• Journal of Industrial Convergence
• /
• v.20 no.9
• /
• pp.47-58
• /
• 2022

Digital content is difficult to distinguish between the original and the replica due to its nature. For this reason, NFT technology using blockchain technology is attracting attention because it can guarantee the proof and scarcity of the original digital content. However, the NFT buyer does not own the copyright to the digital content, but the ownership. In particular, since the minting process of issuing NFTs is possible for anyone, there is a copyright threat to the copyright holder. In this study, we propose a verification protocol based on DID for the process of issuing and transacting NFTs for copyright protection of copyright holders' digital contents. As a research method, the problems of research cases related to digital contents were analyzed and the safety was comparatively analyzed. NFT issuance can only be issued by copyright holders whose identity has been verified through DID, and only users who have completed authentication can participate in the transaction to prevent indiscriminate theft and use of digital content and form a safe and transparent transaction market.

• Journal of the Korean Society of Radiology
• /
• v.15 no.1
• /
• pp.85-91
• /
• 2021

The purpose of this study is to derive an equation to verify the accuracy of the dose rate for each component calculated at the measurement point outside the maze door when designing the maze door of 6 MV X-ray beam. Based on the component-specific dose rate calculation formula for the measurement point outside the maze door described in NCRP Report 151 and IAEA Safety Report Series 47, the dose rate calculation formula for each component when applying the values of the drawing-based parameters and the dose rate calculation formula for each component when applying the values of conservative parameters are derived. From the two dose rate calculation formulas for each component, the dose rate verification formula for each component at the measurement point outside the maze door was derived. The resulting dose rate verification formula for each component at the measurement point outside the maze door can be compared and analyzed whether the dose rate for each component at the measurement point outside the maze door calculated by the designer falls within the range of the dose rate obtained from the derived dose rate verification formula for each component. This verification formula is considered to be practically useful in verifying the accuracy of the dose rate for each component calculated by the designer.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.64-77
• /
• 2015

An effective method for produce munitions effectiveness data is to calculate weapon effectiveness indices in the US military's Joint Munitions Effectiveness Manuals (JMEM) and take advantage of the damage evaluation model (GFSM) and weapon Effectiveness Evaluation Model (Matrix Evaluator). However, a study about the Range Safety that can be applied in the live firing exercises is very insufficient in the case of ROK military. The Range Safety program is an element of the US Army Safety Program, and is the program responsible for developing policies and guidance to ensure the safe operation of live-fire ranges. The methodology of Weapon Danger Zone (WDZ) program is based on a combination of weapon modeling/simulation data and actual impact data. Also, each WDZ incorporates a probability distribution function which provides the information necessary to perform a quantitative risk assessment to evaluate the relative risk of an identified profile. A study of method to establish for K-Range Safety data is to develop manuals (pamphlet) will be a standard to ensure the effective and safe fire training at the ROK military education and training and environmental conditions. For example, WDZs are generated with the WDZ tool as part of the RMTK (Range Managers Tool Kit) package. The WDZ tool is a Geographic Information System-based application that is available to operational planners and range safety manager of Army and Marine Corps in both desktop and web-based versions. K-Range Safety Program based on US data is reflected in the Korean terrain by operating environments and training doctrine etc, and the range safety data are made. Thus, verification process on modified variables data is required. K-Range Safety rather than being produced by a single program, is an package safety activities and measures through weapon danger zone tool, SRP (The Sustainable Range Program), manuals, doctrine, terrain, climate, military defence M&S, weapon system development/operational test evaluation and analysis to continuously improving range safety zone. Distribution of this K-range safety pamphlet is available to Army users in electronic media only and is intended for the standing army and army reserve. Also publication and distribution to authorized users for marine corps commands are indicated in the table of allowances for publications. Therefore, this study proposes an efficient K-Range Safety Manual producing to calculate the danger zones that can be applied to the ROK military's live fire training by introducing of US Army weapons danger zone program and Range Safety Manual

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.2
• /
• pp.121-128
• /
• 2020

