• Corrosion Science and Technology
• /
• v.15 no.3
• /
• pp.135-140
• /
• 2016

Piping and equipment are degraded by flow-accelerated corrosion (FAC) in nuclear power plants. FAC causes numerous problems and nuclear utilities maintain programs to control FAC. The key parameters influencing FAC are hydrodynamic conditions, water chemistry, and effect of materials. Recently, a nuclear utility has planned slight power uprates in Korea. Operating conditions need to be changed in the secondary system according to power uprates. This study analyzed the effect of wall-thinning caused by power uprates. The change of operation data in the secondary cycle is reviewed, and wall-thinning rates are analyzed in the main lines. As a result, two phase (mixture of water and steam) lines have a greater impact than a water line under power uprate conditions. Also, the quality of steam is the most important factor for FAC in two phase lines.

• Journal of Plant Biology
• /
• v.14 no.4
• /
• pp.14-18
• /
• 1971

Lilium Miquelianum Makino is a species which originated in Korea. The Karyotype of the species was examined in materials collected at Mts. Kaya, Kasan, Chejung, and Kaji. The results are as follows: 1) The somatic chromosome number was found to be 2n=24. 2) The karyotype is described as: K=2Am＋2Bkm＋2Csst＋2Dsst＋2Ests＋2Fst＋2Gst＋2Hst＋2Ist＋2Jsst＋2Kst＋2Lst m: metacentric, sm: submetacentric st: subtelocentric, s: secondary constriction 3) A single subcentric supernumerary B-chromosome was found in some bulbs from Mt. Kasan. 4) The shape of the supernumerary B-chromosome was similar to that of the E chromosome which had separated at its secondary constriction and lost its lower chromosome fragment. 5) From three to eight nucleio of varying sizes were found in the telophase or interphase nucleus of root tip cells. The maximum number of eight nucleoli corresponds to the number of chromosomes that have a secondary constriction.

• Journal of The Korean Association For Science Education
• /
• v.11 no.2
• /
• pp.13-21
• /
• 1991

For development of teaching model for observational experiment and the major contents of science education guide books published for secondary school teacher in America, the actual survey to the secondary schools and the investigation of science education guide were carried out. The results were summarized as follows. 1. The major concepts of contents in science education books are constituted of introduction(9.67%), ability(8.94%), activity(6.61%), curriculum(11.61%), instruction planning(5.25%), instruction strategy(l7.74%), materials and facilities(1O.97%), evaluation(8.62%), society and community(l0.55%), guidelines(4.76%), practice(3.54%), and index(1.74%). 2. The constitution of multimedia teaching model for observational instruction was developed and arranged in order of six steps as observation, materialization, broad understanding, advanced study, application, and synthesis. This model was thought as the most effective for the achievement of the instructive goal for observational unit and others.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.284-286
• /
• 1989

This paper describes the synthesis method of polyaniline and the characteristics of polyaniline/Zn and polyaniline/Li secondary batteries. Polyaniline was synthesized chemical or electrochemical method and then used as cathod active materials to investigate the characteristics of polyaniline/Zn and polyaniline/Li secondary batteries. Characteristics of polyaniline/Zn battery was affected by additives such as graphite powder and carbon black. Internal resistance, energy density and energy efficiency of polyaniline/Li secondary battery were $167{\Omega}$, 140.7 Wh/kg and 95.6%, respectively.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.2
• /
• pp.88-93
• /
• 2007

Nano-sized Sn particles were coated with Ni-P layer using an electroless deposition method and their anodic performance was tested for lithium secondary batteries. Uniform coating layers were obtained, of which the thickness was controlled by varying the $Ni^{2+}$ concentration in the plating bath. It was found that the Ni-P layer plays two important roles in improving the anodic performance of Sn powder electrode. First, it prevents the inter-particle aggregation between Sn particles during the charge/discharge process. Second, it provides an electrical conduction pathway to the Sn particles, which allows an electrode fabrication without an addition of conductive carbon. A pseudo-optimized sample showed a good cyclability and high capacity ($>400mAh\;g^{-1}$) even without conductive carbon loading.

