• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.4 s.97
• /
• pp.122-128
• /
• 1999

Bolted joint assembly for nuclear power plants consists of various components : cover plate, retainer plate, manway flange, gasket and stud bolts/nuts. To guarantee the soundness of the joint, it is important to prevent leakage through the gasket and reduce the stress concentration factor at the thread root. In this paper, Submodeling technique for the finite element method is proposed to accurately compute three dimensional contact stresses which govern the sealing performance and the maximum contact stresses at the threads root. For verification of global solutions used as boundary conditions of submodel solution, the stresses on the cover plate and the manway flange are measured by strain gages when internal pressure is applied to the bolted joint assembly. The numerical results are compared with the experimental results.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.235-240
• /
• 2003

Auto transmission system is composed by torque converter. clutch, brake, planetary goat and valve body controlling oil pressure. In the automatic transmission, the most largest influence elements are torque converter and clutch for oil performance. In this piper I studied failure of tribology causing sealing poor of the acting parts, leakage of the oil pressure and poor of the lubrication.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.241-247
• /
• 2003

The sealing performance of O-ring is effected in environments of the O-ring seal, like that applied pressure, working temperature, pre-compressed ratio and materials. In this paper, design of composite O-ring under pressurized, compressed was optimized based on Taguchi experimental design method. and it analysed numerically using non-linear finite element method. Ogden model in which is developed based on the experimental data is used for simulating the contact stress and strain in NBR and PTFE materials. Sensitivity analysis was performed with FEM results, which are contact stress, strain and temperature as variable.

• Tribology and Lubricants
• /
• v.15 no.4
• /
• pp.297-303
• /
• 1999

O-rings in automotive engines are important components such as a coolant pipe, engine oil circulating lines and fuel injector for sealing that makes efficient performance of the engine. Life cycle of O-rings is effected in environments of the O-ring seal, like that applied pressure, working temperature, precompressed ratio and materials. It is related in extrusion, expansion and fatigue failure of O-rings. In this paper, an pressurized, compressed elastomeric O-ring inserted into a rectangular groove is analysed numerically using the nonlinear finite element method. The calculated FEM results showed that extrusion ratio and contact stress are strongly related to the gap clearance and edge radius of the groove.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.1173-1176
• /
• 2010

회전익 항공기의 연료탱크는 피탄으로 인해 연료 누유시 발생할 수 있는 화염으로부터 기체와 승무원의 생존성을 높이기 위하여 연료누설을 차단하는 자기밀폐 기능이 필수적으로 요구된다. 자기밀폐 기능은 내부에 적층된 자기밀폐 소재가 누설되는 연료와 화학반응을 일으켜 급속히 팽창됨으로써 피탄부를 막아, 연료누설을 차단하는 역할을 한다. 본 연구는 미군사규격(MIL-DTL-27422D) 기준으로 국내에서 제작 및 수행한 회전익 항공기의 연료탱크 자기밀폐 성능시험 평가 결과를 제시한다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.04a
• /
• pp.354-359
• /
• 2010

최근 성능기준에 의한 평가규정이 시행된 건축물 내화충전구조에 대해 관련 제도운영체계와 국내외 성능평가방법 및 성능기준을 살펴본 후 현재 기준의 보완점과 향후 개선방안에 대해 고찰하였다. 내화충전구조는 방화구획의 기능을 완성시키는 중요한 부분으로서 연구개발 및 시장활성화가 필요하며, 현장 품질을 확보 유지할 수 있는 관리체계가 필요하다. 한편 내화성능 뿐만 아니라 구조거동에 대한 대응 및 내구성에 대한 기술기준의 보완 마련이 필요하다.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.547-549
• /
• 2000

Silicone insulators have many advantages over porcelain insulators. Especially silicone insulators have good characteristics of impact hardness, surface insulation, ease of processing, mass productivity and don't have risk of bombardment and vandalism. Recently insulation part made by silicone are becoming widely used. In this paper we introduce the development of Sealing End for 132kV XLPE cable with silicone composite hollow insulator and the adoption of it to a actual transmission line in abroad. This paper contains of design procedure, structure, electrical performance of it.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.259-264
• /
• 2007

In this paper, to analyze the initial valued non-homogeneous elastic half space by the scaled boundary analysis, the infinite element approach was introduced. The free surface of the initial valued non-homogeneous elastic half space was mode1ed as a circumferential direction of boundary scaled boundary coordinate. The infinite element was used to represent the infinite length of the free surface. The initial value of material property(elastic modulus) was considered by the combination of the position of the sealing center and the power function of the radial direction. By use of the mapping type infinite element, the consistent e1ements formulation could be available. The performance and the feasibility of proposed approach are examined by two numerical examples.

• Journal of the Korean Magnetics Society
• /
• v.8 no.2
• /
• pp.93-98
• /
• 1998

Magnetic fluids have been used in the commercial area, e. g damping, sealing and hydrodynamic bearing. In this study, magnetic fluid was made for damping in loudspeaker. The magnetic fluids were snthesized by dispersing the magnetite powder which was obtained by precipitation method in Yubase oil. When the magnetic fluid was applied to a 6 cm tweeter, improvements of damping, centering and heat transger in a loudspeaker were noted. Also we compared the performance of the magnetic fluid with 20 % magnetite in the oil and the one of APG-815 (Niphon Ferrofluidic Co.)

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.65-67
• /
• 2014

There are many elastomeric joint sealant applications in construction such as structural glazing, weatherproofing and insulating glass fabrication etc. Each sealant joints require unique durability functions to perform well through building life cycle. Elastomeric joints in bathroom and kitchen is one of areas which require durable sealing. In this application, anti fungal durability is proprietary function of sealant during building life cycle. Premature failure of anti fungus resistance of sealant is putting big stresses to general contractor as well as the inhabitants due to costly rework and poor sanitation. Accordingly, when chemists design a product, they must take into account various parameters not only formulation components also test conditions in order to have long term fungal durability. This paper reviews several biocide options with various industry standards for fungus resistance performance to suggest making new test method for construction sealant industry.