• 한국수학교육학회지시리즈C:초등수학교육
• /
• 제22권1호
• /
• pp.29-48
• /
• 2019

이중 척도 모델은 서로 다른 두 척도를 이용하는 시각적 모델로(정영옥, 2015), 그동안 이중 척도 모델에 관한 국내 연구는 주로 이중수직선에 한정되어 이루어졌으며, 우리나라 교과서에 이중 척도 모델을 어떻게 활용할 수 있는지에 대한 연구는 제한적으로 이루어졌다. 이에 본 연구에서는 이중 척도 모델을 적극적으로 활용하고 있는 일본 교과서를 분석하였는데, 구체적으로 이중 척도 모델이 제시된 단원의 학습 내용, 제시 목적, 형태의 변화 과정 및 문제 맥락의 특징을 중심으로 살펴보았다. 분석 결과, 이중 척도 모델은 곱셈과 관련된 학습 내용을 연결하여 지도하는 데 유용한 시각적 모델이며 특히 비율 맥락에서 사용하기에 적합하다는 것을 확인하였다. 또한 학년에 따라 이중 척도 모델의 제시 목적을 점진적으로 확대하고, 형태를 단계적으로 도식화함으로써 학생들의 이해를 돕고 있음을 알 수 있었다. 이와 같은 결과를 토대로 본 연구는 이중 척도 모델의 체계적인 활용 방안에 관해 시사점을 제시한다.

• Journal of information and communication convergence engineering
• /
• 제19권4호
• /
• pp.205-213
• /
• 2021

The properties of a scale-free network are little known; its node degree following a power-law distribution is among its few known properties. By selecting real-field scale-free networks from a network dataset and comparing them to other networks, such as random and non-scale-free networks, the topology characteristics of scale-free networks are identified. The assortative coefficient is identified as a key metric of a scale-free network. It is also identified that most scale-free networks have negative assortative coefficients. Traditional generation models of scale-free networks are evaluated based on the identified topology characteristics. Most representative models, such as BA and Holme&Kim, are not effective in generating real-field scale-free networks. A link-rewiring method is suggested that can control the assortative coefficient while preserving the node degree sequence. Our analysis reveals that it is possible to effectively reproduce the assortative coefficients of real-field scale-free networks through link-rewiring.

• 자원ㆍ환경경제연구
• /
• 제9권5호
• /
• pp.973-997
• /
• 2000

The carbon tax is one of several measures to reduce the green-house gases emitted from burning the fossil fuels, which has been much discussed internationally. The analyses of the effects of a carbon tax on individual countries have been carried out by applying the computable general equilibrium(CGE) models, especially models with the assumption of non-existence of scale economies. However, the introduction of scale economies to CGE models changes the simulation results drastically. In this paper, two CGE models are used to compute and compare the economic and $CO_2$ reduction effects of a carbon tax, one of with is the model with scale economies and the other is without scale economies. One of main results is that the analysis using the CGE model without scale economies may underestimate the effects of a carbon tax on GDP and reducing the emission of $CO_2$.

• 한국지진공학회논문집
• /
• 제7권6호
• /
• pp.49-57
• /
• 2003

지진하중에 대한 구조물의 동적 거동과 내진성능을 평가하기 위하여 유사동적실험기법이 흔히 사용되고 있으나, 실험장비의 제약과 구조물의 규모 등으로 대부분 축소모형실험에 의존하고 있다. 그러나 일반적인 상사법칙은 탄성범위에서 유도된 것으로 지진거동과 같은 비탄성 거동을 예측하는 경우에는 한계가 있기 때문에 축소모형의 실험결과를 원형 구조물에 직접 적용하는 것은 많은 주의가 필요하다. 본 연구에서는 원형구조물과 축소모형에 대한 철골모형을 실험 대상으로 하여 실제 축소모형 실험결과로부터 원형구조물의 거동을 예측하는 경우의 문제점을 확인하고, 그 해결방법을 모색하고자 한다. 실제로 축소모형실험에서는 원형구조물의 경계조건을 정확히 재현하기 어려우며, 축소모형의 제작과정과 실험과정에서의 모든 오차가 강성의 변화로 반영되어 나타난다. 따라서 본 연구에서는 기하학적 상사율과 축소모형의 변화된 강성비를 함께 고려한 수정된 상사법칙을 제안하였으며, 수정된 상사법칙이 적용된 축소모형에 대하여 유사동적실험을 수행하여 지진응답결과를 원형구조물의 결과와 비교하였다. 축소모형에 대한 유사동적실험결과로부터 제안된 상사법칙을 적용함으로써 원형구조물의 지진응답 재현이 효과적임을 입증하였다.

• 한국실내디자인학회논문집
• /
• 제28호
• /
• pp.265-265
• /
• 2001

The perceptual presentation of interior design is to represent an interior space planned by a designer as if people see it in reality. The perceptual presentation methods that have developed are perspectives, full-scale models, small-scale models, photography of models, video taping of models, computer images, computer animation, and virtual reality. The purpose of this study is to investigate limits of those perceptual presentation methods according to their characteristics. The methods have characteristics that are either static or dynamic and either monoscopic or stereoscopic. In terms of representing interior spaces and perceiving interior spaces, the dynamic characteristic is more helpful than the static characteristic because the dynamic characteristic provides consecutively changing views of interior spaces when people walk around within the spaces. The stereoscopic characteristic is more helpful than the monoscopic characteristic because the stereoscopic characteristic provides the binocular depth perception. Full-scale models, small-scale models, virtual reality that have dynamic and stereoscopic characteristics, are most effective. The next effective methods are video taping of models and computer animation that have dynamic and monoscopic characteristics. The last effective methods are perspectives and photography of models that have static and monoscopic characteristics. But the most effective methods can not be said that those are perfect because each of them still has limits. Designers have to consider the limits of each perceptual presentation method to find a way that shows their designs most effectively. To develop the perceptual presentation methods of interior design, researchers should focus on the helpful characteristics that are dynamic and stereoscopic.

