• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.737-742
• /
• 2017

Recently, unconventional high-rise building shapes have attracted attention as a landmark of metropolitan cities and the search for innovative building forms in architecture is ongoing. In this study, $Isotruss^{(R)}$ grid(ITG) used in smaller scale structures was applied to building structural systems and its structural performance was examined. The structural behavior of an ITG was compared with that of a diagrid structure as a reference structure. The stiffness-based design method of the diagrid system was used for the preliminary design stage of member sizing in an ITG. The structural design of 16, 32, and 48-story buildings was carried out for the two systems with the same size. The angle of the inclined columns for ITG and diagrid was $59^{\circ}$ and $68.2^{\circ}$, respectively. The lateral stiffness, steel tonnage of the exterior frame, axial strength ratio, story drift ratio, and natural frequency of the two systems were compared. Based on the analysis result of 6 buildings, the two systems had similar structural capacity; 93.3% and 88.7% of the lateral load was carried by the perimeter frame in the ITG system and diagrid system, respectively. This suggests that the ITG system is better in arranging core columns. Therefore, the proposed ITG system has not only a unique façade, but also substantial structural capacity equivalent to the existing system.

• 대한공업교육학회지
• /
• v.31 no.2
• /
• pp.233-256
• /
• 2006

The purpose of this study was to analyse between foreign curriculum and our high school industrial technology subject-matter curriculum, to review trend and stream of curriculum revision, and purpose and content system of subject-matter. This study was conducted through reviewing literature; research reference, journal, book, and Web materials. in this study, comparative target country was restricted to Japan, U. S. A., U. K., and N. Z., Australia that administer to similar subject with our industrial technology subject-matter. The major finding of this study were as follows: 1. A similar subject-matter with our industrial technology subject0matter was Japan' 'foundation of industrial technology' and 'project research', U. S. A.' 'technology' and etc, U. K.' 'design and technology', and N. Z.' 'technology', 'New South Wales in Australia' design and technology'. 2. The result of analysis to purpose and strength of subject-matter, our' industrial technology subject-matter was oriented to knowledge, understanding and career search in industrial area. but, the other was emphasized technological problem solving by process-based method with thinking and action. 3. In the curriculum content, our country was treat to content area of a broad industrial world. on the other hand, Japan; relationship between human and technology, environment, process technology and product technology, project research. U. S. A.; technology content standards by knowledge, process and context, U. K., N. Z., and Australia were focused 'design process'. Based on above results, the recommendation can be established as follows: 1. A study on the implementation of industrial technology curriculum. 2. A study on the perception and need assessment of expert and stakeholder about purpose and content system. of industrial technology subject-matter.

• Journal of KIISE:Databases
• /
• v.36 no.2
• /
• pp.112-122
• /
• 2009

The EPCglobal leading the development in RFID standards proposed Event Cycle Specification (ECSpec) and Event Cycle Reports (ECReports) for the standard about RFID middleware interface. ECSpec is a specification for filtering and collecting RFID tag data and is treated as a Continuous Query (CQ) processed during fixed time intervals repeatedly. ECReport is a specification for describing the results after ECSpec is processed. Thus, it is efficient to apply Query Indexing technique designed for the continuous query processing. This query index processes ECSpecs as data and tag events as queries for efficiency. In logistics environment, the similar or same products are transferred together. Also, when RFID tags attached to the products are acquired, the acquisition events occur massively for the short period. For these properties, it is inefficient to process the massive events one by one. In this paper, we propose a technique reducing similar search process by considering tag events which are collected by the report period in ECSpec, as a range query. For this group processing, we suggest a queuing method for collecting tag events efficiently and a structure for generating range queries in the queues. The experiments show that performance is enhanced by the proposed methods.

• Journal of radiological science and technology
• /
• v.25 no.2
• /
• pp.57-64
• /
• 2002

The recent development of embodiment technology of the medical images makes most medical institutions introduce PACS(Picture Archiving and Communication System) in haste. However lots of PACS solutions, currently developed and distributed, haven't been able to serve the convenience of users and to satisfy user's demand because of economic limitations and administrator-oriented considerations in the process of development. So we have developed MIH(Medical Image History), by which we can search and refer to the patient's medical images and information with few restrictions of time and space for diagnosis and treatment. This program will contribute to the improvement in the medical environment and meet the clients' need. We'll make more effort to develop the application which insures the better quality of medical images. MIH manages the patient's image files and medical records like film chart in connection with time. This trial will contribute to the reduction of the economical loss caused by unnecessary references and improve the quality in the medical services. The demand on the development or the program which refers to the medical +ata quickly and keeps them stable will be continued by the medical institute. This will satisfy the client's demand and improve the service to the patients in that tile program will be modified from the standpoint of the users. MIH is trying to keep user-oriented policy and to apply the benefit of the analog system to the digital environment. It is necessary to lead the public to the better understanding that the systematic management and referring of the medical images is as important as the quality of the images.

