 응답하여 저소득층 여자 노인의 사회경제적 위험 요인이 영양상태를 더욱 악화시키는 것으로 조사되었다. 2) 본 조사 대상자가 앓고 있는 주요 질병으로는 고혈압(42.9%), 관절염 및 신경통(33.0%), 당뇨병 (15.4%), 심혈관계 질환 (8.8%), 소화기계 질환 (8.8%) 등의 순이었다. 전체 여자 노인의 44.6%가 비만하였으며, 고혈압, 당뇨병, 심혈관계 질환 중 1개 이상의 질병을 보유한 노인이 53.3%, 대사 증후군을 보유한 노인이 49.3%로서 여자 노인의 건강상태가 전반적으로 불량한 것 판단되었다. 3) 조사대상자의 평균 체중은 54.5, 신장은 147.1cm로서 한국인 영양권장량설정을 위한 체위 기준치와 비교할 때 체중은 더 많은 반면 신장은 낮은 것으로 조사되었으며, 연령증가에 따라 체중과 체단백질이 감소한 반면 체지방은 감소되지 않았고, 체지방 비율이 40.0%, 허리둘레가 87.7cm에 달하였으며, BMI가 25.1 $kg/m^2$으로 전체적으로 비만한 경향을 나타내었다. 4) 연령에 따라 혈압에 유의적인 차이가 없었으며, 혈청알부민을 제외하고는 혈액의 지질성분, 면역성분, 항산화 성분에서 연령별로 유의적인 차이가 없었다. 여자 노인의 평균 수축기 혈압 143.0 mmHg, 공복 혈당은 119.7mg/dl로서 노인의 중요한 건강 문제는 고혈압, 당뇨 등임을 확인할 수 있으며, TNF-${\alpha}$수준이 높아 노년기 염증 반응 증가를 시사하였다. 5) 조사대상자의 영양상태는 매우 불량하였으며, 연령증가에 따라 영양섭취 실태가 더 불량해지는 경향을 나타내고 있으나 연령에 따른 유의적인 차이는 없었다. NSI 점수를 기준으로 하여, 영양 위험군 (NSI>3)에 비해 영양 양호군 $(NSI{\leq}3)$으로 구분된 노인의 하루 3회 이상의 식사 비율이 높았으며, 건강 인지도가 더 좋고, 우울증이 적었으며 운동 실시율이 높고, 당뇨 유병률이 낮았다. 6) 영양섭취 실태와 면역, 염증반응, 항산화 능과의 상관관계를 살펴 본 결과, 혈청의 IL-6와 $TNF-{\alpha}$가 영양상태와 유의적인 상관관계를 나타내어 항 염증성 인자보다는 염증유발인자가 노인의 영양상태와 관련이 있었으며, IL-2, TAS, 공복 혈당 등이 체위와 유의적인 관계가 있어 노인의 영양상태나 체위가 염증반응을 일으켜 노인의 건강에 영향을 미칠 수 있는 것으로 생각된다. 결론적으로, 연령이 증가함에 따라 생리적, 심리적, 사회경제적 요인이 노인의 영양상태에 복합적으로 작용하여, 영양불균형을 초래하고, 만성질환이 있는 경우에는 영양상태가 더욱 불량해지는 등의 건강상의 악순환을 초래하고 있다. 노년기에 건강한 삶을 유지하기 위해서는 적절한 영양소 섭취, 운동, 정상체중 유지가 중요하며 영양문제를 초래할 수 있는 위험요인을 줄여야 될 것이다. 특히, 노인이 양질의 식사를 할 수 있는 방안이 필요하며, 노인의 영양개선 및 건강 증진을 위해서 우리나라 노인의 식습관 및 영양상태, 체위, 질병 등에 관한 종합적이고 체계적인 연구방법에 대한 타당성 연구가 선행되어야 할 것이며 타당성 있는 연구결과를 바탕으로 하여 노인의 영양균형 및 건강증진을 위한 적절한 연구와 지원대책이 필요한 것으로 사료된다.

