• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.65-67
• /
• 2013

The recent high-performance network equipment is required, and also require high network bandwidth utilization. It is a trend to develop increasingly using multi-core processors for high-performance network servers. Propose a method to improve the performance of the network sub-system, considering the characteristics of multi-core as a way to improve these high-performance and high network throughput. In this paper, we confirm through experiments on how to improve the communication performance, optimize performance and take full advantage of multi-core by Network communication process to improve the performance of the multi-core processor architecture, the process of concentration, the overhead for each core, based on network traffic according to the interrupt affinity in this process to determine the optimal core to give. The experiments were implemented in the Linux kernel, and experiments to improve the network throughput up to 30%, bringing reduces the Linux communication process to improve the performance of the processor overhead of up to 10%.

• Journal of KIISE:Information Networking
• /
• v.32 no.1
• /
• pp.68-79
• /
• 2005

The popularity of Web service is ever increasing. As the number of services and clients continue to increase, the problem of providing a system that scales with this increase is becoming more difficult. A costly and ineffective method is to buy a new system that is more powerful every time the load becomes unbearable. h more cost effective solution is to expand the system as the need arises. This is the approach taken in Web cluster systems. However, providing effective scalability in a Web cluster system is stil1 an open issue. In this study, we implement a Web cluster system based on Layer 7 switching technique on Linux. The implementation is based on a design proposed and implemented by Aron et al., but on the FreeBSD. Though the design li the same, due to the vast difference between the FreeBSD and Linux, the implementation presented in this paper is totally new. We also propose the Dual Scheduling (DS) load distribution algorithm that distributes the requests to the system resources by observing the variations in the request rate. We show through measurement on our implementation that the DS alorithm performs considerably bettor than previous algorithms.

• Journal of Satellite, Information and Communications
• /
• v.11 no.2
• /
• pp.55-59
• /
• 2016

Conventional RF energy harvesting systems can harvest energy and decode information from same source as an Hybirid-AP (H-AP). However, harvesting efficiency is seriously dependent on distance between users and H-AP. Therefore, in this paper, we proposed a transmission model for RF harvesting consisting of information and power source separately called Decoupled RF Energy harvesting networks. Main purpose of this paper is to maximize energy efficiency under various constraints of transmit power from H-AP and power beacon (PB), minimum quality of service and quality of harvested power of each users. To measure proposed model's performance, we proposed optimal time scheduling algorithms for energy efficiency (EE) maximization using Lagrangian dual decomposition theory that locally maximizes the EE by obtaining suboptimal values of three arguments : transmit power of H-AP, transmit power of PB, frame splitting factor. Experiment results show that the proposed energy-efficient algorithms converge within a few iterations with its optimality and greatly improve the EE compared to that of baseline schemes.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.94-103
• /
• 2003

In case of environment requiring safety such as human body and requiring flexible shape, a conventional mechanical actuator system does not satisfy requirements. Therefore, in order to solve these problems. a research of various smart material such as EAP (Electro Active Polymer), EAC (Electro Active Ceramic) and SMA (Shape Memory Alloy) is in progress. Recently, the highest preferring material among various smart material is EP (Electrostictive Polymer), because it has very fast response time, powerful force and large displacement. The previous researches have been studied properties of polymer and simple control, but present researches are studied a polymer actuator. An EP (Electostrictive Polymer) actuator has properties which change variably ils shape and environmental condition. Therefore, in order to coincide with a user's purpose, it is important not only to decide a shape of actuator and mechanical design but also to investigate a efficient controller. In this paper, we constructed the control logic with an adaptive fuzzy algorithm which depends on the physical properties of EP that has a dielectric constant depending on time. It caused for a sub-actuator to operate at the same time that a sub-actuator system operation increase with a functional improvement and control efficiency improvement in each actuator, hence it becomes very important to manage it effectively and to control the sub-system which Is operated effectively. There is a limitation on the management of Main-host system which has multiple sub-system, hence it brings out the Multi-Vehicle Control process that disperse the task efficiently. Controlling the multi-dispersion system efficiently, it needs the research of Main-host system's scheduling, data interchange between sub-actuators, data interchange between Main-host system and sub-actuator system, and data communication process. Therefore in this papers, we compared the fuzzy controller with the adaptive fuzzy controller. also, we applied the scheduling method for efficient multi-control in EP Actuator and the algorithm with interchanging data, protocol design.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9A
• /
• pp.784-789
• /
• 2011