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.101-108
• /
• 2004

The new transit fare in the Seoul Metropolitan is basically determined based on the distance-based fare system (DBFS). The total fare in DBFS consists of three parts- (1) basic fare, (2) transfer fare, and (3) extra fare. The fixed amount of basic fare for each mode is charged when a passenger gets on a mode, and it proceeds until traveling within basic travel distance. The transfer fare may be added when a passenger switches from the present mode to another. The extra fare is imposed if the total travel distance exceeds the basic travel distance, and after that, the longer distance the more extra fare based on the extra-fare-charging rule. This study proposes an algorithm for finding minimum fare route in DBFS. This study first exploits the link-label-based searching method to enable shortest path algorithms to implement without network expansion at junction nodes in inter-modal transit networks. Moreover, the link-expansion technique is adopted in order for each mode's travel to be treated like duplicated links, which have the same start and end nodes, but different link features. In this study, therefore, some notations associated with modes can be saved, thus the existing link-based shortest path algorithm is applicable without any loss of generality. For fare calculation as next steps, a mathematical formula is proposed to embrace fare-charging process using search process of two adjacent links illustrated from the origin. A shortest path algorithm for finding a minimum fare route is derived by converting the formula as a recursive form. The implementation process of the algorithm is evaluated through a simple network test.

• Journal of the Korean Society of Physical Medicine
• /
• v.5 no.2
• /
• pp.193-201
• /
• 2010

Purpose : This study achieved to search the effect of the circuit exercise and conventional exercise on walking ability(walking speed, endurance, dynamic balance, speed, endurance and pedestrian crossing) in chronic stroke. Methods : Since is diagnosed by stroke, to 30 chronic stroke patients who more than 1 year past the 15 circuit exercise group, the 15 conventional exercise group random the circuit exercise group applied circuit exercise 3th 8 weeks each week after neurological treatment because assigning and the conventional exercise group executed round trip walk exercise in parallel bar 3th 8 weeks each week after neurological treatment. The data of 25 patients who complete experimental course were statistically analysed. Results : The results of this dissertation were as following : 1) There were significantly increased after experimental of 10 meter walk test, 6 minutes walk test and Timed "Up and Go" test in circuit exercise group (p<.001). 2) There were significantly increased after experimental of 2, 4 and 6 lane road crossing mobility in Walking circuit exercise group(p<.01). 3) There were significantly differences after experimental of 10 meter walk test, 6 minutes walk test and Timed "Up and Go" test change quantity between circuit exercise group and conventional exercise group(p<.05). 4) There were correlations were found between the TUG test and 2, 4 and 6 lane road (2 lane road; r=.463, p<.01., 4 lane road; r=515, p<.01., 6lane road; r=.710, p<.01), and there were correlations were found between the 10 meter walk test and 6 minutes walk test(r=.595, p<.01), TUG test(r=.662, p<.01) and 6 lane road(r=.527, p<.01). Conclusion : Even if improvement of walk function through training consists in room, transfer of actuality pedestrian crossing is no change outside the room. Because it is much variable of the weather, seasonal factor, temperature, pedestrian number, state of underneath etc. outside the room. Then, in room after direction promotion of walk function to be promotion of walk function in actuality life and need development of connectable training method consider.

