• 제목/요약/키워드: safety switch

검색결과 166건 처리시간 0.031초

컨베이어 사고 예방을 위한 풀 코드 스위치 적용기준 개선 (Improvement of Application Criteria of Pull Code Switch for Conveyor Accident Prevention)

  • 서재민;박지훈;백종배
    • 한국안전학회지
    • /
    • 제34권5호
    • /
    • pp.153-158
    • /
    • 2019
  • It is estimated that about 2,515 persons have been injured by conveyor for the past five years(2013 ~ 2017). Conveyors used in various industrial sites for transporting iron ore, coal, courier goods, etc., have various incidents such as a worker putting on or pulling a part of the body or work clothes on the driving part during maintenance. It is necessary for preventing similar accidents to conduct various researches. In order to propose the basis for revising laws and standards for the safety standards of the full cord switch to prevent conveyor accidents, this study compares Korea's Industrial Safety and Health Law (KISHL) with those of IEC, EN, Canada, and Australia. In addition, surveys of conveyor use plant and full cord switch domestic and foreign manufacturers was conducted. In this study, domestic and overseas related laws and technical standards compare and analyze to prevent conveyor accidents. In addition, we propose extension of safety certification for full code switch, establishment of safety inspection standard, and improvement of working method regulation through actual working condition investigation. It can be used as a basis for revising the occupational safety and health regulation and related notices, and thus contributing to enhancing the safe atmosphere of the conveyor business and improving the safety consciousness of the concerned persons.

Al 소재의 자동차용 Oil Pressure Switch의 신뢰도 분석에 관한 연구 (A Study on the Reliability Analysis of Al Oil Pressure Switch for Automobiles)

  • 조명호;김태훈;이광원
    • 한국안전학회지
    • /
    • 제24권6호
    • /
    • pp.150-156
    • /
    • 2009
  • The oil pressure switch(OPS) for automobile is very important part to prevent an overheated engine and other problems by checking the operation of an engine oil system and displaying oil signs on a dashboard. OPS is the part that receives various stress caused by temperature, vibration, and corrosion in an engine room. Regarding existing steel OPS cases, there occur field errors due to the rust, and much concern comes from the low anticorrosion caused by CR6+ Free according to the restrictions of heavy metals. Therefore, the study analyzed average life, the failure rate, and reliability through the tests of performance according to temperature changes, mechanical strength, and run-test in order to confirm if the use of the oil pressure switch with Al of anti-corrosion can improves the reliability, instead of the existing steel products.

Z-source 직류 차단기의 기계식 스위치 적용을 위한 최적화 설계 (Optimization Design for the Use of Mechanical Switch in Z-source DC Circuit Breaker)

  • 이현승;이건아
    • 한국안전학회지
    • /
    • 제37권1호
    • /
    • pp.12-19
    • /
    • 2022
  • Circuit breakers are a crucial factor in ensuring the safety of a Direct Current (DC) grid. One type of DC circuit breaker, the Z-source DC circuit breaker (ZCB), uses a thyristor, which is a type of semiconductor switch. In the event of a fault in the circuit, the ZCB isolates the fault by generating a zero crossing current in the thyristor. The thyristor quickly and actively isolates the fault while generating a zero crossing current, but thyristor switch cannot control turn-off and the allowable current is lower than the current of the mechanical switch. Therefore, it is best to use a mechanical switch with a high allowable current capacity that is capable of on/off control. Due to the slow reaction time of mechanical switches, they may not isolate the fault during the zero crossing current time interval created by the existing circuit. In this case, the zero crossing current time can be increased by using the property that hinders the rapid change in the current of the inductor. This paper will explore whether adding system inductance to increase the zero crossing current time interval is a solution to this problem. The simulation of changing inductor and capacitor (LC) of the circuit is repeated to find an optimal change in the zero crossing current time according to the LC change and provides an inductor and capacitor range optimized for a specific load. The inductor and capacitor range are expected to provide optimization information in the form LC values for future applications of ZCB's using a mechanical switch.