• 한국주거학회논문집
• /
• 제13권6호
• /
• pp.79-88
• /
• 2002

The intent of this study is to investigate the feasibility of small-scale developments in residential blocks in the city, and to propose development strategies and models. This research is done on the premises that large housing developments ignore the urban structure of its own quality, whitens on-lot-based multi-unit housing developments fail to maintain amenity and livability in residential blocks. For solving these shortcomings, this research proposes the possibility of small-scale housing development models as an alternative development system. And some residential blocks were selected as case sites and analyzed into typical block types, to support the proposal of pertinent development types. Each type was investigated and discussed in terms of development feasibility and proper development strategies. Finally, three development schemes are proposed as prototypical models for the best application in residential blocks.

• 대한조선학회논문집
• /
• 제51권1호
• /
• pp.8-15
• /
• 2014

In this study, flow characteristics around the hull form of KLNG are investigated by numerical simulations. The numerical simulations of the turbulent flows with the free surface around KLNG have been carried out at Froude number 0.1964 using the FLUENT 6.3 solver with Reynolds stress turbulence model. Several GEOSIM models are adopted to consider the scale effect attendant on Reynolds number. Furthermore, a full scale ship is calculated and the result is compared with the numerical results of GEOSIM models. The calculated results of GEOSIM models and the full scale ship are compared with the experiment data of MOERI towing tank test and Inha university towing tank test. Moreover, wake distribution on the propeller plane of the full scale ship is estimated using the numerical results of GEOSIM models. The prediction result is directly compared with the simulation result in full scale.

• Nuclear Engineering and Technology
• /
• 제37권6호
• /
• pp.511-524
• /
• 2005

Thermalhydraulic reactor simulation of tomorrow will require a new generation of codes combining at least three scales, the CFD scale in open medium, the component scale and the system scale. DNS will be used as a support for modelling more macroscopic models. NEPTUNE is such a new generation multi-scale platform developed jointly by CEA-DEN and EDF-R&D and also supported by IRSN and FRAMATOME-ANP. The major steps towards the next generation lie in new physical models and improved numerical methods. This paper presents the advances obtained so far in physical modelling for each scale. Macroscopic models of system and component scales include multi-field modelling, transport of interfacial area, and turbulence modelling. Two-phase CFD or CMFD was first applied to boiling bubbly flow for departure from nucleate boiling investigations and to stratified flow for pressurised thermal shock investigations. The main challenges of the project are presented, some selected results are shown for each scale, and the perspectives for future are also drawn. Direct Numerical Simulation tools with Interface Tracking Techniques are also developed for even smaller scale investigations leading to a better understanding of basic physical processes and allowing the development of closure relations for macroscopic and CFD models.

• 대한원격탐사학회지
• /
• 제33권4호
• /
• pp.445-454
• /
• 2017

The performance of spatial downscaling models depends on the quality of input coarse scale products. Thus, the impact of intrinsic errors contained in coarse scale satellite products on predictive performance should be properly assessed in parallel with the development of advanced downscaling models. Such an assessment is the main objective of this paper. Based on a synthetic satellite precipitation product at a coarse scale generated from rain gauge data, two synthetic precipitation products with different amounts of error were generated and used as inputs for spatial downscaling. Geographically weighted regression, which typically has very high explanatory power, was selected as the trend component estimation model, and area-to-point kriging was applied for residual correction in the spatial downscaling experiment. When errors in the coarse scale product were greater, the trend component estimates were much more susceptible to errors. But residual correction could reduce the impact of the erroneous trend component estimates, which improved the predictive performance. However, residual correction could not improve predictive performance significantly when substantial errors were contained in the input coarse scale data. Therefore, the development of advanced spatial downscaling models should be focused on correction of intrinsic errors in the coarse scale satellite product if a priori error information could be available, rather than on the application of advanced regression models with high explanatory power.

• 화약ㆍ발파
• /
• 제25권1호
• /
• pp.53-65
• /
• 2007

축소모형을 이용한 철근콘크리트 구조물 발파해체 시 구조물의 붕괴거동을 분석하기 위해서는 축소모형 부재에 대한 적절한 축소율 산정과 축소모형 부재를 구성하는 재료의 역학적 특성이 원형 철근콘크리트 부재와 상사되어야 한다. 본 연구에서 축소모형의 상사법칙은 밀도를 기준으로 산정하였고, 콘크리트 표준시방서와 콘크리트 구조설계기준에 의해 축소모형 철근콘크리트의 배합 및 배근을 기술하였다. 또한 축소모형 콘크리트의 축소율은 굵은골재 최대치수를 고려하여 부재 단면 길이를 1/5로 축소하였고, 축소모형 철근의 축소율은 공칭지름을 1/5로 축소하였다. 축소모형에 대한 역학적 실험결과로부터 제안된 상사법칙을 적용함으로써 축소모형 콘크리트의 평균압축강도 및 축소모형 철근의 평균항복강도가 상사관계를 가지는 것으로 나타났다.