• Journal of the Korea Institute of Building Construction
• /
• v.11 no.1
• /
• pp.29-34
• /
• 2011

Since the study of building performance design was first undertaken by Building Research Station in 1930s, the results of such study has been reported from many parts of the world, building construction codes and standards have been revised based on performance in advanced nations as well in Korea, and various performance certification systems are in operation. The purpose of this study is to build a database of performance certification systems to investigate the co-relationship of various test methods related to the same test items. As test methods for case study, we selected test methods involving collision of the human body. Through analysis of Critical fall height test of EN 1177 and Head Model test of JIS A 6519 about 8 species of floor test-bodies, it was found that there are limits of application in terms of the depth and strength of cushion. Furthermore, although the measured physical parameters are the same, when the co-relationship between test methods is uncertain, the various physical parameters may not be compatible with the results.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.4
• /
• pp.434-441
• /
• 1996

This study was conducted to clarify the degradation pattern, safety evaluation and penetration ratio of benomyl and bitertanol to apple used as postharvest fungicides during CA(controlled atmosphere) and cold storage. In CA storage, the degradation of benomyl and bitertanol in stored apple was slow at the early stage, while that in cold storage was, on the contrary, faster at the early stage. The initial concentrations of benomyl and bitertanol in apples applied at the standard application concentrations were 2.24 and 1.54mg/kg, respectively, and their residual amounts were below the maximum residue limits, 1mg/kg at 135 and 96 days in CA storage, 115 and 70 days in cold storage, respectively. The half-lives of benomyl and bitertanol in stored apples were 124 and 130 days in CA storage, 101 and 111 days in the cold storage, respectively, indicating that the degradation was faster in cold storage than in CA storage. The residual amount of benomyl and bitertanol in stored apples was retained more in peels than in pulps of apples.

• Journal of Korean Society of Transportation
• /
• v.23 no.4 s.82
• /
• pp.47-55
• /
• 2005

In recent years, the rapid growth of vehicles have increased traffic crashes. Since they can cause the economic losses and have put the life qualify in danger, there should be numerous efforts to reduce traffic crashes. To reduce traffic crashes, this research seeks to improve the safety of intersections by analysing causations of injury severity with Ordered Probability Model. This research applied the Ordered Probit Model, which assumes that ${\epsilon}_i$(random error) is normally distributed, for model calibration and used $p^2$ (likelihood ratio) and $x^2$ (Chi-square) for model selection. The results show that minor road traffic, heavy vehicle rates, major and minor right-turn rates, presence of lightings, speed limits, instructive line for left-turn traffic are significant factors affecting crash severities at signalized intersections.

• Journal of Chest Surgery
• /
• v.10 no.2
• /
• pp.299-314
• /
• 1977

Clinical experience on 16 cases of open heart surgery under the extracorporeal circulation with mild or moderate hypothermia and partial hemodilution technique at the National Medical Center during the period from June 1976 to October 1977. Nine of sixteen were congenital heart disease and seven were acquired heart disease. The age of the patient ranged between 6 and 48 years. The body weight varied from 18.5kg to 60kg and body surface area 0. 79-1.70m2. The average priming volume of pump oxygenator was 2080 ml, which was consisted fresh ACD blood, buffered Hartmann`s solution, Mannitol, 50% dextrose in water and Vit. C. The average hemodilution rate was 27%. The average flow 2.3 L/min/m2 or 80 ml/min and the duration of perfusion varied from 31 min to 270 min with average of 107 min. The perfusion was carried out under the mild or moderate hypothermia using core cooling alone in 10 cases, core cooling and local myocardial cooling with $0-4^{\circ}C$ physiologic saline in 2 cases. From a hemodynamic point of view, the blood pressure dropped down around 80 mmHg after the initiation of perfusion follwed by increase to safety level and stable during the perfusion. The central venous pressure remained within normal limits. In most cases, hemoglobin and hematocrit decreased during and after the perfusion. Hemogiobin level was decreased, average of 20.6 %, hematocrit 18.6%, pletelets 55% postoperatively. Plasma hemoglobin increased moderately, from preperfusion average valve of 7.79 mg % to post-perfusion value of 54.7 mg %. Electrolytes changes during cardiopulmonary bypass showed definite hypokalemia but changes of Na, Ca were not definite. Arterial blood gas analysis during cardiopulmonary bypass suggested that the metabolic acidosis which was accompanied by respiratory alkalosis which was corrected postoperatively. As the opera tive complication, transient hemoglobinuria in 4 cases and neurological signs in 2 cases were all cured. There were 2 death cases and operative mortality rate was 12.5%.

• Journal of Environmental Health Sciences
• /
• v.36 no.6
• /
• pp.472-479
• /
• 2010

The purpose of this study was to investigate the concentration of indoor air pollutants at 63 elementary schools, 41 middle schools and 51 high schools in Ulsan from the beginning of May to the end of December, 2008. To assess the indoor air quality of the various classrooms, the 8 indoor air pollutants such as $CO_2$, CO, $NO_2$, $O_3$, $PM_{10}$, TVOCs, HCHO and TBC were measured and analyzed. The mean concentrations of $PM_{10}$ and TBC in the elementary schools were significantly higher than those of middle and high schools (p < 0.01). For the HCHO, the multi-use practice rooms showed an average 1.5 times higher than general classrooms. In schools located in urban areas, the concentrations of CO, $O_3$, $PM_{10}$, HCHO and TBC were lower than in the vicinity of industrial complexes. The exceeding rate of the school air quality maintenance limits in the 6 air pollutants by law were 6.7%, 3.5%, 1.7%, 18.2%, 13.0% and 18.4% for $CO_2$, $NO_2$, $O_3$, $PM_{10}$, HCHO and TBC, respectively. Based on these results $PM_{10}$ and TBC have to be in the order of priority of need to improve the classroom air quality in elementary school of Ulsan.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.2
• /
• pp.83-90
• /
• 2010

