• Proceedings of the Safety Management and Science Conference
• /
• 2004.05a
• /
• pp.5-8
• /
• 2004

Domestic city gas is supplying in an about 10 million household on present 34 city gas companies because is begun to supply regularly after two 1980 years middle. But, result that focus on city gas supply spread and stable supply for supply area and neglects about safety problem, hundreds casualties such as Ahyun explosion accident and Deagu city gas explosion accident were reached in situation that occurred large size calamity occurs it is dizzliness. In the case of advanced nation, can see that accomplish system and progress that in technology after experience major accident. Therefore, grasp problem investigating safety actual conditions for city gas institution and study about solvable plan is required this. Also, must guide reform and level elevation of a domestic company safety technology through induction and development of safety technology that is suitable in supply, domestic real condition etc. Must help in power positivity that is full text executing high-quality safety education about step High firing mechanism safety technology than present safety education.

• Journal of the Korean Society of Safety
• /
• v.20 no.3 s.71
• /
• pp.180-187
• /
• 2005

The purpose of this study is to investigate safety consciousness of seafares'. The subjects were 437 seafaes' who took a safety education course in Korea Institute of Maritime and Fisheries Technology. This questionnaire was focused on finding the basic data for prevention of industrial accidents, and getting the public opinions and proposals of seafares'. The results obtained by this study are as follows : The average score of safety consciousness for seafares' were 68.82. Current position level of education navigation area classification of ships, ship size, ship age showed significant difference in statistics(p<0.01). Based on these results, this research pointed out the need to review the training manual, development of educational programs, improvement of facilities to improve safety education of ship, etc.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.132-139
• /
• 2011

ATP(Automatic Train Protection) system in railroad signalling system is on-board signalling system which is controlled by train control information such as location and speed of trains. Safety is ensured by transmitting the train control information between on-board and wayside device in the ATP system. When an engineer disregards the speed limit on a tachometer, the train is automatically stopped by the on-board device. Recently, the studies of increasing speed of the train have been developed. Eurobalise in ERTMS/ETCS system is used in case that speed of trains is up to 500[km/h]. A study of safety braking distance is needed by increasing the speed of train in the ATP system. Train data and track data are required to calculate the safety braking distance. The train data includes formations of trains, length of trains, service brake and emergency brake etc. Also, the track data includes slope of track, curve of track, length of track, speed limit etc. In this paper, the speed profile is computed by analyzing the train and track data in the ATP system. It is demonstrated by applying to subway line 2 in Seoulmetro through the on-site test.

• Safety and Health at Work
• /
• v.7 no.4
• /
• pp.284-292
• /
• 2016

Background: In Ghana, fire incidents have become a regular occurrence, with thousands of lives and millions of dollars lost every year. Hardly a day passes without news of a fire outbreak in some part of Ghana, causing fear and panic among the people. This generates much discussion centering on rumors relating to politics, sabotage, misfortune, religious differences, etc. This article seeks to discuss the trend of fire incidents occurring in Ghana from 2000 to 2013 and the different ways to prevent these incidents. Methods: The pattern of fire incidence in Ghana as a whole as well as in each region is discussed. The study took into consideration the causes, mechanisms, as well as preventive measures against the fire menace. Data were obtained from the head office of Ghana's national fire service. Results: It was noticed that in general the rate of fire incidence increased each year. This increase was attributed to several factors: rate of population growth and industrialization, unstable electricity, urbanization, negligence, illegal electrical connection, etc. The cause of fire was categorized into domestic, industrial, vehicular, institutional, electrical, commercial, bush, and others. Among these causes, domestic fire accounted for 41% of the total number of fire incidents in the country. Conclusion: Finally, this study presents several recommendations to help prevent and mitigate fire incidents in Ghana.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.3
• /
• pp.275-278
• /
• 2008

It has been issued that the necessity of Live line work for 765kV vertical double circuit six bundle conductors transmission line when the characteristics of transmission line, the composition of T/L and near the T/L circumstances etc. Others are considered. The Barehand method of UHV T/L is extremely dangerous work and especially it is directly related with lineman life so it is very dangerous. It should be performed several technology developments for live-line work on the UHV T/L, that should be considered such as the electrical influence on workers near the T/L, development of live-line facilities, guarantee of safety, the technical rules of live-line work, the safe method of live-line work and etc. In order to maintain the 765kV transmission lines safely by barehand work, first of all, we should know the analysis of electrical safety level test in live-line work at 765kV vertical double circuit six bundle conductors on the suspension string tower type.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.3
• /
• pp.35-42
• /
• 2017

Process Hazard Analysis(PHA) have been performed for a risk management of process (petrochemical) industry for nearly 50 years. There are many PHA methods for application in the process industry, Hazop Study method has been recognized as a good method used typically in most of phase of process plant. And also there was inconvenient opinion that Hazop Study is too resource (man power, time etc.) consuming comparing its result performance (a quality of recommendations) for a good operating and existing plant. In this study, two types of PHA method - checklist and K-PSR - were performed respectively for a new para-xylene(PX)plant and 30 year old PX plant. Past history and experience of incident, operation, maintenance and so on are very important in PHA by those two methods. The higher effectiveness were realized in PHA by a checklist and K-PSR Method than prior Hazop study. And also some suggestions including PHA cycle determination, RBPS application, Follow-up plan of PHA result etc. were proposed about PHA improvement measures for a best risk management.

