• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.2
• /
• pp.66-70
• /
• 2002

If we were reviewing safety standards in Korean businesses today we would find that conglomerates have a low rate of workmens accidents largely due to safety supervision being practiced on site. Unlike small businesses which experience more than 50% of the total workmens accidents with many conventional accidents occurring repeatedly. This research is presenting a course that proves safety and health programs are the most effective positive factor to increase a companys prosperity. This model research also presents basic causes of industrial accidents and has made counter proposals by trial modeling.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.2
• /
• pp.65-71
• /
• 2001

Comparing the rate of accident in 1999 with 1998, that has been increased about 0.06%. The 56 percentage of industrial accident had been occurred by new employer, who has been worked less than 1 year, in 1999, therefore safety training and education is required for those new employer. This study is present the analysis and investigation of safety training and educational situation and consider a counterplan.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1222-1230
• /
• 2020

The corrosion rates of the reactor pressure vessel materials of SA508 Grade 3 were measured using a weight loss method in aerated boric acid solutions to simulate the evaporation of leaked PWR primary water in an ambient environment. The corrosion behavior and products were examined using X-ray diffraction and electron microscopy. SA508 showed typical general corrosion characteristics. The corrosion rate increased steadily as the boron concentration was increased. As the immersion time elapsed, the corrosion rate slowly or rapidly decreased according to the oxidation reaction of iron. The corrosion rate showed a complicated pattern depending on the temperature; it increased gradually and then rapidly decreased again when reaching a certain transition temperature. The corrosion products of SA508 were found to be FeO(OH), Fe₂O₃, and Fe₃O₄. As the boron concentration decreased and the temperature was increased, the formation of Fe₃O₄ was more favorable as compared to the formation of FeO(OH) and Fe₂O₃. Consequently, the changes of the corrosion rate and behavior were closely related to the oxidation reaction of iron on the surface. The corrosive damage to SA508 appears to be most severe when the oxidation reaction is such that Fe₂O₃ forms as a corrosion product.

• Journal of Korean Clinical Nursing Research
• /
• v.28 no.3
• /
• pp.242-250
• /
• 2022

Purpose: This study was conducted to evaluate the performance following the application of the pilot program for the education nurse system of the Ministry of Health and Welfare in a medical institution. Methods: This study was employed a non-homogeneous comparative group design by comparing new nurses who entered the medical institution after the pilot project from December 2019 to April 2020 with new nurses who entered before the pilot project during the same period. Satisfaction, academic achievement, job adaptation, personal turnover within one year, and patient safety incident rate were investigated as performance indicators. Results: After the pilot project, the overall satisfaction among new nurses, preceptors, and fellow nurses increased, but there were no significant changes in academic achievement and job adaptation in new nurses. The personal turnover rate decreased from 15.6% to 9.1%, and the patient safety incident rate also decreased from 26.3% to 15.7%. Also, the preceptor overtime also decreased from 3.67 to 0.66 hours. Conclusion: The performance of the pilot project for the education nurse system was related to improvements in satisfaction, turnover rate of new nurses, patient safety incident rate, and preceptor overtime. Above all long-term monitoring of each performance indicator is necessary through the continuation of the education nurse system of the Ministry of Health and Welfare.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.4
• /
• pp.23-29
• /
• 2010

There are two kind of method to perform a safety management in industrial field. One is a management by safety manager employed in company and another one is safety management by acting agency. In case of the company that managed by the acting agency dose not coincide with the state of company and safety management performance because of the safety management is carry out by periodically. Therefore it is considered that the sufficient safety management is difficult. And a company that employ a safety manager also show a low level of safety management compare with the advanced country in view of safety and health. From the statistics of accident rate of the company, it is necessary that an improved safety management through the studying and analysing a coverall matters for the company that managed by acting company.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.3
• /
• pp.273-278
• /
• 2016

This study makes a relative comparison of the results of tensile test and quasi-static analysis using AGL(Adjuster Guide Loop) model that plays a role in adjusting the height of shoulder belt, of the components of the vehicle seatbelt system and attempts to propose a method of reducing the error rate of the quasi-static analysis technique effectively. This study selects two major factors affecting the result of an analysis, draws the result of analysis through the method of experimental design, one of the statistical techniques and understands the contribution rate of the major factors affecting the result of the analysis through ANOVA(Analysis of Variance).

• Journal of the Korean Society of Safety
• /
• v.32 no.3
• /
• pp.8-14
• /
• 2017

This study examined the combustion and thermal characteristics of imported woods for building materials in Korea. Wooden specimens were confirmed by a cone calorimeter according to the KS F ISO 5660-1 standard. The combustion properties of the wooden specimens were measured in terms of the heat release rate (HRR), total heat released (THR), mass lose rate (MLR), and ignition time (time to ignition; TTI). The optical microscope was used for determine the anatomical characteristics of wood pit and structure. Also, the thermal properties were measured by thermogravimetric analysis (TGA) to determine the thermal stability of wooden specimens. The result of this experiment would be useful for fundamentals of guiding the combustion properties and thermal stability using wood application.

• Safety and Health at Work
• /
• v.3 no.2
• /
• pp.104-109
• /
• 2012

Singapore, an island republic of over 5 million inhabitants, has 3.1 million workers. Most are employed in the service, finance and tourist/transport industry. Significant numbers work in manufacturing, construction and heavy industry. Following a series of construction and shipyard accidents with multiple deaths in 2004, the government announced its intention to reduce workplace fatalities from 4.9 to 2.5 per 100,000 by 2015. There was strong political will to achieve this target. The strategic approaches were to build workplace safety and health (WSH) capabilities; implement legislative changes with enforcement; promote benefits of WSH and recognize best practices, and enhance partnership with stakeholders. The anticipated outcomes were to reduce workplace fatality and injury rates; have WSH as an integral part of business; and establish a progressive and pervasive WSH culture. With these measures, the workplace fatality rate declined from 4.9/100,000 in 2004, to 2.2/100,000 in 2010. However, other confounding factors could also account for this decline, and have to be considered. The next target, announced by Singapore's Prime Minister in 2008, is to further reduce the workplace fatality rate to 1.8/100,000 by 2018, and to have "one of the best workplace safety records in the world".

• Journal of the Korean Society of Safety
• /
• v.20 no.4 s.72
• /
• pp.40-45
• /
• 2005

The principal actions of a flame retardant are to decrease or prevent the formation of volatile products and increase the formation of char layer. Use of flame retardant additives can decrease the overall fire hazard of the product containing them thus leading to an increase in overall fire safety. Although several flame retardants have been developed for use in polymers, many of these are known to increase the amount of smoke and toxic gases generated by them. This paper present a new flame retardant using metal addition flame retardant. For this study, the experiments of flame retardancy conducted are as follows : burning ratio, weight loss rate using TGA-DTA, the measurement of LOI and char yield. And smoke mass concentration and CO yield were measured. The metal addition flame retardant reduced burning ratio and weight loss rate, increased the LOI and yield of char formation with decreased smoke mass concentration and CO yield.

• Journal of the Korean Institute of Gas
• /
• v.7 no.1 s.18
• /
• pp.10-18
• /
• 2003

Consequence model has been suggested to evaluate consequence of city gas accident considering actual situation. Through event tree analysis(ETA), probable accidents were summarized and listed. Then release rate was calculated both sonic and subsonic conditions. Among city gas accidents, fire damage is the dominant one and mainly discussed; fatality, burning injury, and damage to building were estimated using the consequence model suggested. With an appropriate conditions, calculating total cost by accident was suggested.