저전력 및 설비간략화를 위한 선로전환기용 융설장치 설계 (Design of Improved Switch Point Heating System for Low Power and Simplified Equipment)

  • 장동완;전태현
    • 조명전기설비학회논문지
    • /
    • 제27권1호
    • /
    • pp.61-67
    • /
    • 2013
  • The turnout point system is installed to separate the main rail track from other tracks in rail load stations. It is also important to set up the switch point system to change the direction of the turnout point, to lead and change the direction of tracks. The switch point system can be negatively affected by heavy snow during winter seasons which can cause critical safety problems. Furthermore, the maintenance and repair of the conventional system is prohibitively expensive due to its complexity and high probability of failure. In this paper, an efficient switch point system is proposed which simplifies the equipment structure and lowers the cost for maintenance and repair, while improving safety and performance of the rail road system.

지중 배전선로용 개폐기 복합조작봉 개발 (Development of Hook Stick for PAD Switch in Underground Distribution Lines)

  • 제충모;정용운;조호령;유근양
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
    • /
    • pp.1053-1055
    • /
    • 2005
  • At the moment, the operation methods for pad switch are different due to the differences of the manufacturer and the types or ratings of pad switches; accordingly, various types of the operation tools are required for the operation of pad switch. Sometimes, the operator uses conductive tool made of metal, or there is no sufficient space around the pad switch for operation and these kinds of problems are related with the potential safety accidents of the operators. Therefore, to solve these problems, new universal operation tool for pad switch, which only needs the change of operation head for various types of pad switches, has been developed. With this new tool, durability and safety of the operator can be achieve.

  • PDF

상전도흡인식 도시형 자기부상열차의 분기기 주행안전성 연구 (Study on Running Safety of EMS-Type Maglev Vehicle Traveling over a Switching System)

  • 한종부;이종민;한형석;김성수;양석조;김기정
    • 대한기계학회논문집A
    • /
    • 제38권11호
    • /
    • pp.1309-1315
    • /
    • 2014
  • 자기부상열차에 있어서 분기기는 차량이 가이드레일과 접촉 없이 안전하게 노선을 변경할 수 있도록 설계돼야 한다. 특히, 별도의 안내 전자석이 없이 하나의 U-형 전자석으로 부상력과 안내력을 동시에 얻는 중저속 상전도흡인식 자기부상열차에 있어서는 분기기 통과시 안전성에 대한 검토가 요구된다. 이 방식에서는 안내력을 능동적으로 제어하지 않기 때문에 작은 곡률 반경이면서도 다수의 직선을 연결하여 곡선을 형성하는 관절형 분기기 통과시 전자석의 횡공극이 과도하게 발생하여 가이드레일과 기계적 접촉을 일으킬 수 있기 때문이다. 본 논문에서는 개발 중인 관절식 분기기에서 차량의 주행안전성 향상을 위하여 관절식 분기기의 주 설계 변수의 안전성에의 영향을 분석하는데 목적이 있다. 그를 통하여 분기기에서의 주행안전성을 향상하고자 한다. 이를 수행하기 위하여 2 량 1 편성으로 구성된 3 차원 전체차량 다물체 동역학 모델의 적용이 제안된다. 제안된 모델을 이용하여 분기기 통과시의 주행안전성척도 중의 하나의 횡공극 시뮬레이션이 이루어진다. 분석되는 설계 변수들은 단경간 거더의 길이와 굴절각, 끝단 고정궤도 중심 사이의 거리, 거더의 수량이다. 이러한 설계 변수들의 영향을 분석하여 안전성 향상을 위한 분기기 설계 방향을 제시한다.