• International Journal of Automotive Technology
• /
• v.5 no.1
• /
• pp.23-31
• /
• 2004

Secondary movements of piston in the bore clearance are closely related to the side impact to the engine block as well as many tribological problems. Some of the major parameters that influence these kinds of movements are piston profile shapes (barrel and flat), piston pin offsets and the magnitudes of bore clearances. In our study, computational investigations are performed about the piston movements in the bore clearance by changing the skirt profiles and piston offsets. In this work, it is found that curved profile and larger offset magnitude to thrust side provide better performance that has low side impact during the engine cycle.

• Corrosion Science and Technology
• /
• v.5 no.6
• /
• pp.189-195
• /
• 2006

Effects of tungsten (W) on the precipitation kinetics of secondary phases and the associated resistance to pitting corrosion of 25%Cr duplex stainless steels were investigated through microstructural and electrochemical noise analyses. With the partial substitution of W for Mo in duplex stainless steel, the potential and current noises of the alloy were significantly decreased in chloride solution due to retardation of the ${\sigma}$ phase precipitation. The preferential precipitation of the $\chi$ phase in the W-containing alloy during the early period of aging contributed to retarding the precipitation of the $\sigma$ phase by depleting W and Mo along grain boundaries. In addition, the retardation of the nucleation and growth of the $\sigma$ phase in the W-containing alloy appears to be attributed to the inherently low diffusivity of W compared with that of Mo.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.1
• /
• pp.45-49
• /
• 1990

${\alpha},{\omega}$-Diols react with secondary amines in the presence of a catalytic amount of ruthenium catalyst at $180^{\circ}C$ to give diamino compounds in good to excellent yields. The yield of diamino compound was affected by the molar ratio of ${\alpha},{\omega}$-diol to secondary amine. The reaction is affected by the nature of the phosphorus ligands employed and the effectiveness of the added ligand is completely different depending on the chain length of the ${\alpha},{\omega}$-diol. The reaction between ethylene glycol and primary amine in the presence of a catalytic amount of ruthenium catalyst gave 1,4-disubstituted piperazine.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.7 no.3
• /
• pp.61-66
• /
• 2011

The integrity of the SG(Steam Generator) tubes has been challenged by numerous factors such as flaws, operation, atmosphere, inherently degraded materials, loose parts and even human errors. Of the factors, loose parts(or foreign materials) on the secondary side of the tubes can bring about volumetric defects and even leakage from the primary to the secondary side in a short period of time. More serious concerns about the loose parts are their unknown influx path and rapid growth rate of the defects affected by the loose parts. Therefore it is imperative to detect and characterize the foreign materials and the defects. As a part of the measures for loose part detection, TTS(Top of Tubesheet) MRPC(Motorized Rotating Pancake Coils) ECT has been carried out especially to the restricted high probability area of the loose part. However, in the presence of loose parts in the other areas, wide range loose part detection techniques are required. In this study, loose part standard tube was presented as a way to accurately detect and characterize loose part signals. And the SG tube ECT bobbin coil and MRPC ISI(In-service Inspection) data of domestic OPR-1000 and Westinghouse Model F(W_F) were reviewed and consequently, comprehensive loose part detection technique is derived especially by applying bobbin coil signals

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.348-355
• /
• 2023

Magnesium secondary batteries are attracting much attention due to their potential to replace conventionally used lithium ion batteries. Magnesium secondary battery cathode material Mo₆S₈ were synthesized by molten salt synthesis method and PVC as a carbon materials were added to improve electrochemical properties. Crystal structure, size and surface of the synthesized anode materials were measured through XRD and SEM. Charge-discharge profiles and rate capabilities were measured by battery test system. 2.81 wt% PVC coated sample showed the best rate capabilities of 85.8 mAh/g at 0.125 C-rate, 69.2 mAh/g at 0.5 C-rate, and 60.5 mAh/g at 1 C-rate.