• Spatial Information Research
• /
• v.19 no.2
• /
• pp.19-28
• /
• 2011

Three dimensional modeling for seafloor topography is essential to monitoring displacements in underwater structures as well as all sorts of disasters along the shore. MBES is a system that is capable of high-density water depth measurement for seafloor topography and is in broad uses for gathering 3D data and detecting displacements. MBES data, however, contain random errors that take place in the equipment offset and surveying process and require systematic researches on the correction of wrong depth measurements. Thus this study set out to propose a post-processing technique to eliminate an array of random errors taking place after equipment offset correction and basic noise correction in the MBES system and analyze its applicability to seafloor topography modeling by applying it to the subject area.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.6
• /
• pp.497-506
• /
• 2015

Gravity variations due to the 2011 Tohoku (M9.0) earthquake, which occurred at the plate boundaries near the northeastern coast of Japan, were estimated through the GRACE spherical harmonic (Stokes) coefficients derived from the CSR. About -5 μGal gravity variation by the GRACE data was found in the back-arc basin area with respect to a reference gravity model. The mean gravity variations in the back-arc basin area and the Japan Trench area were -4.4 and -3.2 μGal in order. The small negative gravity variations around the Japan Trench area can be interpreted by both crustal dilatation and the seafloor topography change in comparison with the large negative gravity variations in the back-arc basin area by co-seismic crustal dilatation of the landward plate. From the results of the gravity variations, vertical displacements generated from relatively short wavelength caused by the earthquake were estimated by use of multi-beam bathymetric measurements obtained from JAMSTEC. The maximum seafloor topography changes of about ±50 m were found at west side of the Japan Trench axis by the earthquake. The seafloor topography change by the megathrust earthquake can be considered as the results of the landslide of the seafloor throughout the landward side.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.1
• /
• pp.133-141
• /
• 2023

Accurate measurement of seafloor topography plays a crucial role in developing marine industries such as maritime safety, resource exploration, environmental protection, and coastal management. The seafloor topography is constructed using side scan sonar (SSS) and single beam echosounder (SBES) or multibeam echosounder (MBES), which transmit and receive ultrasound waves through a device attached to a marine survey vessel. However, the use of a sonar system is affected by noise pollution areas, and the single beam has a limited scope of application. At the same time, the multibeam is mainly applicable for depth observation. For these reasons, it is difficult to determine the boundaries and areas of seafloor topography. Therefore, this study proposes a method to improve the backscatter data of multibeam echosounder, which has a relationship with the seafloor quality, by using digital image processing to classify the shape of the underwater surface.

• Ocean Systems Engineering
• /
• v.1 no.3
• /
• pp.195-205
• /
• 2011

A method for calibrating a laser profiling system for seafloor micro-topography measurements is described. The system consists of a digital camera and an arrangement of six red lasers that are mounted as a unit on a remotely operated vehicle (ROV). The lasers project as parallel planes onto the seafloor, creating profiles of the local topography that are interpreted from the digital camera image. The goal of the calibration was to determine the plane equations for the six lasers relative to the camera. This was accomplished in two stages. First, distortions in the digital image were corrected using an interpolation method based on a virtual pinhole camera model. Then, the laser planes were determined according to their intersections with a calibration target. The position and orientation of the target were obtained by a registration process. The selection of the target shape and size was found to be critical to a successful calibration at sea, due to the limitations in the manoeuvrability of the ROV.

• Journal of the Korean Society of Systems Engineering
• /
• v.20 no.spc1
• /
• pp.90-96
• /
• 2024

In this paper, we propose a technique to model high resolution seafloor topography with 1m intervals using actual water depth data near the east coast of the Korea with 1.6km distance intervals. Using a feature point extraction algorithm that harris corner based on deep learning, the location of the center of seafloor mountain was calculated and the surrounding topology was modeled. The modeled high-resolution seafloor topography based on deep learning was verified within 1.1m mean error between the actual warder dept data. And average error that result of calculating based on deep learning was reduced by 54.4% compared to the case that deep learning was not applied. The proposed algorithm is expected to generate high resolution underwater topology for the entire Korean peninsula and be used to establish a path plan for autonomous navigation of underwater vehicle.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.4
• /
• pp.343-349
• /
• 2011

Seabed topography and marine site survey should be performed first in the design and construction of marine structures. We could successfully acquire the seafloor topography information can be obtained by bathymetric survey and side scan sonar and the sediment layer thickness and 3D bedrock depth by seismic reflection. It is necessary to apply carry out the integrated interpretation to each other in the ocean civil Eng. In this paper, we have obtained information on the sea bottom topography and water depth at the same time using interferometer technique and on the basement depth by seismic reflection. We have performed to assess the proposed method on the seafloor topographic survey with bedrock.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.2
• /
• pp.104-110
• /
• 2006

The 3D visualization of seafloor topography(ST) was realized to discuss the effective use by the 3D visualization of ST on the integrated navigation system(INS) for fishing boat. The software was to actually display the 3D visualization of ST using triangular irregular network, helical hyperspatial codes and stereo projection. The INS for fishing boat which applied the 3D visualization of ST will be utilized for safety voyage and the effective fishing work on the fishing ground.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.7
• /
• pp.863-868
• /
• 2016

In this study, the precise shapes of sunken ships and information on seafloor topography were analyzed using data obtained from a multi-beam echo sounder. The state of each sunken ship was analyzed by processing diverse imagery data which was compared with data obtained from past investigations to determine changes in the state and circumjacent seafloor topography. Apparent changes in the seafloor topography around one sunken ship, the "Pacific Friend", were found from stern to bow as a result of continued submarine erosion and sedimentation. In the case of sunken ship "No. 7 Haeseong", the partial collapse of the bow was revealed in the seabed images captured in 2015, though it had still been intact in images captured during the Korea Hydrographic and Oceanographic Agency's investigation in 2011. This partial collapse was presumed to have resulted from the effects of continued tidal currents, the cargo load of the ship and continued corrosion of the ship over a long time on the seabed. Continuous monitoring of residual fuel inside the ship is necessary to avoid leakage and potential marine pollution. By conducting image analysis on these sunken ships, it has been determined that the structural safety of the ships is seriously influenced by tidal currents and seafloor topography, while the hulls will be continuously changed by corrosion. As a result, it can be concluded that the development of prediction and response techniques that take into consideration residual fuel leakage and environmental changes according to the geological characteristics of sunken ships is necessary.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.3
• /
• pp.165-173
• /
• 2009

The physical properties of a seafloor sediment have been used as a basic data for the ocean survey. Conventional methods such as a coring, a drilling, and a grabbing have been used to explore the physical properties but these methods have a number of shortcomings as it is time consuming, expensive and spatially limited. To overcome these limitations, seafloor sediment classification using acoustic signals has been studied actively. In this paper, we obtained the backscattered signal from the seafloor sediment using an echo sounder which is one kind of seafloor topography equipment. Nakagami probability density function of the backscattered signals from the seafloor sediment was computed and a Nakagami parameter was compared with the physical properties of the seafloor sediment. We have confirmed that Nakagami parameter, m is correlated with the physical properties of a seafloor sediment. This study will be utilized as a basic data of the seafloor sediment research.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.199-200
• /
• 2006

This paper describes how to generate stereoscopic sonar images by using multibeam data. Both parallel and crossing methods were used to create stereoscopic vision of the seafloor. Stereoscopic sonar images might provide reality and more detailed information of the target and the seafloor topography.