In this paper, a precoder based on limited phase feedback is proposed to maximize user's receive signal-to-interference-plus-noise ratio (SINR) in coordinated multi-point (CoMP) coordinated scheduling / coordinated beamforming (CS/CB) precoding matrix indicator (PMI) scenario. Most conventional precoding techniques based on limited phase feedback have been considered in a single-cell environment. However, considering neighboring cells in a multi-cell environment, we enhance the conventional preocoding. method. First, to maximize receive SINR, precoding matrices are designed to maximize the serving cell's signal and to minimize the coordinated cells' signal. Also, a precoder which can be used in a limited bit feedback condition is suggested. Finally, the proposed precoder's performance is evaluated and compared with some other precoding techniques by using simulation under the CoMP CS/CB PMI scenario.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.6
• /
• pp.648-653
• /
• 2011

In this paper, coordinated space division multiple access(SDMA) technology is proposed to mitigate inter-cell interference by using partial channel state information in cooperative wireless communications system with limited feedback. Each AT selects an optimal cluster transmission mode and sends it back to a cluster scheduler, and at the cluster scheduler, ATs are scheduled within a AT group with the identical cluster transmission mode, and the optimal transmission mode and the corresponding scheduled ATs are determined to maximize scheduling priority. Also, in order to enhance multiuser diversity gain, an extended transmission feedback method is proposed to feed back multiple preferred cluster transmission modes at each AT. It is shown that the proposed coordinated SDMA scheme outperforms existing non-coordinated SDMA schemes in terms of the average system throughput.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.1
• /
• pp.78-85
• /
• 2008

Most researches for power management have focused on increasing the utilization of system performance by scaling operating frequency or operating voltage. If operating frequency is changed frequently, it reduces the real system performance. To reduce power consumption, alternative approaches use the limited number of operating frequencies or set the smoothing frequencies during execution to increase the system performance, but they are not suitable for real time applications. To reduce power consumption and increase system performance for real time applications, this paper proposes a new power-aware schedule method by allocating operating frequencies and by setting smoothing frequencies. The algorithm predicts so that frequencies with continuous interval are mapped into discrete operating frequencies. The frequency smoothing reduces overheads of systems caused by changing operating frequencies frequently as well as power consumption caused by the frequency mismatch at a wide frequency interval. The simulation results show that the proposed algorithm reduces the power consumption up to 40% at maximum and 15% on average compared to the CC RT-DVS.

• The KIPS Transactions:PartD
• /
• v.8D no.5
• /
• pp.605-612
• /
• 2001

In order to solve the overload of academic affairs management system, we propose a method builds a distributed Replication server and uses this server with the present centralized system. Normal query transactions which are not required for data modification are composed of almost all DML sentences. So we construct the distributed replication servers according to the data characteristics and make them perform the query transaction without modification. In this way, we can simultaneously distribute users and data, and cut down processing time for every transaction. Also Replication server has the advantages of implemental efficiency and economical because it uses resources of present centralized system without and additional configurations. Usually, to distribute the overload of server, they can use way, Client-side overload distribution that user program get present overload status then can choose a less overloaded server, and the other way, Server-side overload distribution that make use of Application Layer Scheduling Technique and IP Layer Scheduling Technique. Our Replication server can reduce the overload of centralized system by eliminating or complementing those defects of overload distribution, referred to in the forehead.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9B
• /
• pp.1272-1280
• /
• 2010

WFQ (Weighted Fair Queuing) provides not only fairness among traffic flows in using bandwidth but also guarantees the Quality of Service (QoS) that individual flow requires, which is why it has been applied to the resource reservation protocol (RSVP)-capable router. The RSVP allocates an enough resource to satisfy both the rate and end-to-end delay requirements of the flow in condition of no packet loss, and the WFQ guarantees those QoS requirements with the allocated resource. In a practice, however, most QoS-guaranteed services, specially the Voice of IP, allow a few percent of packet loss, so it is strongly desired that the RSVP and WFQ make the best use of this allowable packet loss. This paper enhances the WFQ to allow packet loss and investigates its performance. The performance evaluation showed that allowing the packet loss of 0.4% can improve the flow admission capability by around 40 percent.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1A
• /
• pp.44-53
• /
• 2010

This paper proposes a traffic management policy for delay control in the wireless networks. The so-called EDD(Earliest Due Date) scheme is adopted as the packet scheduling policy, so that the service provision is performed in the order of the transmission urgency of the backlogged packets. In addition, we derive a formula to determine the contention window, one of the MAC parameters, with the goal of minimizing the non-work conserving characteristics of the traditional MAC scheme. This method eliminates the burden of the class-wise parameter settings which is typically required for the priority control. Simulations are performed to show the validity of the proposed scheme in comparison with the policy that adopts the class-level queue management such as the IEEE 802.11e standard. Smaller delays and higher rates of delay guarantees are observed throughout the experiments.