• Title/Summary/Keyword: scheme

Search Result 29,257, Processing Time 0.059 seconds

Analysis of Modality and Procedures for CCS as CDM Project and Its Countmeasures (CCS 기술의 CDM 사업화 수용에 대한 방식과 절차 분석 및 대응방안 고찰)

  • Noh, Hyon-Jeong;Huh, Cheol;Kang, Seong-Gil
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.15 no.3
    • /
    • pp.263-272
    • /
    • 2012
  • Carbon dioxide, emitted by human activities since the industrial revolution, is regarded as a major contributor of global warming. There are many efforts to mitigate climate change, and carbon dioxide capture and geological storage (CCS) is recognized as one of key technologies because it can reduce carbon dioxide emissions from large point sources such as a power station or other industrial installation. The inclusion of CCS as clean development mechanism (CDM) project activities has been considered at UNFCCC as financial incentive mechanisms for those developing countries that may wish to deploy the CCS. Although the Conference of the Parties serving as the Meeting of the Parties to the UNFCCC's Kyoto Protocol (CMP), at Cancun in December 2010, decided that CCS is eligible as CDM project activities, the issues identified in decision 2/CMP.5 should be addressed and resolved in a satisfactory manner. Major issues regarding modalities and procedure are 1) Site selection, 2) Monitoring, 3) Modeling, 4) Boundaries, 5) Seepage Measuring and Accounting, 6) Trans-Boundary Effects, 7) Accounting of Associated Project Emissions (Leakage), 8) Risk and Safety Assessment, and 9) Liability Under the CDM Scheme. The CMP, by its decision 7/CMP.6, invited Parties to submit their views to the secretariat of Subsidiary Body for Scientific and Technological Advice (SBSTA), SBSTA prepared a draft modalities and procedure by exchanging views of Parties through workshop held in Abu Dhabi, UAE (September 2011). The 7th CMP (Durban, December 2011) finally adopted the modalities and procedures for CCS as CDM project activities (CMP[2011], Decision-/CMP.7). The inclusion of CCS as CDM project activities means that CCS is officially accredited as one of $CO_2$ reducing technologies in global carbon market. Consequently, it will affect relevant technologies and industry as well as law and policy in Korea and aboard countries. This paper presents a progress made on discussion and challenges regarding the issue, and aims to suggest some considerations to policy makers in Korea in order to demonstrate and deploy the CCS project in the near future. According to the adopted modalities and procedures for CCS as CDM project activities, it is possible to implement relevant CCS projects in Non-Annex I countries, including Korea, as long as legal and regulatory frameworks are established. Though Korea enacted 'Framework Act on Low Carbon, Green Growth', the details are too inadequate to content the requirements of modalities and procedures for CCS as CDM project. Therefore, it is required not only to amend the existing laws related with capture, transport, and storage of $CO_2$ for paving the way of an prompt deployment of CCS CDM activities in Korea as a short-term approach, but also to establish the united framework as a long-term approach.

Development of Multimedia Annotation and Retrieval System using MPEG-7 based Semantic Metadata Model (MPEG-7 기반 의미적 메타데이터 모델을 이용한 멀티미디어 주석 및 검색 시스템의 개발)

  • An, Hyoung-Geun;Koh, Jae-Jin
    • The KIPS Transactions:PartD
    • /
    • v.14D no.6
    • /
    • pp.573-584
    • /
    • 2007
  • As multimedia information recently increases fast, various types of retrieval of multimedia data are becoming issues of great importance. For the efficient multimedia data processing, semantics based retrieval techniques are required that can extract the meaning contents of multimedia data. Existing retrieval methods of multimedia data are annotation-based retrieval, feature-based retrieval and annotation and feature integration based retrieval. These systems take annotator a lot of efforts and time and we should perform complicated calculation for feature extraction. In addition. created data have shortcomings that we should go through static search that do not change. Also, user-friendly and semantic searching techniques are not supported. This paper proposes to develop S-MARS(Semantic Metadata-based Multimedia Annotation and Retrieval System) which can represent and extract multimedia data efficiently using MPEG-7. The system provides a graphical user interface for annotating, searching, and browsing multimedia data. It is implemented on the basis of the semantic metadata model to represent multimedia information. The semantic metadata about multimedia data is organized on the basis of multimedia description schema using XML schema that basically comply with the MPEG-7 standard. In conclusion. the proposed scheme can be easily implemented on any multimedia platforms supporting XML technology. It can be utilized to enable efficient semantic metadata sharing between systems, and it will contribute to improving the retrieval correctness and the user's satisfaction on embedding based multimedia retrieval algorithm method.

