• Journal of Ceramic Processing Research
• /
• v.19 no.5
• /
• pp.439-443
• /
• 2018

The outstanding characteristics of high quality GaN single crystal substrates make it possible to apply the manufacture of high brightness light emitting diodes and power devices. However, it is very difficult to obtain high quality GaN substrate because the process conditions are hard to control. In order to effectively control the formation of GaN polycrystals during the bulk GaN single crystal growth by the HVPE (hydride vapor phase epitaxy) method, a quartz ring was introduced in the edge of substrate. A variety of evaluating method such as high resolution X-ray diffraction, Raman spectroscopy and photoluminescence was used in order to measure the effectiveness of the quartz ring. A secondary ion mass spectroscopy was also used for evaluating the variations of impurity concentration in the resulting GaN single crystal. Through the detailed investigations, we could confirm that the introduction of a quartz ring during the GaN single crystal growth process using HVPE is a very effective strategy to obtain a high quality GaN single crystal.

• Research in Mathematical Education
• /
• v.19 no.4
• /
• pp.247-265
• /
• 2015

Mathematics textbook plays a significant role in shaping students' learning of mathematics. Logic, rigor and abstraction as typical features of the formalization of mathematics, dominate mathematics textbooks around the world, which is regarded as one of the important origins of students' learning difficulties in mathematics. An innovative series of Chinese mathematic textbooks is presented in this paper. Supported by the supplementary materials excerpts from the textbooks, it gives a comprehensive theoretical analysis of the principles of design and implementation of this series of mathematics textbooks. The effectiveness of this series of textbooks is demonstrated by student achievement and secondary research data. It shows that series of Chinese mathematic textbooks has largely decreased students' learning difficulties in mathematics and enhance classroom teaching efficiency. It suggests that prioritizing the essence of mathematics and reducing abstraction is an important notion for mathematics textbook design and implementation.

• Carbon letters
• /
• v.12 no.3
• /
• pp.180-183
• /
• 2011

Li metal is accepted as a good counter electrode for electrochemical impedance spectroscopy (EIS) as the active material in Li-ion and Li-ion polymer batteries. We examined the existence of signal noise from a Li-metal counter quantitatively as a preliminary study. We suggest an electrochemical cell with one switchable electrode to obtain the exact impedance signal of active materials. To verify the effectiveness of the switchable electrode, EIS measurements of the solid electrolyte interphase (SEI) before severe $Li^+$ intercalation to SFG6 graphite (at > ca. 0.25 V vs. Li/$Li^+$) were taken. As a result, the EIS spectra without the signal of Li metal were obtained and analyzed successfully for the following parameters i) $Li^+$ conduction in the electrolyte, ii) the geometric resistance and constant phase element of the electrode (insensitive to the voltage), iii) the interfacial behavior of the SEI related to the $Li^+$ transfer and residence throughout the near-surface (sensitive to voltage), and iv) the term reflecting the differential limiting capacitance of $Li^+$ in the graphite lattice.

• Transactions of Materials Processing
• /
• v.7 no.5
• /
• pp.496-504
• /
• 1998

The eccentric extrusion and bending process for the forming of the curved rectangular hollow tube is newly developed. Generally the bending process of hollow tube is the secondary process followed by the extrusion process of the hollow tube from the round billet. So many defects such as wrinkling and the difference of wall thickness can be happened during the secondary bending process. In order to avoid the defects the new process named as "the eccentric extrusion and bending process" is suggested and applied to the U-bending of rectangular hollow tube. In this paper the kinematically admissible velocity field between the dies surface and the internal plug boundary surface s developed for the curving velocity. By the using of this curving velocity field the curvature of extruded products can be calculated with the parameters such as eccentricity dies length friction constant aspect ratio.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.8 no.1
• /
• pp.76-82
• /
• 1999

Zinc phosphate cement has long been the material of choice for permanent luting of cast restorations, and through many years of use has been considered effective to retain castings. However, cast restorations cemented with this material have been susceptible to secondary caries. Glass ionomer luting agents become available in the late 1970s. These material s, through release of fluoride, show considerable promise as a means of reducing secondary caries. Other favorable traits include significantly less disintegration in vivo than zinc phosphate cements, a film thickness comparable to that of zinc phosphate cement, and adhesion to tooth structure. Compomer materials were created in 1993 as a filling material for deciduous teeth, cervical lesions, and class III cavities. In the meantime, compomer have been developed as chemical hardening cements for cast gold restorations. The aim of this paper is to review the articles on luting cements to help the choice of dental cements.

