• Multiscale and Multiphysics Mechanics
• /
• v.1 no.1
• /
• pp.15-33
• /
• 2016

In this paper, an asymptotic method is employed to formulate nano- or micro-beams based on strain gradient elasticity. Although a basic theory for the strain gradient elasticity has been well established in literature, a systematic approach is relatively rare because of its complexity and ambiguity of higher-order elasticity coefficients. In order to systematically identify the strain gradient effect, an asymptotic approach is adopted by introducing the small parameter which represents the beam geometric slenderness and/or the internal atomistic characteristic. The approach allows us to systematically split the two-dimensional strain gradient elasticity into the microscopic one-dimensional through-the-thickness analysis and the macroscopic one-dimensional beam analysis. The first-order beam problem turns out to be different from the classical elasticity in terms of the bending stiffness, which comes from the through-the-thickness strain gradient effect. This subsequently affects the second-order transverse shear stress in which the surface shear stress exists. It is demonstrated that a careful derivation of a first strain gradient elasticity embraces "Gurtin-Murdoch traction" as the surface effect of a one-dimensional Euler-Bernoulli-like beam model.

• Journal of Distribution Science
• /
• v.12 no.7
• /
• pp.23-35
• /
• 2014

Purpose - This study aims to explore the effects of social responsibility activities and business ethics practices on corporate trust and loyalty in the context of a large retail distribution business. Research design, data, and methodology - The data collected was analyzed using PASW Statistics 18.0. In order to verify the demographic characteristics, frequency analysis was conducted on the data. Results - The results of the study were as follows. First, social responsibility activities had a significant effect on corporate trust. Second, both corporate social responsibility activities and business ethics practices had significant effects on loyalty. Third, corporate trust had a significant effect on loyalty. Fourth, corporate social responsibility activities and consumer protection activities had a partial mediation effect, while environmental protection activities and social contribution activities had complete mediation effects. Conclusions - This study clarified and explained the factors of corporate social responsibility activities and business ethics practices that customers value, and analyzed the influence of these factors on corporate trust and loyalty.

• English Language & Literature Teaching
• /
• v.16 no.3
• /
• pp.1-18
• /
• 2010

This study examined the effects of previewing and providing background knowledge on low level EFL readers' comprehension of expository texts and their responses to these treatments. 130 college freshmen were randomly placed into one of three treatment groups and read two expository texts reflecting unfamiliar cultural information. Prior to reading, one group was given previewing instruction, which included vocabulary preteaching and summaries, and a second group was provided with culture-specific background knowledge through watching videos and slides. The third group read each text without any prereading instruction. Immediately after reading a passage, subjects answered a 10-item multiple-choice test. Results showed significant positive effects of the previewing treatment and weak positive effects of the providing background knowledge treatment. Students' responses on the questionnaires revealed that the majority felt that the experimental treatments contributed to comprehension enhancement, made reading more enjoyable, and expedited their reading process. Students in the control group, however, indicated that they needed explicit prereading instruction in order to understand the texts. Pedagogical implications of the findings for EFL reading instruction are provided.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.1
• /
• pp.39-47
• /
• 2009

The effects of thermo-solutal convection on mercurous chloride system of ${Hg_2}{Cl_2}$, and Ne during physical vapor transport are numerically investigated for further understanding and insight into essence of transport phenomena, For $10\;K{\le}{\Delta}T{\le}30\;K$, the growth rate slowly increases and, then is decreased gradually until ${\Delta}T$=50 K, The occurrence of this critical point near at ${\Delta}T$=30 K is likely to be due to the effects of thermo-physical properties stronger than the temperature gradient corresponding to driving force for thermal convection. For the range of $10\;Torr{\le}P_B{\le}300\;Torr$, the rate is second order-exponentially decayed with partial pressures of component B, $P_B$. For the range of $5{\le}M_B{\le}200$, the rate is second order-exponentially decayed with a function of molecular weight of component B, $M_B$. Like the case of a partial pressure of component B, the effects of a molecular weight arc: reflected through the binary diffusivity coefficients, which are intimately related with suppressing the convection flow inside the growth enclosure, i,e., transition from convection to diffusion-dominant flow mode as the molecular weight of B increases. The convective mode is near at a ground level, i,e., on earth (1 $g_0$), and the convection is switched to the diffusion mode for $0.1\;g_0{\le}g{\le}10^{-2}g_0$, whereas the diffusion region ranges from $10^{-2}g_0$ up to $10^{-5}g_0$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.857-864
• /
• 1998

The infuluence of Doppler effects on the tracking performance of a noncoherent second-order delay locked loop (DLL) operating on a data modulated signal is investigated. For the perfoermance analysis we consider the tracking accuracy (steady state error and jitter) of the linear DLL and the reliability of the nonlinear loop. The nonlinear analysis concerning the loop reliability makes use of an asympototic expansion for the MTLL(mean time to lose lock) which has been derived by applying the singular perturbation method. In particular, we give optimal loop parameters and the optimal bandwidth of the bandpass filter in the loop arms to achieve a maximum MTLL. Since Doppler effects can be producesd comparatively in LEO system, we can espect the more reliable DLL loop design. by using the results of the circuit simulation, the delay lock loop is synthesized in FPGA, and verified to get the GPS data from the STR-2770 GPS simulator system. So, the synthesized logic circuit is shown be accurately performed.

