• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1305-1307
• /
• 2007

We show that the electrical properties of organic thinfilm transistors(OTFTs) can be enhanced by controlling the morphology of interface between screen printed electrodes and gate dielectrics. Modified surface of the insulator layer($SiO_2$) affect on the interface energy of electrode on $SiO_2$ layer. Contact angle measurement and FT-IR spectrum shows that the interface is properly modified. OTFTs device with high efficiency has been realized through modification of interface layer.

• 한국전기전자재료학회논문지
• /
• 제20권5호
• /
• pp.456-461
• /
• 2007

In this study, a surface treatment method using accelerated Ar ions was experimented for exposing the carbon nanotubes (CNT) from the screen-printed CNT paste. After making a cathode electrode on the glass substrate, photo sensitive CNT paste was screen-printed, and then back-side was exposed by UV light. Then, the exposed CNT paste was selectively remained by development. After post-baking, the remained CNT paste was bombarded by accelerated Ar ions for removing some binders and exposing only CNTs. As results, the field emission characteristics were strongly depended on the accelerating energy, bombardment time, and the power of RF plasma ion source. When Ar ions accelerated with 100 eV energy from the 100 W RF plasma source are bombarded on the CNT paste surface for 10 min, the emission level and the uniformity were best.

• 분석과학
• /
• 제12권3호
• /
• pp.218-223
• /
• 1999

스크린 프린팅 기술을 이용하여 일회용 에탄올 센서를 개발하고 전기화학적 방법으로 그 성능을 조사하였다. 일회용 에탄올 센서는 폴리에스테르 기질 위에 탄소와 은 반죽 그리고 절연체 잉크로 작업 및 기준전극의 감응부위와 전기적 접촉부위의 형상을 차례로 인쇄한 후 알코올탈수소효소(ADH) 또는 알코올산화효소(AOD)를 알려진 전자전달 매개체(mediator)와 함께 작업전극에 고정시켜 제작하였다. 일회용 센서의 제작 과정에서 감응도와 재현성을 높이기 위하여 프린팅한 탄소 작업전극을 전처리 하는 몇 가지 방법들을 적용하고 그 결과들을 비교하였다. 제작된 일회용 센서는 소량의 혈액시료로 음주측정을 하는데, 그리고 발효공정 제어 등에 유용하게 사용될 수 있다.

• 공업화학
• /
• 제34권5호
• /
• pp.493-500
• /
• 2023

본 연구에서는 스크린 프린팅 공정을 통해 탄소 잉크 기반의 2상 전극을 제작하고, 전극 표면에 이리듐 산화물(IrO_x)을 코팅함으로써 전극의 분극 현상을 제어할 수 있는 임피던스 센서를 개발하였다. IrO_x는 순환 전압 전류법으로 탄소 전극의 표면 위에 순환 수(0~50 cycles)에 따라서 코팅되었다. 전자주사현미경을 이용하여 cycle 수가 증가할수록 IrO_x 입자의 크기와 수가 증가하는 경향성을 확인하였다. 전기화학 임피던스 분석을 이용하여 상기 제조된 센서들의 NaCl 농도에 따른 임피던스 변화 값을 조사하였다. 50 cycle에서 제조된 센서가 가장 우수한 결정계수와 재현성을 나타내었으며, 이는 분극 현상이 잘 제어되었기 때문이다. 실제 용액 샘플들을 이용한 삼투압 장비와 비교 측정 실험을 수행함으로써 IrO_x 기반 센서의 안구건조증 진단 센서로의 활용가치를 증명하였다.

• 한국분말재료학회지
• /
• 제18권5호
• /
• pp.423-429
• /
• 2011

Thermoelectric-thick films were fabricated by using a screen printing process of n and p-type bismuth-telluride-based pastes. The screen-printed thick films have approximately 30 ${\mu}m$ in thickness and show rough surfaces yielding an empty gap between an electrode and the thick film. The gap might result in an increase of an electrical resistivity of the fabricated thick-film-type thermoelectric module. In this study, we suggest a conductive metal coating onto the surfaces of the screen-printed paste in order to reduce the contact resistance in the module. As a result, the electrical resistivity of the thermoelectric module having a gold coating layer was significantly reduced up to 30% compared to that of a module without any metal coating. This result indicates that an introduction of conductive metal layers is effective to decrease the contact resistivity of a thick-film-typed thermoelectric module processed by screen printing.

• Journal of Electrochemical Science and Technology
• /
• 제14권1호
• /
• pp.1-14
• /
• 2023

The overuse of pesticides in agricultural sectors exposes people to food contamination. Pesticides are toxic to humans and can have both acute and chronic health effects. To protect food consumers from the adverse effects of pesticides, a rapid monitoring system of the residues is in dire need. Molecularly imprinted polymer (MIP) on a screen-printed electrode (SPE) is a leading and promising electrochemical sensing approach for the detection of several residues including pesticides. Despite the huge development in analytical instrumentation developed for contaminant detection in recent years such as HPLC and GC/MS, these conventional techniques are time-consuming and labor-intensive. Additionally, the imprinted SPE detection system offers a simple portable setup where all electrodes are integrated into a single strip, and a more affordable approach compared to MIP attached to traditional rod electrodes. Recently, numerous reviews have been published on the production and sensing applications of MIPs however, the research field lacks reviews on the use of MIPs on electrochemical sensors utilizing the SPE technology. This paper presents a distinguished overview of the MIP technique used on bare and modified SPEs for the detection of pesticides from four recent publications which are malathion, chlorpyrifos, paraoxon and cyhexatin. Different molecular imprint routes were used to prepare these biomimetic sensors including solution polymerization, thermal polymerization, and electropolymerization. The unique characteristics of each MIP-modified SPE are discussed and the comparison among the findings of the papers is critically reviewed.

