• 한국안전학회지
• /
• 제10권4호
• /
• pp.87-96
• /
• 1995

It is only three(3) years since we applied brackets for scaffolding in the construction area. Unfortunately, there is no structural criteria on how to install those in the site so far, despite the fact that those brackets have been applied into the site by the firms already. It is shown that resistant capacity of each bracket type has been investigated, analyzed from this experimental study. Accident-concerning data on construction site analyzed by the Ministry of Labor, show temporary structure involves 18.6% of the total industrial accident, which the accidents from scafold-supporting brackets have rate of 42.5% of the ones occurred from the temporary structures. There are two main aspects to be observed : one is how much resistant capacity the brackets have themselves, the other is how exactly to install those without eccentricity. But practically, nobody does check of this bolt-installing conditions in the site and no check of tightening level of nut because there is no available tool to check torque amount for this kind of nut. We just have to rely on scaffolders experience of this tightening. This experiment involves just this variable of tightness at site. Eventually this insufficient tightness causes to collapse those scaffolding structures. The bracket might have less the one than its original capacity due to this insufficient tightness. Three(3) times of PIVOT tests show that fractured condition of two(2) row brackets has occurred mostly at lower bolt due to shear force. Therefore, tightness of bracket-installing bolt, tensile strength of the bolt, shear strength of the bolt, loading condition with equal two point or inequal two point loads, are mainly investigated as variables in this study.

• 한국산학기술학회논문지
• /
• 제21권11호
• /
• pp.78-85
• /
• 2020

멤브레인(membrane) LNG 운반선 화물창(cargo containment)의 공사 작업대인 비계 시스템(scaffolding system)은 다양한 형상의 부재들로 구성된 대형 트러스 구조물이다. 비계 시스템의 설치 기간 및 공정을 단축하기 위해서는 모듈의 탑재 단위를 기존의 2단에서 8단으로 대형화하는 것이 매우 효과적이다. 모듈이 대형화하여 탑재 하중이 증가하면 메인 수직 파이프를 연결해주는 핀(pin)과 홀(hole) 주위의 국부 응력 증가가 예상되므로 구조안전성을 확보하기 위한 사전 평가가 중요하다. 본 연구에서는 인장강도 시험을 통해 파손 취약 부위를 확인하고 이에 대한 구조 안전성을 정량적으로 검토하기 위해 접촉 응력 해석을 수행하였다. 인장강도 시험을 통해 최상부의 수직 방향 파이프에 발생하는 평균 하중 부근에서 홀의 변형이 육안으로 관찰되었으며, 홀 주위의 응력 크기는 접촉 응력 계산을 통해 확인하였다. 접촉 문제를 Herzian 접촉 응력 관점에서 접근하였고, 핀과 홀을 포함하는 부분의 재료 항복강도와 접촉 응력의 비교를 통해 8단 탑재의 가능성을 검토하였다. 결과로서, 기존 재료의 비계를 이용한 8단 탑재 방안은 부적합함을 확인하였으며, 파손 취약 부위에 대한 정량적 구조평가 결과를 바탕으로 8단 탑재 시의 구조안전성 확보를 위한 방안들을 제시하였다.

• 국제초고층학회논문집
• /
• 제4권3호
• /
• pp.161-169
• /
• 2015

Experience on the construction of several 100-plus-story skyscrapers including Guangzhou West Tower, Guangzhou East Tower, and Shenzhen's KK100 is described considering the increasingly strong development trend of 100-plus-story skyscrapers in China. Difficulties in the construction of 100-plus-story skyscrapers are investigated. Four innovative construction technologies receive detailed descriptions: intelligently and entirely-jacked work platforms, formwork and suspension scaffolding systems ("jacking and formwork systems"), multi-function low-carbon concrete, 5D-BIM ("five-dimensional building information modeling"), and safe and rapid vertical transport, as they have found successful applications in actual projects. Popularized systematically as technical achievements, these technologies will significantly influence the construction of similar projects in the future, and produce more social and economic benefits.

• 한국산학기술학회논문지
• /
• 제22권3호
• /
• pp.94-100
• /
• 2021

멤브레인(membrane) LNG 운반선 화물창(cargo containment) 공사의 생산성 향상을 위해서는 공사 작업대인 비계 시스템(scaffolding system)의 설치 기간 및 공정 단축이 요구된다. 이를 위한 효과적인 방안으로 모듈의 탑재 단위를 기존의 2단에서 8단으로 대형화하자는 의견이 수렴되고 있다. 하지만, 모듈의 대형화로 인해 탑재 하중이 증가하면 메인 수직 파이프를 연결해주는 핀(pin)과 홀(hole) 주위에 국부 응력이 증가하여 재료의 항복응력을 초과하게 되는 문제점이 발생한다. 본 연구의 목적은 이러한 문제점을 해결하기 위해 트리즈(TRIZ)를 도입하여 새로운 대형 모듈의 탑재 방안을 수립하는 것이다. 본 연구에서는 트리즈의 여러가지 문제해결 도구 중 하나인 40가지 발명원리를 활용하는 방안을 채택하였다. 먼저 기술적 모순을 도출하고, 공학변수를 선정하였으며, 모순행렬을 활용하여 기술적 모순을 극복하기 위한 효율적인 발명원리를 선정하였다. 선정된 발명원리를 통해 일반해결안 및 특정해결안을 도출하였고, 구조해석을 통해 구조물에 발생하는 응력이 낮은 수준임을 확인하였다. 수립된 탑재 방안을 적용한 대형 모듈의 실제 탑재에 성공함으로써 트리즈의 유용성을 확인하였다.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 1997년도 추계 학술논문발표회 논문집
• /
• pp.157-164
• /
• 1997