• 한국식품영양과학회지
• /
• 제36권12호
• /
• pp.1560-1570
• /
• 2007

본 연구는 2003년에 행해진 연구이나 일반적으로 라이프스타일은 미시적 차원인 특정개인으로부터 거시적 차원인 사회전체에 이르기까지 여러 규모의 차원으로 파악되고 있으며 이는 개인의 전반적인 활동이나 인식에 영향을 주는 생활양식의 개념으로 여겨지는 점과 다른 선행연구들을 살펴볼 때 일반적으로 10년을 주기로 라이프스타일에 따른 변화를 살펴본 연구들이 많은 점으로 미루어 볼 때 본 연구 결과가 현재의 라이프스타일을 반영할 수 있는 것으로 사료된다. 본 연구에서는 전국 남녀 대학생의 라이프스타일에 따른 신체계측, 식행동, 건강관련 생활습관 및 영양섭취실태를 비교하고자 설문조사를 실시하였으며 조사결과는 다음과 같다. 조사대상자의 연령은 남학생 평균 23.7세, 여학생 평균 21.6세였다. 남학생의 경우, 체중은 '개방적 유행추구형'군이 64.1 kg으로 다른 군에 비해 유의적으로 낮은 것으로 조사되었으며, 여학생의 경우, 신장과 체중은 '성취적 가족추구형'군이 평균 160.9 cm, 50.7 kg으로 '소극적절약 외모지향형'군의 평균 162.7 cm, 52.7 kg과 '개방적 유행추구형'군의 평균 163.1 cm, 53.0 kg에 비해 유의적으로 낮은 것으로 조사되었다. 균형 잡힌 식사 여부에 관한 질문에서 "항상 균형 잡힌 식사를 한다"고 응답한 비율은 '적극적 건강추구형'군이 23.3%로 다른 군에 비해 유의적으로 높은 응답율을 보였다. 신용카드로부터 식비 지출금액의 경우 '개방적 유행추구형'군이 월 평균 23.7만원을 사용한데 비해 '비소비 대인관계추구형'군은 월평균 8.5만원을 식비로 지출한다고 응답하여 유의적인 차이를 보였다. 건강관련 생활습관과 관련하여 '적극적 건강추구형'군이 다른 군에 비해 운동량은 많은 반면 음주와 흡연은 적게 하는 것으로 조사되었다. 결식의 경우 '소극적절약 외모지향형'군이 유의적으로 가장 적은 결식율을 보였으나 라이프스타일 유형과 상관없이 모든 대학생들의 하루 중 3끼 이상 결식하는 경우가 80% 이상으로 나타나 대학생들의 올바른 식습관 형성을 위한 영양교육이 필요한 것으로 사료된다. 체중조절을 하는 이유로는 '비소비 대인관계추구형'의 16.2%가 "건강을 위해서"라고 응답한 반면 '소극적절약 외모지향형'과 '개방적 유행추구형'의 24.8%와 26.3%가 "외모를 위해서"라고 응답하여 유의적인 차이를 보였으나 체중조절 방법으로는 대부분이 "약물복용", "운동요법", "비만클리닉" 등의 순인 것으로 조사되었다. 라이프스타일 유형에 따른 영양소 섭취상태는 남학생의 경우 '개방적 유행추구형'군이 '적극적 건강추구형'과 '성취적 가족추구형'군에 비해 유의적으로 높은 비타민 C의 섭취량을 보였으며 여학생의 경우 '적극적 건강추구형'군이 '성취적 가족추구형'군에 비해 유의적으로 낮은 비타민 $B_2$, 칼슘 및 철분 섭취량을 보였다. 그러나 전반적으로 볼 때 라이프스타일에 관계없이 남녀 대학생 모두 에너지와 칼슘 섭취량이 한국인 영양섭취기준의 70% 수준으로 나타났으며 특히 여학생의 경우 철분의 섭취량이 한국인 영양섭취기준의 80% 수준으로 매우 낮은 섭취율을 보였다. 이상의 결과로 볼 때 경제발전과 사회구조의 변화에 따라 대학생들의 식행동, 건강관련 생활습관 및 영양소 섭취실태도 라이프스타일에 따라 다르게 나타나는 것을 볼 수 있다. 그러므로 대학생 시기의 올바른 라이프스타일의 확립 및 영양밀도가 높은 식품섭취를 통해 건강한 생활을 영위할 수 있도록 학교나 지역사회 및 정부차원에서의 지속적이고 체계적인 영양교육이 필요하다. 또한 일단 성립된 바람직하지 않은 라이프스타일은 쉽게 변화하지 않으므로 이론 위주의 영양교육보다는 실제적인 행동변화를 유도할 수 있는 적극적인 영양교육 프로그램의 개발이 필요한 것으로 사료된다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.