• Computers and Concrete
• /
• v.2 no.1
• /
• pp.31-53
• /
• 2005

In the present structural codes the safety verification is based on a linear analysis of the structure and the satisfaction of ultimate and serviceability limit states, using a semi-probabilistic security format through the consideration of partial safety factors, which affect the action values and the characteristic values of the material properties. In this context, if a non-linear structural analysis is wanted a difficulty arises, because the global safety coefficient, which could be obtained in a straightforward way from the non-linear analysis, is not directly relatable to the different safety coefficient values usually used for the different materials, as is the case for reinforced concrete structures. The work here presented aims to overcome this difficulty by proposing a methodology that generalises the format of safety verification based on partial safety factors, well established in structural codes within the scope of linear analysis, for cases where non-linear analysis is needed. The methodology preserves the principal assumptions made in the codes as well as a reasonable simplicity in its use, including a realistic definition of the material properties and the structural behaviour, and it is based on the evaluation of a global safety coefficient. Some examples are presented aiming to clarify and synthesise all the options that were taken in the application of the proposed methodology, namely how to transpose the force distributions obtained with a non-linear analysis into design force distributions. One of the most important features of the proposed methodology, the ability for comparing the simplified procedures for second order effects evaluation prescribed in the structural codes, is also presented in a simple and systematic way. The potential of the methodology for the development and assessment of alternative and more accurate procedures to those already established in codes of practice, where non-linear effects must be considered, is also indicated.

• The Research Journal of the Costume Culture
• /
• v.10 no.2
• /
• pp.200-212
• /
• 2002

The purpose of this study is to make the internet website on the order-made fashion design so as to do meet the need of netizen in the 21st century. It made the consumer do the design which he or she wants by the combination of the compositions that do select the pattern of the skirt design to fit his or her size and body shape. For the set-up of website, the elements of composition must be considered, and also the planning and design must be done fur the order-made fashion design. With the internet website, it's possible to do reach the below points; first, it can make the consumer do the design which he or she wants by himself or herself; second, it can provide him or her the information of measuring his or her body shape to buy the design pattern which he or she wants. Third, it can be contributed to make the brand more active by improving his or her satisfaction with the design and pattern which he or she wants. Also it can bring up the effects as fellows; first, lashing power of the design can be increased by the order-made fashion design to attract his or her interest, and also it can make him or her more satisfied. Second, the competitiveness can be strengthened by the differentiation of the fashion site between the existing design and the order-made fashion design. Third, the production of design can be higher and also its expense can be reduced even for the small and medium-sized clothes maker or merchants. Finally, it is able to enlarge the applicable field into the design of small articles, home fashion, and textile which they want to sell the differentiated and order-made products.

• Korean Journal of Cognitive Science
• /
• v.21 no.2
• /
• pp.253-282
• /
• 2010

Two experiments were conducted to explore the effects of anaphora and demonstrative ellipsis on reference resolution. This study assumed that two type of ellipsis could be sensitive to antecedents' saliency: the reverse typicality and mention order of antecedents. The muti-task approach measured the antecedent's activation level and processing load for the conflict resolution of theories of anaphoric resolution. In Experiment 1, using ellipsis for anaphora, participants read a series of sentence pairs by self-paced and performed a probe recognition test. The results showed the main effects of antecedent's typicality and mention order in both tasks. In Experiment 2, using noun phrase without demonstrative for anaphora, participants read a series of sentence pairs by self-paced and performed a probe recognition test. The results showed main effects of mention order of antecedents for probe recognition task only. The first antecedent was recognized faster than the second one. The results of two experiments suggested that anaphora type and antecedent's saliency were dynamically interact in reference resolution for Korean.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.290-297
• /
• 2009

A two-phase (gas and liquid) flow analysis solver, named CUPID, has been developed for a realistic simulation of transient two-phase flows in light water nuclear reactor components. In the CUPID solver, a two-fluid three-field model is adopted and the governing equations are solved on unstructured grids for flow analyses in complicated geometries. For the numerical solution scheme, the semi-implicit method of the RELAP5 code, which has been proved to be very stable and accurate for most practical applications of nuclear thermal hydraulics, was used with some modifications for an application to unstructured non-staggered grids. This paper is concerned with the effects of interpolation schemes on the simulation of two-phase flows. In order to stabilize a numerical solution and assure a high numerical accuracy, the second-order upwind scheme is implemented into the CUPID code in the present paper. Some numerical tests have been performed with the implemented scheme and the comparison results between the second-order and first-order upwind schemes are introduced in the present paper. The comparison results among the two interpolation schemes and either the exact solutions or the mesh convergence studies showed the reduced numerical diffusion with the second order scheme.

• Journal of Families and Better Life
• /
• v.27 no.2
• /
• pp.191-201
• /
• 2009

The Korean Government has recently prepared the comprehensive five-year basic plan (2006-2010) to deal with low fertility and population ageing. The basic plan aims at recovering the fertility rate to the appropriate level and improving the social and economic systems in preparation for the aged society. The main objective of this study was to examine the effects of fertility policies on childbirth by birth order. The data came from 1,729 adults who gave birth to babies in 2007 and 991 adults as the control group. The serial logistic regression analyses revealed that establishing the health and nutrition system for maternity and children, and expanding of tax and social insurance benefit were effective policy measures to increase childbirths of first children, while the policy measures establishing the health and nutrition system for maternity and children, supporting for daycare and pre-school education, and work-life balance were effective to childbirths of second or third children in 2007. However, the policies of supporting for costs of test-tube baby and expanding childcare infra didn't have any significant influences on childbirths in 2007. The implications of study results were discussed.