An Evaluation of the Private Security Industry Regulations in Queensland : A Critique (호주 민간시큐리티 산업의 비판적 고찰 : 퀸즐랜드주를 중심으로)

  • Kim, Dae-Woon;Jung, Yook-Sang
    • Korean Security Journal
    • /
    • no.44
    • /
    • pp.7-35
    • /
    • 2015
  • The objective of this article is to inform and document the contemporary development of the private security industry in Queensland Australia, a premier holiday destination that provide entertainment for the larger region. The purpose of this review is to examine the comtemporary development of mandated licensing regimes regulating the industry, and the necessary reform agenda. The overall aim is threefold: first, to chart the main outcomes of the two-wave of reforms since the mid-'90s; second, to examine the effectiveness of changes in modes of regulation; and third, to identify the criteria that can be considered a best practice based on Button(2012) and Prenzler and Sarre's(2014) criteria. The survey of the Queensland regulatory regime has demonstrated that, despite the federal-guided reforms, there remain key areas where further initiatives remain pending, markedly case-by-case utilisation of more proactive strategies such as on-site alcohol/drug testing, psychological evaluations, and checks on close associates; lack of binding training arrangement for technical services providers; and targeted auditing of licensed premises and the vicinity of venues by the Office of Fair Trading, a licensing authority. The study has highlighted the need for more determined responses and active engagements in these priority areas. This study of the development of the licensing regimes in Queensland Australia provides useful insights for other jurisdictions including South Korea on how to better manage licensing system, including the measures required to assure an adequate level of professional competence in the industry. It should be noted that implementing a consistency in delivery mode and assessment in training was the strategic imperative for the Australian authority to intervene in the industry as part of stimulating police-private partnerships. Of particular note, competency elements have conventionally been given a low priority in South Korea, as exemplified through the lack of government-sponsored certificate; this is an area South Korean policymakers must assume an active role in implementing accredited scheme, via consulting transnational templates, including Australian qualifications framework.

  • PDF

Economic Feasibility of Hill Land Development (산지개발(山地開發)의 경제성)

  • Kim, Dong-Min
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.11 no.4
    • /
    • pp.283-295
    • /
    • 1979
  • A new Farmland Expansion and Development Promotion Law was enacted in 1975. This law authorizes the Government to undertake development within a declared "reclamation area", wherever the land owners are unable to do so. In order to give additional impetus to conversion of waste hilly land into productive farmland, these hilly land development projects were conducted as large scale scheme which include soil fertility improvements such as the application of lime and phosphate. Farmland Expansion and Development Promotion Corps has attempted to undertake annual farm surveys in order to obtain some information about hilly land agriculture and farming operations within the reclamation project areas since 1976. As survey data accumulates, more and more clear picture of hilly land farming come to appear and enable us to conduct in-depth study. Effects of such upland reclamation include converting of previously unproductive slopeland into cultivable farmland for lucrative and commercial farming or food production. Furthermore, idle or marginal resources such as farm labor, equipment and compost would be fully employed. Socio-economic effects would include increases in land value and attitude change of farmers. On the other hand the preservation of natural environments might be damaged to the some extend by the projects. As shown in Table 7, the average farm size increased from 3,156 pyeong($3.3m^2$) to 5,562 pyeong, a 76.2% increase. The proportion of small farms with less than I ha dropped from 59.8% to 34.4%, but that of the large farms over 2 ha rose from 13.1% to 32.0% (See Table 8). The survey results indicate that as the farming on reclaimed uplands become time-honored, the acreage devoted for food crop production decreases against the economic crop growing acreage (see Table 6). For example, in the case of uplands reclaimed in 1972, the ratio of food crop acreages decreased from 99.7% in 1972 to 62.5% in 1977, whereas that of economic crop acreages increased from 0.3% in 1972 to 37.5% in 1977. The government used to actively encourage the farmers to carry out food crop production in the reclaimed upland targting toward the realization of self-sufficiency in food grains. It is, however, apparent that the farmers did hardly take the government advises as far as their economic interest were concerned. Yield per 10a. of various crops from the reclaimed uplands by year were surveyed as seen in Table 12. On the average, barley production in the reclaimed areas achieved 83.3% of the average unit yield from the existing upland in its 5 th year. Soybean yields showed a modest increase from 64% in the first year to 95%, in the 5 th year. In contrast, economic crops such as red pepper, totacco and radish achieved their maximum target yields in 3 years from starting to cultivate on the reclaimed farms. In order to test the post economic viability, an economic analysis was performed for each of selected subprojects on the basis of the data obtained through survey. The average actual internal economic rate of return on upland reclamation investments was found to be 20.3% which exceeded other types of projects of land and water development such as tidal land reclamation, irrigation or paddy rearrangement. The actual IRRs of subcategories of upland reclamation projects varied from 17.9% to 21.4% depending upon the kinds of cropping system adopted in each reclaimed areas such as food, economic, fruit or forage crops.