• Current Photovoltaic Research
• /
• 제10권3호
• /
• pp.90-94
• /
• 2022

The screen-printing method is the most mature solar cell fabrication technology, which has the advantage of being faster and simpler process than other printing technology. A front metallization printed through screen printing influences the efficiency and manufacturing cost of solar cell. Recent technology development of crystalline silicon solar cell is proceeding to reduce the manufacturing cost while improving the efficiency. Therefore, screen printing requires process development to reduce a line width of an electrode and decrease shading area. In this paper, we will discuss the development trend and prospects of screen-printing metallization using metal paste, which is currently used in manufacturing commercial crystalline silicon solar cells.

• Journal of Electrochemical Science and Technology
• /
• 제11권3호
• /
• pp.310-317
• /
• 2020

A development of disposable strip-type galactose sensor for point-of-care testing (POCT) was studied, which was constructed using screen-printed carbon electrodes. Galactose levels were determined by the redox reaction of galactose oxidase in the presence of potassium ferricyanide as an electron transfer mediator in a small sample volume (i.e., less than 1 µL). The optimal performance of biosensor was systematically designated by varying applied potential, operating pH, mediator concentration, and amount of enzyme on the electrode. The sensor system was identified as a highly active for the galactose measurement in terms of the sensitivity (slope = 4.76 ± 0.05 nA/µM) with high sensor-to-sensor reproducibility, the linearity (R² = 0.9915 in galactose concentration range from 0 to 400 µM), and response time (t_95% = <17 s). A lower applied potential (i.e., 0.25 V vs. Ag/AgCl) allowed to minimize interference from readily oxidizable metabolites such as ascorbic acid, acetaminophen, uric acid, and acetoacetic acid. The proposed galactose sensor represents a promising system with advantage for use in POCT.

• 센서학회지
• /
• 제32권6호
• /
• pp.412-417
• /
• 2023

There is increasing interest in the rapid and highly sensitive monitoring of cell viability in biological and toxicological research. Conventional methods depend on optical assays using Water Soluble Tetrazolium-8 (WST-8) or 3-(4,5-dimethylthiazolyl-2)-2,5-diphenyltetrazolium bromide (MTT) assay, which requires a large volume of samples and special instruments, necessitating shipment of clinical samples to laboratories. This paper reports on the development of a rapid and sensitive electrochemical (EC) sensor using screen printed electrode (SPE) and surface modification using 4'-mercapto-N-phenylquinone diamine (4'-NPQD), as double electron mediators, for monitoring cell viability via the measurement of nicotinamide adenine dinucleotide (NADH). We used the sensor to observe the viability of MCF-7 and doxorubicin (Dox)-treated cells. The oxidation current of NADH was measured via chronoamperometry (CA), and the EC results showed a good linear relationship when compared with NADH quantification using WST-8 assay. The analysis time was only 10 s and limit of detection (LOD) of NADH was 1.78 µM. Our EC method has the potential to replace conventional WST assays for cell viability and cytotoxicity experiments.

• 공업화학
• /
• 제32권4호
• /
• pp.461-466
• /
• 2021

본 논문에서는 이동성이 좋고 경제적이며, 간편하게 일회용 진단칩으로 제작 가능한 스크린 프린팅 한 탄소칩 전극[screen printed carbon electrode (SPCE)] 기반의 전압전류법 나노물질 융합형 바이오센서를 제작하여 폐암 조기진단에 활용 가능한 단백질 표지 인자 중에 하나인 heterogeneous nuclear ribonucleoprotein A1 (hnRNP A1) 단백질의 농도를 정량 분석하고자 하였다. 먼저 SPCE 표면에 금 나노입자를 전기적으로 증착한 후 크로스링커를 이용하여 hnRNP A1에 특이적으로 결합할 수 있는 바이오리셉터인 DNA 압타머를 고정하였다. Ethanolamine을 블로킹 시약으로 사용하여 압타머와 함께 센서 표면에 고정하여 그 표면을 처리함으로써 비특이적인 생물질의 흡착에 의한 방해 신호를 최소화하고자 하였다. DNA칩과 hnRNP A1 용액을 접촉하여 DNA와 hnRNP A1을 결합시킨 후 alkaline phosphatase (ALP) 효소로 접합한 hnRNP A1 항체(anti-hnRNP A1)을 센서칩 표면으로 주입하여 샌드위치 복합체를 형성하고, 이를 기질인 4-aminophenyl phosphate (APP)와 효소-기질 특이적 산화 반응에 의한 전류 변화를 순환 전압전류법과 시차 펄스전압전류법으로 측정하여 단백질의 농도를 정량적으로 분석하였다. 상기 산화 반응에 의한 피크 전류 변화는 순환전압전류법과 시차 펄스 전압전류법을 사용할 때 -0.05와 -0.17 V (vs. Ag/AgCl) 전위 값에서 각각 일어났다. 개발한 나노바이오센서를 실제 정상인 혈청 시료 분석에 적용 가능함을 보여줌으로써 혈청 한 방울로 폐암의 조기진단 가능성을 제시하고자 하였다.