• Journal of Veterinary Clinics
• /
• v.32 no.3
• /
• pp.239-242
• /
• 2015

Trypanorhych plerocercoids of Nybelinia surmenicola are described in the common squid, Todarodes pacificus, through the use of light and scanning electron microscopy. Upon dissection, out of 200 common squid from the Korean coastal water, 54 (27%) were found infected with N. surmenicola plerocercoids. Mean N. surmenicola abundance was 2.28 per squid. Body length and width ranged from $6.1-11.1(8.05){\times}2.0-2.2(2.1)mm$. Bothria are broad, bean-shaped, measured $2.4-2.8{\times}0.62-0.69(2.65{\times}0.64)mm$. The short and long tentacular armatures which are spirally arranged are homeoacanthous and homeomorphous uncinate hooks and consist of compact rose-thorn-shaped tentacular hooks. The tentacle sheaths are coiled in a spiral near the bulbs. Four large bothria are separated by filiform microtriches along the bothridal margins. This is the first description of the plerocercoids of N. surmenicola in the common of squid from the Korean coastal waters.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.4
• /
• pp.421-428
• /
• 2012

In this study, the effects of surface oxide film formation on the fatigue behavior of 7075-T6 aluminum alloy were analyzed in terms of the corrosion time of the alloy. The aluminum material used is known to have high corrosion resistance due to the passivation phenomenon that prevents corrosion. Aluminum alloys have been widely used in various industrial applications such as aircraft component manufacturing because of their lighter weight and higher strength than other materials. Therefore, studies on the fatigue behavior of materials and passivation properties that prevent corrosion are required. The fatigue behavior in terms of the corrosion time was analyzed by using a four-pointing bending machine, and the surface corrosion level of the aluminum material in terms of the corrosion time was estimated by measuring the surface roughness. In addition, fractographic analysis was performed and the oxide films formed on the material surface were studied by scanning electron microscopy (SEM). The results indicated that corrosion actively progressed for four weeks during the initial corrosion phase, the fatigue life significantly decreased, and the surface roughness increased. However, after four weeks, the corrosion reaction tended to slow down due to the passivation phenomenon of the material. Therefore, on the basis of SEM analysis results, it was concluded that the growth of the surface oxide film was reduced after four weeks and then the oxide film on the material surface served as a protection layer and prevented further corrosion.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.4
• /
• pp.371-377
• /
• 2014

In tissue engineering, a scaffold is a three-dimensional(3D) structure that serves as a template for regeneration the functions of damaged tissues or organs. Among materials for scaffolds, polycaprolactone(PCL) and ${\beta}$-tricalcium phosphate(${\beta}$-TCP) are biodegradable and biocompatible. In this study, we fabricated 3D PCL, blended PCL (60 wt %)/${\beta}$-TCP (40 wt %), and pure ${\beta}$-TCP scaffolds by a multi-head scaffold fabrication system. Scaffolds with a pore size of $600{\pm}20{\mu}m$ was observed by scanning electron microscopy. The effects of 3D PCL, blended PCL (60 wt %)/${\beta}$-TCP (40 wt %) and pure ${\beta}$-TCP scaffolds were analyzed by evaluating their mechanical characteristics. In addition, in an in-vitro study using osteoblast-like saos-2 cells, we confirmed the effects of 3D scaffolds on cellular behaviors such as cell adhesion and proliferation. In summary, the 3D blended PCL (60 wt %)/${\beta}$-TCP (40 wt %) scaffold was found to be suitable for human cancellous bone in terms of its the compressive strength, biocompatibility, and osteoconductivity. Thus, blending PCL and ${\beta}$-TCP could be a promising approach for fabricating 3D scaffolds for effective bone regeneration.

• Korean Journal of Food Science and Technology
• /
• v.35 no.6
• /
• pp.1117-1123
• /
• 2003

The effects of heat treatment on the physical and physical and physiological properties of wax gourd (Benincasa hispida) were examined. The applied heat treatments were autoclaved at $121^{\circ}C$ for 1 hr, boiled for 30 min, and microwaved at 680 W for 5 min. The water retention capacity (WRC) of the wax gourds was 9.43 g/g for the microwaved samples, 5.12 g/g for the boiled samples, 4.63 g/g for the raw samples, and 2.61 g/g for the autoclaved samples. Heat treatment caused to increase swelling by up to $4.4{\sim}7.8\;mL/g$. Calcium binding capacity of heat-treated wax gourd increased in the order of microwaved, boiled, raw, autoclaved samples. Scanning electron microscopy (SME) showed that autoclaving caused the most severe structural modifications, while microwave treatment produced the least modifications. The retarding effect on glucose and bile acid transport depended on the heat treatment. Only boiling showed the glucose retardation effect. Bile acid retardation effect increased in order of boiling (22.9%), autoclaving (17.1%), microwave treatment (14.3%), and raw wax gourd (8.6%). The cadmium retardation effect was significantly high in all samples.

• Korean Journal of Food Science and Technology
• /
• v.23 no.2
• /
• pp.235-240
• /
• 1991

Starch phosphates were prepared from the corn starch mixed with 2% sodium tripolyphosphate by twin-screw extruder with a feed rate of 20 kg/hr and an extrusion temperature of $130^{\circ}C$, and the effects of extrusion variables on the physicochemical properties (target parameters) of starch phosphates were investigated. Interrelations of system parameters (specific mechanical energy and extrudate moisture) and rheological properities of starch was analyzed by using the response surface analysis. Degree of substitution (DS) was increased with increasing the feed moisture, and showed the maximum value at the screw of near 250 rpm, Degree of gelatinization was proportionally increased with increasing the screw speed and decreasing the feed moisture. Apparent viscosity of the paste was increased with increasing the feed moisture, but it was not significantly affected by the screw speed. It was found by scanning electron microscopy that the starch microgranules were much more degradaded, and as consequent result, the intrinsic viscosity was decreased, whereas, water solubility index was increased. The rate of retrogradation of the gels was retarded with increasing DS and decreasing viscosity.