As a reinforced fabric, asbestos has been utilized as a fire-resistant material as it has a superior flexural stiffness and heat resistance up to $1500^{\circ}C$. However, due to its harmfulness, its use has been prohibited recently and the even the installed asbestos materials are being repaired or supplemented if there is a concern about flying. Asbestos is mainly used for construction panels as a reinforced fabric and coating materials to ensure the fire-resistance of steel frames. Asbestos was used as fire-resistant materials for steel frames until 1991 and then prohibited as Act on Industrial Safety and Health limits the concentration of asbestos in the air. Classified as a designated waste according to Act on Waste Control, asbestos must be buried if there is no possibility of flying (panel-type materials) or cement-solidified and then buried if there is a possibility of flying (spray coating material) In general, it is required that a new waste landfill include a certain landfill facility for designated waste, but in reality there is an absolute storage of landfill facilities for designated waste as they only install facilities of the size required by the regulations. This could result in the 2nd environmental pollution as they cannot process asbestos wastes which will be generated in large volume in the future. This study explores a method that melts asbestos wastes at $700^{\circ}C$ rather than cement-solidifying the waste asbestos from construction sites, especially asbestos-containing spray coating. The study results showed that there was no change in the composition and shape even though asbestos wastes was melted at $1300^{\circ}C$, but there was a change for the specimen which was process in advance for low temperature melting and then melt at $900^{\circ}C$.

• Journal of the HCI Society of Korea
• /
• v.13 no.1
• /
• pp.21-28
• /
• 2018

The rapid increase of Sinlge-person household and the increase in the use of smart devices necessitate the context analysis of Sinlge-person household and specific design direction for Sinlge-person household products. Previous studies have analyzed the overall context of smart devices without distinguishing between Sinlge-person household and a household. However, since the number of family members, age distribution, and residential space are different in the case of Sinlge-person household, it is necessary to analyze the different behaviors of smart devices. Therefore, this study limits the use environment of smart device of Single-person household to the scope of investigation, and based on the theoretical background, defines the existing comprehensive context based on user's situation that lasts for a certain interval. For the concrete and empirical research results, Consolidated Flow Model was constructed through Contextual Task through user research. This shows the interaction characteristics such as the guarantee of physical space, efficiency, lifestyle reflection, and safety assurance of Single-person household.

• Tunnel and Underground Space
• /
• v.16 no.4 s.63
• /
• pp.296-306
• /
• 2006

It is difficult to solve problems regarding the adjustment on demand and supply of LNG due to seasonal variations of domestic demand of LNG, a discordance among import pattern and limits of storage facilities and so on. Also, there may be instability in LNG supply due to chances of accidents at LNG producing areas. Therefore, it is very important to secure large LNG storage facilities and to stabilize LNG supply management on a long term basis. The objective of this study is to examine the real-scale applicability of a lined underground rock storage system, which have been verified by a successful operation of the Daejeon LNG pilot plant. The new technology has many advantages of better economy, safety and environment protection, for above-ground and in-ground storage systems. The results of this study may promote the first ever real scale underground LNG storage system in a rock cavern.

• Journal of environmental and Sanitary engineering
• /
• v.19 no.3 s.53
• /
• pp.65-70
• /
• 2004

This study was peformed to survey and evaluate contents of Pb and Cd in colored plastic kitchenwares by Korea Food Sanitation Act. The tested samples were 160 products(32 PE, 65 PP, 10 PS, 18 ABS and 35 MF) in a local market. The Pb and Cd contents range in the samples were $ND\~357.1mg/kg\;and\;ND\~376.6mg/kg$. Pb contents in 6 samples(1 PE, 1 PP, 2 PS and 2 MF) and Cd contents of 2 samples(1 PE and 1 ABS) were above the legal limits. Among the illegal smples, Pb contents were 140.8mg/kg, 283.4mg/kg, 134.0mg/kg, 329.2mg/kg, 357.1mg/kg and 218.3mg/kg, respectively and Cd contents were 123.1mg/kg and 376.6mg/kg. Pb and Cd in various food simulants were not detected in migration test for illegal samples. Simulants were tested at $25^{\circ}C\;and\;60^{\circ}C$ for n-heptane and $4\%$ acetic acid, and $60^{\circ}C\;and\;95^{\circ}C$ for water.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.498-498
• /
• 2013

Atmospheric Pressure Plasmas have pioneered a new field of plasma for biomedical application bridging plasma physics and biology. Biological and medical applications of plasmas have attracted considerable attention due to promising applications in medicine such as electro-surgery, dentistry, skin care and sterilization of heat-sensitive medical instruments [1]. Traditional approaches using electronic devices have limits in heating, high voltage shock, and high current shock for patients. It is a great demand for plasma medical industrial acceptance that the plasma generation device should be compact, inexpensive, and safe for patients. Microwave-excited micro-plasma has the highest feasibility compared with other types of plasma sources since it has the advantages of low power, low voltage, safety from high-voltage shock, electromagnetic compatibility, and long lifetime due to the low energy of striking ions [2]. Recent experiment [2] shows three-log reduction within 180-s treatment of S. mutans with a low-power palm-size microwave power module for biomedical application. Experiments using microwave plasma are discussed. This low-power palm-size microwave power module board includes a power amplifier (PA) chip, a phase locked loop (PLL) chip, and an impedance matching network. As it has been a success, more compact-size module is needed for the portability of microwave devices and for the various medical applications of microwave plasma source. For the plasma generator, a 1.35-GHz coaxial transmission line resonator (CTLR) [3] is used. The way of reducing the size and enhancing the performances of the module is examined.