Construction accident happens all of the process in work and contains materials types of causes. Especially, temporary work material in the great problem in industrial accident. Because temporary work In essential to build the main structure. The most frequent type of accident by the temporary work is the falling and so on. Its causes were the failure of scaffolding, imperfection of temporary material etc. These accident properties the Primitive and repetitive accident. The prevention counterplan of construction accident by temporary material work in need to protect worker and make more safer construction site. Therefore in this paper analyzed of the serious accident of construction by the temporary work material and present reasonable solution method to reduce the construction accident by the temporary work material.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.279-284
• /
• 2002

Prestressed concrete(PSC) bridge structures with a number of continuous spans has been segmentally built in many countries. These methods include incremental launching method, movable scaffolding method, full staging method and balanced cantilever method. In these segmentally constructed prestressed concrete bridges, many construction joints exist and these construction joints are weak points in PSC bridges. The prestress force can be introduced prestress force continuously through the construction joints of PSC bridge superstructure using tendon couplers. The main objective of this study is to evaluate the structural behavior and ultimate flexural strength of construction joints in PSC girder bridge members. To this end, a comprehensive experimental program has been set up and a series of full-scale tests have been performed. Ultimate flexural strength of construction joint in PSC members with tendon couplers is decreased by approximately 10% for non-coupled members.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.127-128
• /
• 2023

The construction industry is increasingly adopting vision AI technologies to improve efficiency and safety management. However, the complex and dynamic nature of construction sites can pose challenges to the accuracy of vision AI models trained on datasets that do not consider the background. This study investigates the effect of background on object recognition for vision AI in construction sites by constructing a learning dataset and a test dataset with varying backgrounds. Frame scaffolding was chosen as the object of recognition due to its wide use, potential safety hazards, and difficulty in recognition. The experimental results showed that considering the background during model training significantly improved the accuracy of object recognition.

• 한국건축시공학회지
• /
• 제14권2호
• /
• pp.177-186
• /
• 2014

The gang-form widely used in apartment construction sites has advantages compared to scaffolding in preventing falling accidents. One problem, however, is that safety accidents associated with gang-form works repeatedly occur due to worker carelessness. In this study, hierarchical checking tables are provided to support safety management activities for the gang-form works at the sites. Through a survey of experts and analyses of case studies of construction accidents, 137 safety check items are classified by participant type based on a hierarchical safety check scheme. The applicability and effectiveness of the hierarchical checking tables was evaluated through interviews with experts. It was found that the hierarchical checking tables enabled each gang-form related participant to check his own safety management items, and provided a level-wise structure to site safety management systems.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.162-163
• /
• 2013

A temporary work are lifting equipment that tower crane or lift, and temporary architectures that office building and storage in construction site. And it is main construction work that built and used temporarily like to a scaffolding, a walk plate, and a formwork. This study is to adjust breakdown structure of temporary work to introduce technical tendency. With a site manager, it is collected a detailed statement and compared. As a result to break down a tendency that temporary equipment, additional function, and direct work of temporary technique, first, existing detail technical indexes that group I, group J, group K, and group L are classified. Second, due to set up and manage to main agents in case of existing detail technical indexes that B1, B2, it is not wrong to classify. But, it is somewhat different, and therefore adjust it to same level. Finally, as a technical tendency that temporary equipment, additional function, and direct work of temporary technique, it is adjusted the others.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.195-199
• /
• 2015

Many conventional management methods have emphasized the minimization of required resources along the supply chain. Accordingly, this paper presents a proposed method called the Virtual Design and Construction (VDC)-aided system. It is based on object-oriented resource control, in order to accomplish a feed-forward control monitoring supply chain logistics. The system is supported by two main parts: (1) IT-based Technologies; and (2) VDC Models. They enable the system to convey proactive information from the detection technology to its linked visualization. The paper includes a field study as the system's pre-test: the Scaffolding Works in a LNG Mega Project. The study demonstrates a system of real-time productivity monitoring by use of the RFIDbased Mobile Information Hub. The on-line 'productivity dashboard' provides an opportunity to display the continuing processes for each work-package. This research project offers the observed opportunities created by the developed system. Future work will entail research experiments aimed towards system validation.