• 제목/요약/키워드: sameAs

검색결과 39,232건 처리시간 0.056초

한국어의 세대별 음향 연구 -단순모음을 중심으로- (A Study on vowel length of Korean monophthong)

  • 이재강
    • 한국음향학회:학술대회논문집
    • /
    • 한국음향학회 2000년도 하계학술발표대회 논문집 제19권 1호
    • /
    • pp.325-328
    • /
    • 2000
  • According to H.B.Lee(1993), standard Korean vowel qualities are as follows: in /i/, /e/, $/\epsilon/$, /a/, /o/, /w/, they have 4 qualities each other and in /er/ there are 3 qualities. The environments of 4 qualities are iong and stressed vowel in word initial, short and stressed vowel in word initial, unstressed vowel in word initial, unstressed vowel in word finial. The aim of this study is to seek and compare with H.B.Lee(1993). Conclusively I could not find on the whole any pattern of the same types of H.B.Lee(1993) in this study And especially in Fl vowel formant values of /er/and /w/, I never found any pattern of the same types of H.B.Lee(1993). Also F2 vowel formant values of $/\varepsilon/$ and /w/ do not have any kind of pattern of the same types of H.B.Lee(1993), between them, the patternize of F2 vowel formant values in /w / is especially difficult. It is the same story of Jaekang Lee(1998). But in some case, the patternize could be done. among the whole vowels, analysis environment b has the wide width on the change of the formant value. As the another result of the analysis It is to possible to make the pattern of the old male group. The old male group on the whole is analyzed to have the most low formant values and the old women group is analyzed to have the most high formants values, but in the most high formant valus there are young women group. And the formant values's rising in 2 cases of the formant value of /er/ is analyzed to have the same pattern of H.B.Lee(1993).

  • PDF

ASSESSING CALIBRATION ROBUSTNESS FOR INTACT FRUIT

  • Guthrie, John A.;Walsh, Kerry B.
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1154-1154
    • /
    • 2001
  • Near infra-red (NIR) spectroscopy has been used for the non-invasive assessment of intact fruit for eating quality attributes such as total soluble solids (TSS) content. However, little information is available in the literature with respect to the robustness of such calibration models validated against independent populations (however, see Peiris et al. 1998 and Guthrie et al. 1998). Many studies report ‘prediction’ statistics in which the calibration and prediction sets are subsets of the same population (e. g. a three year calibration validated against a set from the same population, Peiris et al. 1998; calibration and validation subsets of the same initial population, Guthrie and Walsh 1997 and McGlone and Kawano 1998). In this study, a calibration was developed across 84 melon fruit (R$^2$= 0.86$^{\circ}$Brix, SECV = 0.38$^{\circ}$Brix), which predicted well on fruit excluded from the calibration set but taken from the same population (n = 24, SEP = 0.38$^{\circ}$Brix with 0.1$^{\circ}$Brix bias), relative to an independent group (same variety and farm but different harvest date) (n = 24, SEP= 0.66$^{\circ}$ Brix with 0.1$^{\circ}$Brix bias). Prediction on a different variety, different growing district and time was worse (n = 24, SEP = 1.2$^{\circ}$Brix with 0.9$^{\circ}$Brix bias). Using an ‘in-line’ unit based on a silicon diode array spectrometer, as described in Walsh et al. (2000), we collected spectra from fruit populations covering different varieties, growing districts and time. The calibration procedure was optimized in terms of spectral window, derivative function and scatter correction. Performance of a calibration across new populations of fruit (different varieties, growing districts and harvest date) is reported. Various calibration sample selection techniques (primarily based on Mahalanobis distances), were trialled to structure the calibration population to improve robustness of prediction on independent sets. Optimization of calibration population structure (using the ISI protocols of neighbourhood and global distances) resulted in the elimination of over 50% of the initial data set. The use of the ISI Local Calibration routine was also investigated.

  • PDF

입원환자의 재선택 의향과 결정요인 (Factors related to willingness of choosing the same hospital)

  • 설동원;유승흠;박은철;김은석
    • 한국병원경영학회지
    • /
    • 제2권1호
    • /
    • pp.65-79
    • /
    • 1997
  • This study aims to measure in-patients' willingness to choose the same hospital, and to define the related factors. The willingness was measured by the fact whether in-patients would return to the same hospital for their future hospitalization and can be said as the essence of ascertaining patients' satisfaction. Data was collected from 236 patients hospitalized in two hospitals selected according to its superiority, one being superior in medical technique, the other being superior in facility and equipment. To enhance the comparability between the two hospitals, the department and the diagnosis were matched, and structured questionnaires were self-fill-up. The main findings are as follows. Hospitals were analyzed by their superiority : medical services, facility and equipment. In case of hospitals with superior medical services, the willingness was proportional to positive doctor-patient relationship, to satisfaction with the medical level, and to the acknowledgement of utility in cure. In case of hospitals with superior facility and equipment, the willingness was proportional to the satisfactory state of overall facility. Two types of hospitals were combined and analyzed. The willingness for choosing hospitals with superior medical services was stronger than that for choosing the other hospitals. The satisfaction with overall facility, satisfaction with medical level, acknowledgement of utility in cure, positive doctor-patient relationship, and better consultation produced higher willingness to choose the same hospital. The willingness for the option shows to what degree the hospital suffices patients' expectation. Patients' understanding views were obviously influential. The satisfaction level for medical aspect was more influential than the level for non-medical aspect.