The Marine Safety Culture Index (MSCI) was developed in the year 2018 for objectively assessing the public safety culture levels and for incorporating it as data to spread knowledge regarding the marine safety culture. The method for calculating the safety culture index should include issues that may affect the safety culture and should consist of appropriate attributes for estimating the current status. In addition, continuous verification and supplementation are required for addressing social and economic changes. In this study, to determine whether the questionnaire designed by marine experts reflects the people's interests and needs, we analyzed 915 marine safety proposals. Text mining was employed for analyzing the unstructured data of the marine safety proposals, and network analysis and topic modeling were subsequently performed. Analysis of the marine safety proposals was centered on attributes such as education, public relations, safety rules, awareness, skilled workers, and systems. Eighteen questions were modified and supplemented for reflecting the marine safety proposals, and reliability of the revised questions was analyzed. Furthermore, compared to the previous year, the questionnaire's internal consistency was improved upon and was rated at a high value of 0.895. It is expected that by employing the derived marine safety culture index and incorporating the improved questionnaire that reflects the requirements of marine experts and the people, the improved questionnaire will contribute to the establishment of policies for spreading knowledge regarding the marine safety culture.

• Journal of the Society of Disaster Information
• /
• v.16 no.1
• /
• pp.163-177
• /
• 2020

Purpose: While it is very important to maintain facilities recently, the introduction and its application of high technology in the facility maintenance industry has increased. It is necessary for high technology to secure reliability through the verification and certification system of diagnostic equipment to have an effective impact in the field, but there is difference between the industry's perspective and realistic level of technology apart from social demand for the system of the system. This paper dealt with the introduction of a verification and certification system for rational facility diagnostic equipment with the opinion survey on managers about the current situation. Method: Survey is carried out targeting managers in the maintenance and construction regarding the necessity and urgency of introducing a verification and certification system to promote the introduction and its application of high technology of diagnostic equipment and facility inspection. Also, the introduction to a verification and certification system was reviewed for advanced facility diagnostic equipment through foreign research about similar systems and comparative analysis of similar systems related to the certification of 21 domestic equipment. Result: It showed that, regarding the application of high technology, it is necessary for most managers to introduce high technology such as drones, robots, etc., in the maintenance industry, and when high technology is introduced, it will have a considerable effect in the field. On the other hand, the current technology level in Korea is relatively low, so it turned out to take a certain amount of time for the application of technology. Also, it was found that the management of reliable facility diagnostic equipment will be possible through the introduction of the verification and certification system for facility diagnosis equipment. Meanwhile, the survey is conducted on similar systems about foreign and domestic diagnosis and measuring equipment, etc., but there is no system to verify and certify equipment applied with high technology directly to facility diagnosis maintenance. However, because Japan has a system of verifying the performance of diagnostic equipment and South Korea has 21 similar inspection and diagnostic equipment certification systems among 186 certification systems, it is considered to be possible to design systems which utilize them. Conclusion: According to the managers' opinion, it seems that the introduction of the system supporting the application of 4th industrial technology for the equipment and the use of the equipment with high reliability has sufficient validity. However, because our high technology level is undervalued compared to the urgency, the system for checking high technology facilities and certifying diagnostic equipment should be to be implemented in form of escalation considering technical use and verification level. Apart from the introduction of the verification and certification system, it is necessary for special investment, support and efforts to promote advanced facility diagnostic equipment.

• Journal of the Korean Society for information Management
• /
• v.37 no.2
• /
• pp.251-284
• /
• 2020

As the use of information has emerged as the core of national competitiveness, major developed countries and the Korean government have realized the importance of data. They have pursued technical research and standard establishment for long-term preservation and continuously strived for systematic management and preservation of data. However, although various types of data are specified for the purpose of record management in the law, there is no specific method on how to collect, manage and preserve them, except standard electronic documents. In particular, management and preservation of huge datasets from the administrative information system have been strongly demanded above all. Any guidelines for datasets do not have been properly provided. After the framework for selecting preservation format must be prepared, the system can be supplemented and built. The framework considering the characteristics of the dataset should be specified more concretely, and empirical verification of the conversion and restoration for the dataset preservation format derived according to the selection criteria is necessary. Therefore, this study intends to propose a method for long-term preservation through empirical verification of the preservation format after deriving an evaluation the framework for the preservation format selection criteria considering the characteristics of the dataset.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.1
• /
• pp.108-117
• /
• 2016

