• Journal of the Korean Society of School Health
• /
• v.9 no.2
• /
• pp.161-170
• /
• 1996

This research was performed to screen eye health status for pre-school children (4~5 age) and establish as eye health checking system m community health center. This data was collected from 1st February, 1995 to 31st October, 1995. To screen the state of their vision, the Developed Visuual Test (D.V.T) was used for pre-school children. This is used at home by their parents and then it is also used among the kindergarten health team at Jung-gu health center in Seoul. This was done with the and of Randot and Han Choun Souk tests. The total number of children who were tested was 1441. Among the children, children aged 5 were 707, and those aged 4 were 734. The results of this study were as follows; * Description of the health status for the pre-school children. 1. The rate of children average vision in both eyes, whose was below 05 by Han Choun Souk are 7.6% (age 4) and 4.8% (age 5). 2. Only 20 4% (age 5) and 30 8% (age 4) of the pre-school children had been tested through the ophthalmic department. 3. The children with a level below 05 (Han Choun Souk test) had been tested only 43% (age 4), and 12% (age 5) 4. There was no particular difficulty in understanding the D.Y.T: 13.9% (age 4), 11.6% (age 5) of the tested children had eye problems. 5. 231 cases were trichiasis, entropin, strabismus, and amblyopia. * The different visual tests. The results of the visual tests between the two groups (parents and health teams) are similar and it shows that parents can easily test at home. * Delivery system of the D.V.T questionnaire The way children's parents received the D.V.T questionnaire were carried out by two ways By mall from the community health center. Send through the institution, for example the kindergarten school The receipt rate of this D.V.T questionnaire sent through the institution was higher than sent by mall.

• Journal of Animal Environmental Science
• /
• v.20 no.1
• /
• pp.1-8
• /
• 2014

The study on design criteria of solid-liquid separator for dairy farms was done by testing various screens, presses, and RPMs of screw auger with remodeled screw-press type pig-manure separator. The moisture content of separated solid increase from 68.3% to 74.2% as auger rotating speed increased from 9.8 to 29.2 RPM at 34.8 kPa of pressure and 1.0 mm of slit wedge wire screen condition. The moisture contents of separated solid were 72~77%, work efficiencies were 16~18 kg/min at 1.0 mm of slit wedge wire screen. The efficiency was higher than one at 0.5 mm of slit wedge wire screen, which was used to separate for pig manure. The best work efficiency was 18 kg/min at 42.5 kPa, 1.0 mm slit screen. The separated solid moisture content was 75% at this condition.

• The Journal of Korean Association of Computer Education
• /
• v.20 no.6
• /
• pp.1-15
• /
• 2017

The purpose of this study is to design a LMS(Learning Management System) dashboard for instructor feedback support based on learning analytics and to apply a LMS dashboard incorporating such taxonomy which allows an instructor to give a student personalized feedback according to the class content and a student's traits. In the dashboard design phase, usable instructional data were selected from LMS based on feedback taxonomy in terms of learning analytics. Two validity tests were conducted with 8 instructional technologists over 8 years of experience, and were revised accordingly. The final dashboard screen has three parts: A comprehensive analysis screen to provide appropriate feedback based on instructor feedback taxonomy analysis, a summary screen for learner analysis, and a recommended feedback guide screen. Detailed analysis information are provided through other dashboards that are displayed in eight screens: login analysis, learning information confirmation analysis, teaching materials learning analysis, assignment/tests, and posts analysis. All of these dashboards were represented by analysis information and data based on learner analytics through visualization methods including graphs and tables. The implications of educational utilization of the dashboard for instructor feedback support based on learning analytics and the future researches were suggested based on these results.

• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.72-85
• /
• 1983

Rice whitening is performed by basically two different whitening actions known as abrasive and frictional. The former adopted in the emery stone abrasive type whiteners and the latter in the jet-air friction type. Comparative milling yields and whitening efficiencies between the whitening system consisting of jet-air friction type whiteners only and the system consisting of both abrasive- and jet-air friction-types have not yet been rigorously defined. This study was to examine the effect of combined operations of abrasive- and jet-air friction-type rice whiteners on milling yields and whitening efficiencies. The small capacity commercial units of the abrasive- and friction-type whiteners were used for the experiments. The combinations of whitening treatments were: 1) Once in the abrasive type and then two to three times in the friction type, 2) twice in the abrasive and then two to three times in the friction type and 3) three to five times in friction type. In these tests, counter pressures for the friction type whiteners were established differently as required to get about the same degree of whitening at the end of predetermined numbers of the repeated operations. The speed of emery stone and the slot angle of the screen were also the factors varied in the abrasive type whitener. Sheukwang rice variety having 13.05% M.C. was used in the tests. The dependent variables were the milled- and head-rice recoveries and electricity consumption. The results of the study are summarized as follows: 1. It was found that in the whitening systems consisting of abrasive- and friction-type whiteners slot angle of the screen, the rotational speed of emery stone roller had significant effect on the milling yields and whitening efficiency. In general, the increase of the emery stone roller speed from 690 to 950 rpm presented a positive effect on milling yield, and one-pass abrasive milling combinations had higher milling yields than two-pass abrasive milling combinations. 2. It was apparent that if the slot angle of the screen and the speed of emery stone roller are modified and set at an optimum level, the combination whitening system consisting of abrasive- and friction-type whiteners is better than the pure frictional whitening system consisting of jet-air friction type in terms of milling yields and efficiencies. 3. In the rice whitening system consisting of abrasive- and jet-air friction-type whiteners, the best whitening performance was obtained when the slot angle of the screen and the rotational speed of emery stone roller were $45^{\circ}$ and 950rpm, respectively, for the one-pass abrasive milling combinations. However, for the two-pass abrasive mi11ing combinations, the best performance was obtained with $75^{\circ}$ of slot angle and 950 rpm of the emery stone roller speed. 4. As compared with pure frictional whitening systems, the combination systems produced more milled rice by 0.8-1.0% point and more head rice by 0.5-1.5% point, and consumed less electricity by 0.15-0.20 KwH per 100kg of milled rice when the abrasive whiteners were operated in the modified conditions as described in item 3 above. Further study is recommended to find out optimum operational and design conditions of abrasive type whiterners.