  • PDF

중국어 상성이 중국인의 한자어 발음에 미치는 영향 연구: 부분이형동의어를 중심으로 (The Influence of Chinese Falling-Rising Tone on the Pitch of Sino-Korean Words Pronounced by Chinese Learners: Focusing on the Partly-Different-Form-Same-Meaning Words)

  • 유사양;김영주
    • 말소리와 음성과학
    • /
    • 제4권2호
    • /
    • pp.21-31
    • /
    • 2012
  • The purpose of this study is to find the influence of Chinese falling-rising tone on the pitch pattern of corresponding partly-different-form-same-meaning Sino-Korean words delivered by Chinese learners of Korean and to examine how the falling-rising tone of corresponding Chinese words affects the pitch patterns of Sino-Korean words. The scope of this research is limited to Chinese learners of Korean, especially on two groups of Sino-Korean words - AB:CB type and AB:AC type that the are second-most frequently occuring different-form-same-meaning Sino-Korean words. In this study, Chinese learners pronounced both Chinese words and corresponding Sino-Korean words. Learners' pitch patterns were recorded and analyzed using software and compared with the tone of corresponding Chinese words. Experimental results showed that AB:CB type Sino-Korean words were not affected by Chinese 'falling-rising tone - high and level tone'. As well as AB:CB type, experimental results showed there were no significant influence on the pitch pattern of AB:AC type Sino-Korean words by Chinese falling-rising tone. But it was clear that Chinese learners' made pitch errors on both AB:CB type and AB:AC type Sino-Korean words. In conclusion, the Chinese learners' pitch patterns of partly-different-form-same-meaning Sino-Korean words are different from Korean native speakers', but their pitch errors cannot be attributed to Chinese falling-rising tone.

단양 고수동굴과 여천굴의 환경요인과 그 동물상에 관한 연구 (Studies on Environmental Factors and Faune of Kosudong-gul Cave and Yoe chon-gul Cave in Dan-yang gun, Korea.)

  • 임문순
    • 동굴
    • /
    • 제1권1호
    • /
    • pp.17-22
    • /
    • 1975
  • The Kosudong-gul Cave at kosu-ri, Daegang-myon, Danyang-gun, Chung Chong Bug-do, Province was surveryed by this author on the 3rd of Nov. 1973, 6th of Jan. 1974, 30th of Aug. and 13th of Sept. 1975 through over several times field trips. Yoechon-gul Cave at Yoechon-ri, Gagok-myon, Danyang-gun, Chung Chong Bug-do, Province was surveyed by this author on the 30th of August, 1975. The enviromental factors of both caves checked the siftations for air temperature, water temperature, moisture and pH, as well as the faunae f both caves and ecollogically studieel them. Kosudong-gul Cave (1) The environmental factors checked was the same as table 1. (2) The fauna is 5 classes and 18 species and they classified as Troglobite......2 species-11.1%, troglophile.....5 species-27.7%, and trogloxene....11 species.-61.2%. Yochon-gul Cave (1)The environmental factor Checked was the same as table 2. (2) The fauna is 5 classes and 8 species and they classified as troglobite......1 species-11.1%, troglobite....4 species-44.4% and trogloxene.....4 species-44.4%.

  • PDF

사각덕트 내 이단 오리피스를 지나는 유동의 압력강하에 대한 수치해석 (A Numerical analysis on the pressure drop of the flow field past a two-staged orifice in a rectangular duct)

  • 송우열;김유곤
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회B
    • /
    • pp.2747-2752
    • /
    • 2007
  • A numerical study has been performed on the flow past a two-staged orifice in a rectangular duct. The flow field including the recirculation region behind the orifice was investigated and the pressure drop was calculated. Water was used as a working fluid and the flow was treated as the turbulent flow, of which the Raynolds number was 6000. The main parameters for the pressure drop and the recirculation region were the orifice's inclined angle against the duct, the interval between two orifices, the shape of the orifice's hole having the same area, and the change of the hole position at the same interval. The variation of the flow field was investigated with each parameter. Consequently, it was found that the most dominant parameter influencing the drop of the pressure was the change of the hole position at the same interval between orifices. Especially when the interval between orifices was narrow and the relative position the holes was changed, its effect to the flow field was shown most drastically as a result of this study. The SIMPLER algorithm with FLUENT code was employed to analyze the flow field.