  • PDF

Switching and Leakage-Power Suppressed SRAM for Leakage-Dominant Deep-Submicron CMOS Technologies (초미세 CMOS 공정에서의 스위칭 및 누설전력 억제 SRAM 설계)

  • Choi Hoon-Dae;Min Kyeong-Sik
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.43 no.3 s.345
    • /
    • pp.21-32
    • /
    • 2006
  • A new SRAM circuit with row-by-row activation and low-swing write schemes is proposed to reduce switching power of active cells as well as leakage one of sleep cells in this paper. By driving source line of sleep cells by $V_{SSH}$ which is higher than $V_{SS}$, the leakage current can be reduced to 1/100 due to the cooperation of the reverse body-bias. Drain Induced Barrier Lowering (DIBL), and negative $V_{GS}$ effects. Moreover, the bit line leakage which may introduce a fault during the read operation can be eliminated in this new SRAM. Swing voltage on highly capacitive bit lines is reduced to $V_{DD}-to-V_{SSH}$ from the conventional $V_{DD}-to-V_{SS}$ during the write operation, greatly saving the bit line switching power. Combining the row-by-row activation scheme with the low-swing write does not require the additional area penalty. By the SPICE simulation with the Berkeley Predictive Technology Modes, 93% of leakage power and 43% of switching one are estimated to be saved in future leakage-dominant 70-un process. A test chip has been fabricated using $0.35-{\mu}m$ CMOS process to verify the effectiveness and feasibility of the new SRAM, where the switching power is measured to be 30% less than the conventional SRAM when the I/O bit width is only 8. The stored data is confirmed to be retained without loss until the retention voltage is reduced to 1.1V which is mainly due to the metal shield. The switching power will be expected to be more significant with increasing the I/O bit width.

Planting Evaluations for the Landscaping Tree and Application Plan by Assessment Grade in the City Park - A Case Study of Haedoji Park, Songdo, Incheon Metropolitan City - (도시공원 조경수목 식재 평가 및 평가등급 적용 방안 - 인천광역시 송도 해돋이공원을 대상으로 -)