• Food Science of Animal Resources
• /
• v.25 no.3
• /
• pp.350-356
• /
• 2005

We examined the enhancement of thermotolerance for storage conferred on Lactobacillus acidophilus 30SC by adaptation to different stresses. The viable cells of Lactobacillus acidophilus 30SC were compared with their viability prior to heating at $45,\;55^{\circ}C\;and\;60^{\circ}C$. Heat-adapted ($45^{\circ}C$ for 15 min) L. acidophilus 30SC in MRS broth exhibited higher survivability at lethal temperature of $55^{\circ}C$ than control. Cellular protein profiles of L. acidophilus 30SC during heat adaptation were examined with SDS-PAGE, and scanning electron microscopy. When L. acidophilus 30SC was heat-adapted at $55^{\circ}C$ for 15min, 5 new protein spots of ca $8\~45\;kDa$ size were observed on 2D SDS-PAGE. It was presumed that new proteins of L. acidophilus 30SC were produced to adapt to the environment of higher growth temperature.

• Korean journal of food and cookery science
• /
• v.26 no.6
• /
• pp.677-684
• /
• 2010

The purpose of this study was to investigate the effects of black foods (black rice and black garlic) and the ratio of black garlic on the quality of Sulgiddeok. Pasting properties as measured by a rapid visco analyzer (RVA) were lower for black rice flour than white rice flour. Colorimetric analysis revealed that L, a, b values were dependent on the type of rice. For texture profiles, texture was associated with RVA profiles. During storage, hardness of black rice Sulgiddeok increased to a lesser degree than that of control. After observation via scanning electron microscopy (SEM), black rice Sulgiddeok showed a honeycomb-like network structure. In sensory analysis, black rice Sulgiddeok showed a tendency to prefer the control. The addition of appropriate black garlic (BG1) helped to improve the quality. In accordance with the aforementioned results, decreased retrogradation related to black rice Sulgiddeok and black foods (black rice and black garlic) could result in quality products with high nutritional value.

• Membrane Journal
• /
• v.23 no.2
• /
• pp.151-158
• /
• 2013

The effect of layered double hydroxides (LDH) on the gas separation properties of ethylene vinyl acetate copolymer was investigated. Mg-Al LDH/EVA nanocomposite membranes were prepared from solution intercalation using organically modified LDH (DS-LDH). Dodecyl sulfate (DS)-LDH was obtained by the intercalation of DS anion in the interlayer. The nanocomposite structure has been elucidated by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM). XRD pattern clearly shows that the DS-LDH layers are disorderly well dispersed in the EVA matrix. The maximum tensile strength and elongation of the LDH/EVA nanocomposite membrane were found with the LDH content 3 wt%. The thermal properties of nanocompostie membrane were enhanced by the incorporation of LDH in EVA matrix. Gas permeation of LDH/EVA nanocomposite membranes with LDH contents of 1, 3, 5 wt% was studied for $O_2$ and $CO_2$ single gases. The presence of 3 wt% LDH decreased $O_2$ permeability by up to 53% compared to the EVA membrane. In spite of barrier property of nanocomposite membrane, however, the gas permeability for $CO_2$ was increased due to its strong affinity with the residual OH groups on the LDH.

• Journal of Veterinary Clinics
• /
• v.27 no.1
• /
• pp.93-96
• /
• 2010

We describe a case of enterolithiasis in an eight-year-old male Grant's zebra (Equus burchelli boehmi) that died after a 10-day history of depression, anorexia, dehydration and colic. On necropsy, an enterolith was discovered at the conjunction of the descending colon and the rectum. The spherical enterolith weighed 1,660 g and was $13.5cm{\times}8cm$ in size. According to scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS), the nidus consisted primarily of $SiO_2$ with outer layers of magnesium and phosphate. The formation of enteroliths is closely related to diet. We suggest that this captive zebra's diet, which consisted primarily of alfalfa hay with mineral supplements, was the cause of enterolithiasis in this case. This is the first report of enterolithiasis in a captive equid in Korea. Our findings provide information valuable for the development of dietary guidelines to prevent enterolithiasis in captive wild equids.

• Journal of Plant Biotechnology
• /
• v.37 no.1
• /
• pp.77-83
• /
• 2010

Eighteen cultivars of tomato were tested for their regeneration response. Lycopersicon esculentum cv. 2001-58 showed a very high frequency of regeneration (93%). We evaluated the effect of two compounds with known antioxidant activity (ascorbic acid and cystein). The use of ascorbic acid ($200\;-\;300\;{\mu}M/L$) has a positive effect on shoot regeneration. To develope a system for plastid transformation in tomato via homologous recombination, we constructed the tomato plastid expression vector (pKRT22-AG) harboring 2.2 kb flanking sequences cloned from intact plastid genome and gfp gene. To investigate the factors affecting the delivery system of the pKRT22-AG into chloroplast using bombardment, We assessed the optimal DNA concentration, gold particle volume and target distance. Expression of the GFP protein was observed within chloroplast on protoplast of cotyledon explant by confocal laser scanning microscopy, which indicates that the protocol developed in this study be useful for the production of plastid transgenic plants in tomato.