  • PDF

2 1/4 Cr-1Mo강의 작은 표면균열의 성장에 관한 기초적 연구 (A Basic Study on Growth Characteristics of the Small Surface Crack in 21/4 Cr-1 Mo Steel)

  • 서창민;강용구
    • 한국해양공학회지
    • /
    • 제1권1호
    • /
    • pp.104-110
    • /
    • 1987
  • Fatigue tests by axial loading (R = 0.05) were carried out to investigate fatigue crack growth characteristics of small surface cracks in 2 1/4 Cr-1 Mo steel at room temperature by using flat specimens with a small artificial pit. All the data of the fatigue crack growth rate obtained in the present test are determined as a function of the stress intensity factor range about a semi-elliptical crack, so that the application of linear fracture mechanics to the surface fatigue crack growth and to the fatigue crack growth into depth, and all the data obtained from tests were discussed in comparison with the data of Type 304 stainless steel and two type of mild steel under the same test conditions. The obtained results are as follows: 1)When the cycle ratios are same, surface fatigue crack length and its depth are almost same and fall within a narrow scatter band in spite of different stress levels. 2)Relations of the surface fatigue crack growth rate (da/dN) and fatigue crack growth rate into depth (db/dN) to its stress intensity factor range ($\Delta K_{Ia}, \Delta K_{Ib}$) can be plotted as a straight line at log-log diagram without dependence of stress level and coincide with the data of part-through crack in various steels.

  • PDF

유한요소법을 활용한 자동차용 브레이크 호스의 변형 모드 분석 (Layout Analysis of Automotive Brake Hose Using the Finite Element Method)

  • 한성렬
    • 한국기계가공학회지
    • /
    • 제12권3호
    • /
    • pp.96-101
    • /
    • 2013
  • Automotive brake system is an essential element for the safety. The system is powered by the circulation of brake oil. A braker hose is used for the circulation of the oil in this system. Layout of the hose changes according to the steering and stress occur in the hose. A lot of the durability tests are performed in order to prevent serious problems such as hose bursting by the accumulation of the stress before setting an optimized hose layout on automobile. The test is conducted for the layout which is same such as set in automobile. In the test, brake hose layout shall exercise the same mode of thousands of times under the high temperature and periodic pressure condition and then the damage of the tested hose is inspected. This test, however, has a disadvantage of heavy consumption of time and money. In order to compensate for these drawbacks, the finite element method(FEM) study was performed to predict the changes in the layout of the brake hose. In this study, the FEM results and the test results were compared and the validity was verified. The radius of curvature of the FEM and test at the same positions were especially investigated for the validation. Also, this study will be used as the basis of research on the life prediction of brake hose.

화강토의 풍화도가 수분흡착 및 침투성에 미치는 영향 (A Study on the Moisture Adsorption and Permeability Characteristics of Weathered Granite Soils)

  • 이대훈;도덕현
    • 한국농공학회지
    • /
    • 제26권3호
    • /
    • pp.81-89
    • /
    • 1984
  • To examine the moisture adsorption and permeability characteristics, weathered granite soils of different degrees of weathering, cultivated upland soils and sands of Han-river were sampled. The results are as follows: 1. In case that the mother rock was same, the pF values under same moisture content decreased according as the grain size of soil became finer by the weathering process. 2. In case that the mother rock was different, the pF value varied by the behavior of clay minerals, and the cultivated upland soils showed more sensitive reaction than sands and fresh granite soils. 3. The pF value changed by the difference of primary moisture content and also influenced by soil structure, testing method and etc. 4. The pF value and compaction curve had close relation, however under same moisture content, the pF value decreased by the increment of density. 5. The permeability depend on the available void ratio between the soil particles according to the degree of weathering, and the pF value of available void water between the soil particles which related directly to permeability was about 3.3 except the void water holded in the soil particles. 6. As the above, the pF value and permeability were differentiated by degree of weathering, primary moisture content, density and etc. Therefore it is considered unreasonable to define uniformly by soil texture.

  • PDF

Effects of counter torque and transposition (transfer) of installed implants timing on their integration in dog tibia

  • Karimi, Mohammad Reza;Fathi, Shima;Ghanavati, Farzin
    • The Journal of Advanced Prosthodontics
    • /
    • 제7권1호
    • /
    • pp.62-68
    • /
    • 2015
  • PURPOSE. The purpose of this research was to evaluate the amount of reosseointegration after counter torquing (reverse torque) and transposing the installed implants at different times. MATERIALS AND METHODS. This study was done on ten tibiae of five cross-bred dogs. At the first day one implant was installed in each tibia. After one week half of the implants were randomly counter torqued (1WCT) and the other half were explanted and reimplanted in a new juxtaposition site (transposed)(1WT). At the same time three new implants were installed in each dog, one of them was considered as one week control (1WC) and remaining two as 8 week groups (8WCT&8WT). After eight weeks the 1WCT and 1WT implants were loosened by counter torque and the quantity of needed force for liberation was measured with the digital device (BGI). At the same time one implant was installed in each dog as eight week control (8WC) and the same protocol was repeated for 8 week groups after another 8 weeks. RESULTS. All implants were osseointegrated. Mean quantities of osseointegration in case groups indicated better amounts rather than control groups. CONCLUSION. Counter torque or transposition of the installed implants one week or eight weeks after the implantation did lead to osseointegration.