In this paper, a portal system compatible with MRV regulation was designed to monitoring, reporting and verifying $CO_2$ emission and fuel consumption data from an international ship. A portal system supports monitoring and reporting task of international shipping companies and calculates national greenhouse gas inventory. EU MRV law, MRV discussions of IMO, responses of international shipping companies to ship energy efficiency and greenhouse gas regulation, and greenhouse gas statistics on international shipping were analyzed to drive portal system requirements. For ship energy efficiency and $CO_2$ emitted monitoring, a data collection module was designed based on on-board equipment, energy efficiency measuring device and navigation report. Data transfer module with easy management and minimized usage to transfer ship data to shore was designed. A portal system was designed to convert the collected data into the standard reporting format, perform monitoring, statical analysis, verification and auto report generation, and support national greenhouse gas inventory.

• Journal of Food Hygiene and Safety
• /
• v.33 no.1
• /
• pp.44-49
• /
• 2018

As generic health functional food items have been expanded, this research project has been conducted to prepare a scientific and systematic standardized analytical method of relevant food item and examine the suitability of the method for health/functional foods on sale. Total polyphenol was necessary for development and verification of standardized analytical method. The method exhibited high linearity in the tannic acid calibration curve ($r^2$ > 0.999) over concentrations of $5-50{\mu}g/mL$. The limits of detection and quantitation for tannic acid were $5{\mu}g/mL$ and $15{\mu}g/mL$, respectively, while tannic acid recovery was 102.3-112.4% with standard deviations of 0.8-3.2%. To verify the accuracy of the analytical method, the labeled amounts of purchased health functional foods were monitored. The recovery for tannic acid was 105.6% of the labeled amounts. Thus, the new method was suitable for all cases.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.12
• /
• pp.111-121
• /
• 2019

In the revised 2019 Guidelines for Facility Safety and Maintenance, the existing safety-oriented facility evaluations have expanded from performance evaluations to added durability and serviceability. This expansion reflects the life cycle of facilities and the service abilities of facilities, which are becoming a global issue. However, since the performance evaluation of facilities is linked to repairing and reinforcement, the related researches such as the correlation of each performance and the target performance related to the decision on priority are necessary. In this study, through the analysis of historical data of existing facility safety evaluation results centered on the retaining earth wall installed in domestic road facilities, the appropriate target performance was suggested for the maintenance of the facility based on the revised performance evaluation. Also, the performances on the actual two retaining walls were evaluated for example and analyzed the verification of the target performance. Besides, new indicators were presented to add serviceability to the performance evaluation of retaining earth walls consisting of safety and durability.

• Journal of Food Hygiene and Safety
• /
• v.23 no.2
• /
• pp.91-97
• /
• 2008

Kimchi is a representative traditional food in Korea and a type of vegetable product that is the unique complex lactic acid fermentation in the world. It can be considered as a unique fermented food generated by various flavors, which are not included in raw materials, that can be generated by mixing and fermenting various spices and seasonings, such as red pepper powder, garlic, ginger, and salted fish, added to Chinese cabbages. Functionalities in Kimchi have been approved through several studies and the probiotic function that is mainly based on lactic acid bacteria including their physical functions in its contents has also verified. Studies on the verification of the safety of Kimchi including its physiological functions have been conducted. In particular, the function of lactic acid bacteria, which is a caused of the fermentation of Kimchi. Although the lactic acid bacteria contributed to the fermentation of Kimchi is generated from raw and sub-materials, the lactic acid bacteria attached on Chinese cabbages has a major role in the process in which the fermentation temperature and dominant bacteria are also related to the process. The salt used in a salt pickling process inhibits the growth of the putrefactive and food poisoning bacteria included in the fermentation process of Kimchi and of other bacteria except for such lactic acid bacteria due to the lactic acid and several antimicrobial substances generated in the fermentation process, such as bacteriocin and hydrogen peroxide. In addition, the carbon dioxide gas caused by heterolactic acid bacteria contributes to the inhibition of aerobic bacteria. Furthermore, special ingredients included in sub-materials, such as garlic, ginger, and red pepper powder, contribute to the inhibition of putrefactive and food poisoning bacteria. The induction of the change in the intestinal bacteria as taking Kimchi have already verified. In conclusion, Kimchi has been approved as a safety food due to the fact that the inhibition of food poisoning bacteria occurs in the fermentation process of Kimchi and the extinction of such bacteria.