PROLONG THE SERVICE LIFE OF SWITCH RAIL BY IMPROVED INDUCTION HEAT TREATMENT

  • Zhan, Xinwei;Wang, Shuqing
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 추계학술대회 논문집
    • /
    • pp.1946-1950
    • /
    • 2007
  • Switch rail is a very important part on the railway track, which not only accounts for the safety of the passing trains but also greatly influences the speed of the train. The higher the speed and the loads of the train the more it demands on the properties of the switch rail. Research shows that the higher mechanical properties of switch rail the longer the service life. Induction heat treatment is a good way of improving the mechanical properties of metallic materials. But the switch rail's section area changes gradually across the lengthways, which is difficult for induction heating especially for the small section. And the mechanical property of small section of the switch rail is the most important for its service life. The induction heat treatment used past always brings the low hardness on small section which can cause low service life of switch for wearing, or too high hardness because of martensite microstructure which can cause the shelling or even breaking of the switch rail. To prolong the service life of switch rail by higher mechanical properties, we researched the improved induction heat treatment for switch rail by adjusting speed of heating, and adopting compressed air cooling. The results showed that switch rail obtain almost the same high hardness across the length way after the improved induction heat treatment, which is very helpful to extend the service life of switch rail.

  • PDF

Development of the Limit Switch Box for a Ship and Its Performance Evaluation against Salt Water

  • Lee, Seung-Heui;Go, Seok-Jo;Lee, Min-Cheol;Kim, Chang-Dong
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2005년도 ICCAS
    • /
    • pp.1334-1338
    • /
    • 2005
  • A limit switch box is used for an indicator of a valve actuator. This device indicates an opening and closing of a valve or a throttle in the valve actuator. In a ship, equipments require safety and robustness because of a rough environment and a specific condition during a voyage. However, the limit switch box has been used in an indoor environment generally. This study developed a new limit switch box which can be used at an outdoor environment. This study designed the new limit switch box. The housing of the limit switch box was made by an aluminum die cast method with surface painting after anodizing or chromate coating. In order to evaluate the endurance of the housing, the endurance tests against salt water have been conducted. Experiment results showed that the proposed device provides a reliable performance against salt water.

  • PDF

도시형 자기부상열차 시저스분기기 개발현황과 성능시험결과 (Development and Performance Test Results of a Segmented Scissors Type Switch for the Urban Maglev)

  • 이종민;박도영;한형석;김창현
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
    • /
    • pp.3180-3186
    • /
    • 2011
  • A segmented scissors type switch has been developed for the urban transit maglev demonstration line to be commercialized near Incheon International Airport in 2013. Based on the design of the previous segmented 3-way switch, the scissors switch is composed of four segmented 2-way switches up/down and left/right and a turn table in the mid point. The main function of the scissors switch is to change the running direction of the train at end terminals. The developed scissors switch is planned to be installed in front of the 102 station, which has a side platform, of the demonstration line. The total length of the switch is 65m and the distance between the up and down track centerlines is 6m. The 2-way switches and turn table are made of steel box type beams, and have their own driving unit, locking unit, control unit, levitation and propulsion rails, and so on. Installed in the factory, a 100,000-cycle continuous operation test was carried out after manual and automatic test operations. The applicapability of the developed switch was verified through the measurements of the linearity of the track after repetitive operations, the mechanical operation noise, the load of the main driving motor, the safety of the control panel, the natural frequency of the girder, the deformation of the girder, and so on.

  • PDF

방식형 리미트 스위치 박스의 개발에 관한 연구 (A Study on the Development of the Limit Switch Box for Corrosion Protection)

  • 이승희;고석조;이민철;김창동
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 춘계학술대회 논문집
    • /
    • pp.836-839
    • /
    • 2005
  • A limit switch box is used for a indicator of a valve actuator. This device indicates an opening and closing of a valve or throttle in a valve actuator. In a ship, equipments are required safety and robustness because of a rough environment and a specific condition during a voyage. However, the limit switch box is used in an indoor environment generally. In order to evaluate the endurance of the limit switch box used in an indoor environment, the endurance tests against salt water have been conducted. Experiment results showed that the limit switch box was corroded severely. Thus, this study developed a new limit switch box which can be used at an outdoor environment. The housing of the developed limit switch box was made by an stainless steel to prevent corrosion.

  • PDF