  • Han, Bong-Ho;Cho, Hun-Gum;Kwak, Jeong-In;Park, Seok-Cheol
    • Korean Journal of Environment and Ecology
    • /
    • v.28 no.4
    • /
    • pp.457-471
    • /
    • 2014
  • This study aims to present an evaluation scheme to improve the problems in tree shapes and tree growth which were identified through shape and growth assessments of landscape trees currently planted in Haedoji Park, Songdo, Incheon Metropolitan City after plant structure status and propriety review for funtion of space and concept of planting. Suitability the planting concept was evaluated according to function of space. The result indicated that the shade planting areas accounted for 29.5% of the the shade spaces area. 58.7%, respectively planting areas of visual landscape. And 11.8%, respectively planting areas of buffer. Because the planting areas was lacked according to the park established spatial configuration of central facilities and the result of plant young trees. Plant structure status required consideration with plant structure, density, size, growth status for improve planting function. The tree assessment was performed on a total of 28 species and 600 trees of which 22 species and 209 trees were planted in the buffer zone, 8 species and 71 trees in the shade zone, 16 species and 266 trees in the visual landscape zone, and 4 species and 54 trees in the ecological landscape zone. The trees were divided into grades based on their assessment score and were statistically grouped by the functional zone in where they are planted and by tree species to verify their significance. The tree shape assessment was an average of 56.6 points and the tree growth assessment was an average of 76.0 points. Using the results of the tree assessments, the tree standards for each functional space were identified and a concept of optimum planting and cultivating was applied. When applying the shape assessment results by zone to the concept of planting, since trees for buffering require high functionality they received E's, the lowest grade; as trees for ecological landscaping require diverseness and naturalness, they received D's; since trees for shading require utilization, they received C's as trees with branching at the main stems were considered; and since trees for visual landscaping required aesthetical value, they received A's and B's. When applying the growth assessment results by zone to the concept of planting, based on planting foundations of favorable and poor, for buffering, visual landscaping, and ecological landscaping, trees from grades A to E could be planted, and for shading, trees from grades A to C could be planted. For a cultivation plan that could improve the growth of the trees, we proposed that the topography of the land be selected considering the tree's characteristics and that a method of pot seeding be used. Also, to improve the shape of the trees, we proposed that poles be used to improve the growth of vertically-straight stems, an appropriate planting density be applied for reasonable branch growth, manage tree shape to maintain good crowning, and better manage fertilization to maintain a reasonable crown density.

A Study on the Reflective Practice Experience of a Home Economics Teacher Professional Learning Community Operator (가정과 교사학습공동체 운영자의 성찰적 실천 경험에 관한 실행연구)

  • Lee, Gyeong Suk;Yoo, Taemyung
    • Journal of Korean Home Economics Education Association
    • /
    • v.29 no.2
    • /
    • pp.1-22
    • /
    • 2017
  • The purpose of this research is to share the experience of reflective practice of a Home Economics teacher professional learning community(PLC) operator and to share better suggestions through reflection on PLC operation. All conversation in the 18 sessions of the PLC totally from May 31st 2013 to May 19th 2014 was recorded and transcribed. All materials of PLC activity were qualitatively analysed. Its themes were grounded on its coding and categorization scheme. Findings and conclusions of this study are as followings. The experience of learning the PLC for a year has found that it is the power to keep the PLC alive: courage and anxiety to face anxiety and anxiety about new challenges, the importance of theme selection, a teacher with a reckless challenge, shares of becoming a leader. Through reflection, I learned that concerns require attention to other teachers and the need for a 'New Round' for ongoing meetings. I, as a operator, did not fully consider participant's different interest as well as a program for a new round due to the lack of management experience. It led to the low participations in latter sessions of PLC. Suggestions are put as solutions to improve these problems; (1) grouping participants by school levels when collecting participants, (2) setting operation period and program applying participants' opinions, and (3) operating short-term PLC with certain themes to immerse reaching goal and satisfaction in short time.

Channel Model and Wireless Link Performance Analysis for Short-Range Wireless Communication Applications in the Terahertz Frequency (테라헤르츠 대역 주파수에서 근거리 무선 통신 응용을 위한 채널 모델 및 무선 링크 성능 분석)

  • Chung, Tae-Jin
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.20 no.9
    • /
    • pp.868-882
    • /
    • 2009
  • In this paper, channel model and wireless link performance analysis for the short-range wireless communication system applications in the terahertz frequency which is currently interested in many countries will be described. In order to realize high data rates above 10 Gbps, the more wide bandwidths will be required than the currently available bandwidths of millimeter-wave frequencies, therefore, the carrier frequencies will be pushed to THz range to obtain larger bandwidths. From the THz atmospheric propagation characteristics based on ITU-R P.676-7, the available bandwidths were calculated to be 68, 48 and 45 GHz at the center frequencies of 220, 300 and 350 GHz, respectively. With these larger bandwidths, it was shown from the simulation that higher data rate above 10 Gbps can be achieved using lower order modulation schemes which have spectral efficiency of below 1. The indoor propagation delay spread characteristics were analyzed using a simplified PDP model with respect to building materials. The RMS delay spread was calculated to be 9.23 ns in a room size of $6\;m(L){\times}5\;m(W){\times}2.5\;m(H)$ for the concrete plaster with TE polarization, which is a similar result of below 10 ns from the Ray-Tracing simulation in the reference paper. The indoor wireless link performance analysis results showed that receiver sensitivity was $-56{\sim}-46\;dBm$ over bandwidth of $5{\sim}50\;GHz$ and antenna gain was calculated to be $26.6{\sim}31.6\;dBi$ at link distance of 10m under the BPSK modulation scheme. The maximum achievable data rates were estimated to be 30, 16 and 12 Gbps at the carrier frequencies of 220, 300 and 350 GHz, respectively, under the A WGN and LOS conditions, where it was assumed that the output power of the transmitter is -15 dBm and link distance of 1 m with BER of $10^{-12}$. If the output power of transmitter is increased, the more higher data rate can be achieved than the above results.