• Korean Journal of Health Education and Promotion
• /
• v.10 no.2
• /
• pp.22-31
• /
• 1993

Presently, in the countries, such as America and Japan which are better in socio-economical conditions than Korea, in Taiwan which is similar in them to us, and even in Thailand and Philippine which are thought lower in them, health education is taught as one of curricular subjects in elementary and secondary school levels. In Korea, however, the importance of teaching health education as a curricular subject has been recognized among many professionals of health since a long time ago. Along with current rapid development of polytechnique and industry, various kinds of serious health hazard have appeared even in our daily life, so it has been urgently needed that people have comprehensive knowledge and skills to resolve one's own health problems. Among various conditions needed to resolve the health problems in our society, it is one of the most effective precedures that health education is taught as a curricular subject at least in elementary and secondary school levels. For this, the followings are inevitable ; reformation of school health organization and laws involving health, development of teaching materials in health and training of health educators.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.1065-1070
• /
• 2001

The present age, it has been often reported that recycling of wasted glasses should be a great topic in related business circles. For the enviromental reasons, a public institution are looking for the ways of recycling these waste glasses. Consequently, the purpose of this research is to recycle crushed and powdered waste glasses by substituting for the cement in mortar and concrete. First of all, the optimum replacement ratio of Powdered Waste Glasses(PWG) can be obtained from the pilot test results. Secondary, we make advances in recycling of waste glasses as recycled to make secondary concrete products. So, we manufactured concrete brick and block contained powdered waste glasses by through mortar pilot test.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.329-334
• /
• 2002

The present age, it has been often reported that recycling of wasted glasses should he a great topic in related business circles. For the enviromental reasons, a public institution are looking for the ways of recycling these waste glasses. First of all, the purpose of this research is to recycle crushed and powdered waste glasses by substituting for the cement in mortar and concrete. the optimum replacement ratio of Powdered Waste Glasses(PWG) can be obtained from the pilot test results. Secondary, we made advances in recycling of waste glasses as recycled to make secondary concrete products. so, we manufactured concrete brick, block and interlocking block for side walk contained powdered waste glasses. finally, we compare properties among of concrete products to slove the economical and environmental problems.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.7
• /
• pp.99-104
• /
• 2009

Creep characteristic is an important failure mechanism when evaluating engineering materials that are soft as polymers or used as mechanical elements at high temperatures. One of the popular thermo-elastic plastics, Polyethylene(PE) which is used broadly for engineering purposes, as it has good properties and merits compared to other plastics, was studied for creep characteristic at various level of stresses and temperatures. From the experimental results, the creep limit of PE at room temperature is 75% of tensile strength. Also the creep limits decreased exponentially as the temperatures increased, up to 50% of the melting point. Also the secondary stage among the three creep stages was nonexistent nor was there any rupture failure which occurred for many metals.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.269-272
• /
• 1997

The Lithium ion secondary battery has been developed for high energy density of portable electrical device and electronics. Among the many conductive polymer materials, the positive active film for Li polymer battery system was synthesized successfully from polyphenylene diamine(PPD) by chemical polymerization in our lab. And PPD-DMcT(2, 5-dimercapto-1, 3, 4-thi-adiazole) composite flim conductive material, at high temperature was also prerared with the addition of dimethylsulfoxide(DMSO). The surface morphology and thermal stability of prepared composite flim was carried out by using SEM and TGA, respectively. Electrochemical and electrical conductivity of composite flim were also discussed by cyclic voltammetry and four-probe method in dry box(<27pm). And the electrode reaction mechanism was detected and analyzed from the half cell unit battery system.