• Korean Journal of Acupuncture
• /
• v.37 no.3
• /
• pp.131-144
• /
• 2020

Objectives : The aim of this study is to analyze the details of acupuncture treatment methods and the reporting quality of acupuncture on Carpal Tunnel Syndrome (CTS). Methods : Search was conducted in Pubmed, EMBASE, and Cochrane Library for acupuncture studies on CTS. The reporting quality of acupuncture treatment was assessed using the following guidelines: Standards for Reporting Interventions in Clinical Trials of Acupuncture (STRICTA) for analyzing the method of acupuncture treatment, Consolidated Standards of Reporting Trials (CONSORT) for analyzing study design and study process, and Risk of Bias (ROB) for analyzing bias. The number of reported items was calculated and evaluated as a proportion. The reported proportion of each study was classified into three grades: Grade A (% score ≥75), Grade B (50≤ % score <75), and Grade C (% score <50). Results : A total of 9 Randomized Controlled Trials (RCTs) were included in this study. All trials reported 12 items (66.67%) on average in STRICTA guidelines. Five studies were conducted with manual acupuncture and 3 studies were conducted with electroacupuncture. PC7 (Daereung) was most frequently used to treat CTS. In STRICTA guideline evaluation, 3 studies were classified as Grade A, 5 studies were classified as Grade B, and 1 study was classified as Grade C. In the CONSORT statement assessment, all trials reported an average of 20.56 items. Of the 9 RCTs, 6 studies were classified as Grade B and 3 studies were classified as Grade C. In ROB assessment, most studies showed a low (63.49%) or unclear (26.98%) risk of bias. The selective reporting bias and the incomplete outcome data bias were found to have the lowest risk of bias, and the allocation concealment of selection bias was found to have the most unclear risk of bias. Conclusions : Recent acupuncture studies on CTS showed moderate reporting quality. However, more detailed reports on acupuncture are still needed to establish more solid evidence of acupuncture treatment.

• Korean Journal of Ecology and Environment
• /
• v.48 no.3
• /
• pp.195-202
• /
• 2015

We identified research trends for freshwater exotic species in South Korea using text mining methods in conjunction with bibliometric analysis. We searched scientific and common names of freshwater exotic species as searching keywords including 1 mammal species, 3 amphibian-reptile species, 11 fish species, 2 aquatic plant species. A total of 245 articles including research articles and abstracts of conference proceedings published by 56 academic societies and institutes were collected from scientific article databases. The search keywords used were the common names for the exotic species. The $20^{th}$ century (1900's) saw the number of articles increase; however, during the early $21^{st}$ century (2000's) the number of published articles decreased slowly. The number of articles focusing on physiological and embryological research was significantly greater than taxonomic and ecological studies. Rainbow trout and Nile tilapia were the main research topic, specifically physiological and embryological research associated with the aquaculture of these species. Ecological studies were only conducted on the distribution and effect of large-mouth bass and nutria. The ecological risk associated with freshwater exotic species has been expressed yet the scientific information might be insufficient to remove doubt about ecological issues as expressed by interested by individuals and policy makers due to bias in research topics with respect to freshwater exotic species. The research topics of freshwater exotic species would have to diversify to effectively manage freshwater exotic species.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.311-316
• /
• 2017

The network analysis method has emerged as a new methodology for various disciplines, due to its ability to provide a representative knowledge network of references, co-authors and keywords. Bulletproof technology is an interdisciplinary field involving various disciplines, such as material mechanics, structural mechanics, and ballistics, so it is essential to keep up with the recent trends in technological research. In this research, the recent R&D trends in the field of bulletproof materials were analyzed using keyword based network analysis. From the results, the core keywords were identified as 'Composite', 'Model' and 'Head' using the scholar search engine, google scholar. The centrality analysis for the core keywords showed that bulletproof technology has developed in 3 different areas, viz. material, structure and effects. To the best of our knowledge, this is the first application of (network analysis?) to bulletproof technology. Moreover, we are also convinced that the results of this study will be useful for defense technology planning and determining the direction of R&D in the field of bulletproof technology.

• Journal of KIISE:Software and Applications
• /
• v.29 no.7
• /
• pp.476-486
• /
• 2002

CBD(Component Based Development) has become the best strategical method for the business application. Because CBD is a new development paradigm which makes it possible to assemble the software components for application, it copes with the rapid challenge of business process and meets the increasing requirements for productivity. Since the business process is rapidly changing, CBD technology is the promising way to solve the productivity. Especially, the repository is the most important part for the development, distribution and reuse of components. In component repository, we can store and manage the related work-products produced at each step of component development as well as component itself. In this paper, we suggested a practical approach for repository construction to support and realize the CBD process and developed the CRMS(Component Repository Management System) as implementation product of the proposed techniques. CRMS can manage a variety of component products based on component architecture, and help software developers to search a candidate component for their project and to understand a variety of information for the component. In the paper, a practical approach for component repository was suggested, and a supporting environment was constructed to make CBD to be working efficiently. We expect this work wall be valuable research for component repository and the entire supporting Component Based Development Process.