• Natural Product Sciences
• /
• v.9 no.4
• /
• pp.260-263
• /
• 2003

Ethanol extract of the root of Clitoria ternatea Linn (CTEE) was evaluated for different neuropharmacological actions, such as general behaviour, exploratory behaviour, muscle relaxant activity and phenobarbitone induced sleeping time, in rats and mice. The extract was found to cause reduction in spontaneous activity, decrease in exploratory behavioural pattern by the head dip and Y- maze test, reduction in the muscle relaxant by rotarod, $30^{\circ}C$ inclined screen and traction tests. In addition CTEE significantly potentiated the phenobarbitone-induced sleeping time. Preliminary tests indicate that the ethanol extract of Clitoria ternatea Linn. At the doses of 100 and 150 mg/kg showed significant neuropharmacological activity.

• The Korean Journal of Ceramics
• /
• v.4 no.3
• /
• pp.176-182
• /
• 1998

The effects of temperature, cooling surface tension on the fining were studied in alkali-alkaline earth-silica TV screen glassmelts containing ZnO. Sodium antimonate $(Na_2OSb_2O_5)$ was used as a fining agent. Viscosity and surface tension of the melts were determined. On the basis of these properties, fining tests for several batches were performed by "MF" (Melting and Fining) and "PMF" (Profiled melting and Fining) methods. The results of these tests showed an opposite behavior each other with increase in ZnO content. This hehavior has been discussed in terms of two fining processes-growth of bubbles and shrinkage of seeds. shrinkage of seeds.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.2
• /
• pp.42-45
• /
• 1996

A residue from the newsprint waste was investigated as a filler in adhesive for bonding southern pine plywood. The residue was prepared by drying the wet residue to 8% moisture content and grinding the dry material using a laboratory Wiley mitt with a 75-${\mu}m$(200-mesh) screen. The residue was compared to a commercial filler commonly used in structural plywood adhesives. A total of 48 three-ply panels. 12.7mm nominal thickness and 0.3 by 0.3 m in size, were fabricated at two press times(4 and 5 min) and three assembly times(20, 40 and 60 min). Evaluations of the residue were carried out by performance tension shear tests after two 4-hour boil accelerated aging tests on plywood. The test results included tension shear strength and estimated wood failure values. All plywood made with the residue filler were comparable to the control-bonded plywood. These results indicate that residue from the newsprint waste streams would be suitable as filler for plywood adhesives.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05c
• /
• pp.10-14
• /
• 2001

In order to assess the long-tenn reliability of polymer insulators for distribution power systems, we have developed the accelerated aging test method which can simulate the operation conditions. In this study, 3000 hours aging test for 4 kinds of polymer insulators has been completed by the developed accelerated aging test. After 3000 hours aging test, visual inspection and electrical tests were carried for identifying a change of characteristics. Some specimens showed the surface erosion and the manufacturing defect. In the electrical tests, the wet flashover voltage was significant1y decreased by the accelerated aging test. In comparison with the field-aged polymer insulators, it can be concluded that the developed test method can evaluate the long-tenn reliability within short time and screen the manufacturing defect.

• Therapeutic Science for Rehabilitation
• /
• v.7 no.4
• /
• pp.31-41
• /
• 2018

Objective: This study was to develop computerized screening test items for mild cognitive impairment. Methods: Through literature reviews, items from computerized tests for screening mild cognitive impairment were extracted. A panel of professional experts validated that the items were important and fit to screen for mild cognitive impairment. Results: A total 37 items were extracted from 12 computerized tests and 11 new items were added through the first panel review. After that, 18 items were removed via the second panel review. Finally, 16 items were selected by analyzing content validity ratio. 16 items consisted of memory, attention, and executive function areas. Conclusions: A total of 16 computerized test items were developed. It is urgent to validate them to screen mild cognitive impairment. Moreover, standardization studies for this test are required in the future.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.12
• /
• pp.1093-1098
• /
• 2012

Commercial Off the Shelf(COTS) Integrated circuits(ICs) are being increasingly considered for use in space and military applications. Therefore, There is a need to implement standard tests and requirements to ensure reliability of COTS ICs. This paper presents an overview of the ICs screen procedure and methods under the European Cooperation for Space Standardization (ECSS) and Tests Method Standard Microcircuits (MIL-STD-883). We describes the COTS ICs screen test guidelines that are mainly focused after encapsulating. In addition, COTS linear bipolar IC is investigated to evaluate the reliability requirements. The experiment results showed that COTS IC is satisfied with high reliability requirements.