• Journal of the Korean Society of Safety
• /
• v.27 no.4
• /
• pp.13-19
• /
• 2012

The purpose of this study is to extract the major factors related to the deterioration mechanism of white organic light-emitting diodes(WOLED) by performing accelerated testing of temperature, voltage, time, etc., and to develop an accelerated life test(ALT) model. The measurement results of the brightness of the WOLED exhibited that their average brightness tended to increase as the operating voltage increased and that the half-life period of the brightness appeared after approximately 400 hours when the operating voltage was 20V and the ambient temperature was $85^{\circ}C$. It could be seen that although the WOLED showed comparatively the same brightness when the initial acceleration began after the operating voltage was applied to it, its brightness changed excessively after the WOLED's thermal storage had been made. In addition, it was observed that the half-life period was reduced as the ambient temperature and applied voltage increased. The strength of the WOLED which had been maintained in the range of visible light at the maximum load was reduced by the deterioration of the organic light emitting material due to the influence of the operating voltage and temperature, and the reduction of emitted light was small at low voltage and temperature. It could be seen that the failure of the WOLED during the ALT was caused by wear due to load accumulation over time, and that Weibull distribution was appropriate for the life distribution and acceleration was established between test conditions. From the WOLED analysis, it is thought that factors influencing the brightness deterioration are voltage, temperature, etc., and that comprehensive analysis considering discharge control, dielectric tangent margin, etc., would further increase the reliability.

• The Journal of Fisheries Business Administration
• /
• v.40 no.2
• /
• pp.1-25
• /
• 2009

The major part of non-commercial food service is food service for school which has no any objective quality standards. Each school has different standard when they buy seafood for SFS(School Food Service). The research purpose is whether or not the extrinsic cues of the seafood such as price, the source origin, company image, safety standards, etc or the intrinsic cues such as fishy smell, the hardiness of fish meat, others have any effect on the seafood evaluation when school nutritionist purchase it, for more objective basis. The research method is distributing questionnaire survey through e-mail or directly visiting the schools from October 30 to November 9, 2007. The questionnaire was distributed to 70 nutritionists of food service for elementary school in Busan. Total 50 questionnaires are used as data in the statistical analysis using SPSS package software. The research results are; First, there is interaction effect between the extrinsic and intrinsic cues of seafood for SFS. That is when the school nutritionist valued on intrinsic cues of seafood such as a fishy smell, the hardiness of fish meat and etc influence on the extrinsic cues such as price, source origin, reliable circulation process, HACCP application, etc. Second, the extrinsic cues of the seafood give no effect on perceived quality. Since seafood for SFS are heavy buying, prearrangement contract and most of them using pre-treated frozen aquatics. Third, the intrinsic cues of the seafood give no effect on perceived quality. The extrinsic cues consist of 5 parts namely "opening about quality", "source origin", "company image", "safety/standards" and "price/package". However, "safety/standard" was the only affecting factor to perceive quality. The reason is that in fact they have no standards or any document proving the quality of the seafood unless safety standards factor. Last, the perceived quality is an important factor for perceived value and purchase intention. It is showed that there is a path to form a willing to buy through the perceived value after school nutritionist recognizes the perceived quality.

• Journal of the Korean Society of Safety
• /
• v.26 no.4
• /
• pp.41-46
• /
• 2011

The purpose of this paper is to analyze the causes of accidents related to the 3 phase 170 kV gas insulated switchgear of a power system collected from accident sites to secure data for the prevention of similar accidents and provide important points of view regarding diagnosis for the prevention of accidents involving gas insulated switchgears. The analysis results of the causes of accidents involving gas insulated switchgears showed deformation of the manipulation lever installed at the S-phase, disconnection of the insulation rod connection, melting of the upper conductor, a damaged tulip, damage to the lower spacer and the spacer at the breaker, etc. It is believed from this result that the potential for accidents has expanded due to accumulated energy as a result of repeated deterioration. The carbonization depth of a GIS was formed near the screw (T2, T3) used to secure the lower pole of the S-phase tulip. It is not known what has caused the screws to be extruded and melted. However, it is thought that an unbalanced electromagnetic force, micro-discharge, surface discharge, etc., have occurred at that point. In addition, even though 16 years have passed since its installation, there was no installation defect, act of arson, accidental fire, etc. General periodical inspection and diagnosis failed to find the factors causing the accidents. As a system contained in a closed metal container, it has a high risk factor. Therefore, it is necessary to design, install and operate a GIS in accordance with the standard operational procedure (SOP). In addition, it is necessary to apply conversion technology for periodical SF6 gas analysis and precision safety diagnosis. It is expected that tracking and managing these changes in characteristics by recording the results on the history card will provide a significant accident prevention effect.

• Environmental Analysis Health and Toxicology
• /
• v.31
• /
• pp.24.1-24.7
• /
• 2016

The humidifier disinfectant disaster (HDD) was not a simple poisoning accident by biocides, but a singular disaster in history created by chemicals in household products. This disaster was a result of the failure of a system for the management of chemical and product safety. Since the management authority for chemical usage safety is different from those for chemical safety in products, many blind areas for chemical safety management in products still remain. The 'Act on the Registration and Evaluation, etc. of Chemical Substances (ARECS)' or the new 'Biocidal Product Act' must not only address the blind areas in the management system for chemical and product safety, but also prevent a second HDD. To prevent another HDD, an integrated registration, evaluation, and management system for chemicals and consumer products must be incorporated into the 'ARECS' as an essential part for chemical safety in consumer products.