Influence of crestal module design on marginal bone stress around dental implant (임플란트 경부 디자인이 변연골 응력에 미치는 영향)

  • Lim, Jung-Yoel;Cho, Jin-Hyun;Jo, Kwang-Heon
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.48 no.3
    • /
    • pp.224-231
    • /
    • 2010
  • Purpose: This study was to investigate how the crestal module design could affect the level of marginal bone stress around dental implant. Materials and methods: A submerged implant of 4.1 mm in diameter and 10 mm in length was selected as baseline model (Dentis Co., Daegu,Korea).A total of 5 experimental implants of different crestal modules were designed (Type I model : with microthread at the cervical 3 mm, Type II model : the same thread pattern as Type I but with a trans-gingival module, Type III model: the same thread pattern as the control model but with a trans-gingival module, Type IV model: one piece system with concave transgingival part, Type V model: equipped with beveled platform). Stress analysis was conducted with the use of axisy mmetric finite element modeling scheme. A force of 100 N was applied at 30 degrees from the implant axis. Results: Stress analysis has shown no stress concentration around the marginal bone for the control model. As compared to the control model, the stress levels of 0.2 mm areas away from the recorded implant were slightly lower in Type I and Type IV models, but higher in Type II, Type III and Type V models. As compared to 15.09 MPa around for the control model, the stress levels were 14.78 MPa, 18.39 MPa, 21.11 MPa, 14.63 MPa, 17.88 MPa in the cases of Type I, II, III, IV and V models. Conclusion: From these results, the conclusion was drawn that the microthread and the concavity with either crestal or trans-gingival modules maybe used in standard size dental implants to reduce marginal bone stress.

A Comparative Study on the Recognition of Urban Agriculture between Urban Farmers and Public Officials (도시농업인과 공무원의 도시농업 인식 비교·평가)

  • Park, Won-Zei;Koo, Bon-Hak;Park, Mi-Ok;Kwon, Hyo-Jin
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.40 no.4
    • /
    • pp.90-103
    • /
    • 2012
  • The aim of this study is to be able to understand the problems within the urban agriculture policy promoted by the Government and local autonomous entity base on the comparison of the consciousness of the urban agriculture between urban farmers and public officials and to inquire into the further revitalization scheme in the end. For this purpose, this study drew implications through studying latest trend and the legislation of domestic and foreign urban agriculture and then conducted a questionnaire survey of urban farmers and public officials. Because of this research, the revitalization schemes of urban agriculture are as follows: First, it's necessary to secure the usable arable land, such as the green roof, community garden, as well as urban agriculture park, etc. Second, it is necessary to establish the urban agriculture relations act suited for the actual circumstances of our country and to back up the legislation at an institutional, technological level in terms of a nation in order to secure the durability of urban agriculture. Third, it is advisable to make a proposal about the problems in time of activities for cultivation by forming a network between urban farmers and public officials and to prepare the plan for the active exchange of farming technologies. Fourth, it's necessary to activate the community gardens by supplying the education through cultivation method & its management method, and a variety of urban-agriculture-participation programs. Fifth, it is necessary to set up the specialized and practical education through an institute for landscape architecture. Sixth, it is necessary to induce the spontaneous participation in urban agriculture from urban farmers accompanied by the activities for promotion that are worth arousing urban farmers' interest. Lastly, it is also necessary to establish a legal basis of urban agricultural parks and facilities as well as to promote a search for multilateral policies and their practice so that the further urban agriculture can be stably continued within city boundaries.