• Journal of the Korean Institute of Gas
• /
• v.10 no.2 s.31
• /
• pp.61-67
• /
• 2006

We developed the ultrasonic phased array technique for obtaining ultrasonic images of electrofusion joints of polyethylene piping. And we inspected 4 cases at fields with this technique. First case is for the 300 mm diameter polyethylene electrofusion joint by using 3.5 MHz phased array sensor, second is for the 350 mm diameter saddle electrofusion joint, third is for the 400 mm diameter electrofusion joints and the last one is for the 400 mm diameter piping joints which will be used at 300 kPa suppling pressure.

• Interdisciplinary Bio Central
• /
• v.2 no.2
• /
• pp.5.1-5.9
• /
• 2010

Flavobacterium columnare (F. columnare), the dermotropic Gram negative yellow pigmented bacteria was isolated from different sites of skin ulcerations in the Nile tilapia (Oreochromis niloticus) and Nile catfish (Clarias gariepinus) collected from an earthen pond located at an aquaculture station in Sharkiya Province, Lower Egypt during an acute episode of mass kills during the early summer of 2009. An acute infection with F. columnare was behind the emergent event of mass mortalities among both populations. Many of the Nile tilapias exhibited typical signs of hole - in- the head like lesions from which F. columnare together with the myxosporean spore, Myxobolus tilapiae (M. tilapiae) were retrieved. Most of the cohabitating infected Nile catfishes exhibited severe form of saddle back like ulcer. The identities of the retrieved isolates were confirmed using morphological, biochemical and molecular tools. The research lead us to conclude that the two diverse etiological agents (F. columnare and M. tilapiae) under the triggering effect of the abrupt change in the water quality measures (abrupt rise in the water temperature, ammonia, pH, sharp decrease in dissolved oxygen) have synergized together to induce the above mentioned pathology with the consequent reemergence of fish mass mortalities.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.6
• /
• pp.969-975
• /
• 2013

While accelerating, bicycle frames are subject to torsion forces and deformation. In this study, bicycle frame durability was evaluated by using structural, fatigue, and vibration experiments. Three types of models were designed by changing the frame configurations according to the shape and direction of a bicycle frame design. Because maximum equivalent stress was greatest at the saddle and at connected parts in Models 1, 2, and 3, these frame sections were most vulnerable to failure. Model 2 was the least safe, due to the increased total deformation and equivalent stresses in the top tube horizontal to the ground. Based on vibration and fatigue analysis results, Model 2 was also determined to be the least safe frame, because the head tube was placed slightly higher above the seat tube and inclined to $10^{\circ}$. These study results can be utilized in the design of bicycle frames by investigating prevention and durability against damage.

• Journal of the Korean Society of Combustion
• /
• v.10 no.3
• /
• pp.25-33
• /
• 2005

Fast-time instability is investigated for diffusion flames with Lewis numbers greater than unity by employing the numerical technique called the Evans function method. Since the time and length scales are those of the inner reactive-diffusive layer, the problem is equivalent to the instability problem for the $Li\tilde{n}\acute{a}n#s$ diffusion flame regime. The instability is primarily oscillatory, as seen from complex solution branches and can emerge prior to reaching the upper turning point of the S-curve, known as the $Li\tilde{n}\acute{a}n#s$ extinction condition. Depending on the Lewis number, the instability characteristics is found to be somewhat different. Below the critical Lewis number, $L_C$, the instability possesses primarily a pulsating nature in that the two real solution branches, existing for small wave numbers, merges at a finite wave number, at which a pair of complex conjugate solution branches bifurcate. For Lewis numbers greater than $L_C$, the solution branch for small reactant leakage is found to be purely complex with the maximum growth rate found at a finite wave number, thereby exhibiting a traveling nature. As the reactant leakage parameter is further increased, the instability characteristics turns into a pulsating type, similar to that for L < $L_C$.

• Journal of Animal Science and Technology
• /
• v.57 no.11
• /
• pp.39.1-39.5
• /
• 2015

The effects of castration time on growth and carcass traits of elk bulls were investigated. Twelve bulls at 5 years old were raised and fed on concentrate with ad libitum hay. All animals were allocated randomly to each of four treatment groups (3 heads/group). Groups of each treatment were castrated surgically in March, April or June and managed together with non-castration (entire) treatment. All elk bulls in the trial were slaughtered at same time. Growth parameters, carcass yield and composition were recorded. The total gain and average daily gain was higher when castrated in April (p < 0.05). The entire elk produced heaviest and highest in saddle and brisket portions (p < 0.05). It is apparent that the castrate animals carried more total fat weight and percentages than the entire males (p < 0.05). It was found that loin muscles from non-castrated elk, in comparison with those from castrated one, had higher content of moisture and lower content of fat (p < 0.05). In this study, growth parameters, carcass yields and chemical composition were greatly affected by castration time.

• Structural Engineering and Mechanics
• /
• v.67 no.6
• /
• pp.555-563
• /
• 2018

Architectural fabrics membranes have not only the structural performance but also act as an efficient cladding to cover large areas. Because of the direct relationship between form and force distribution in tension membrane structures, form-finding procedure is an important issue. Ideally, once the optimal form is found, a uniform pre-stressing is applied to the fabric which takes the form of a minimal surface. The force density method is one of the most efficient computational form-finding techniques to solve the initial equilibrium equations. In this method, the force density ratios of the borders to the membrane is the main parameter for shape-finding. In fact, the shape is evolved and improved with the help of the stress state that is combined with the desired boundary conditions. This paper is evaluated the optimum amount of this ratio considering the curvature of the flexible boarders for structural configurations, i.e., hypar and conic membranes. Results of this study can be used (in the absence of the guidelines) for the fast and optimal design of fabric structures.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.11
• /
• pp.78-81
• /
• 1995

In imaging the samples or human internal organs in a tube shape, general RF-probe types (that encircles a sample or places on top of the sample) are usually unsuitable for the internal imaging due to the degradation of signal-to-noise ratios(SNR's). In the present study the inside-out probes for Magnetic Resonance Imaging (MRI) have been constructed in the three different shapes such as an anti-solenoidal, a saddle and a dual surface types which are positioned as close to the area as possible by putting the probe inside the tubelike sample to improve filling factor. RF-field distributions have also been calculated depending upon the geometrical changes of anti-solenoid probes. Moreover, the performance of the inside-out probes has been checked by measuring SNR's of the images acquired. The inside-out probes constructed in this study produced better SNR's and rf-field uniformity in the area close to the probes in comparing with any other commercial probes. There is a high possibility that the constructed probes in the present study are applicable to the diagnosis of human bodies.

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.19-24
• /
• 2008

The thesis is for gust factor needing when calculate the wind resistance design. For the gust factor, to the membrane structural model, carry through the wind tunnel test and the static load test. Therefore, at first through the tensile test of the fabric material, designate the material of the membrane structural model. Then, to saddle, wave, arch and point four kinds of basic shape membrane structural models, carry on the wind tunnel test, determine their dynamic load and distortion on lateral direction. Finally, according to distort situation of the membrane structure in the wind tunnel test, carry on the static load experiment outside of the wind tunnel, calculate static load which corresponding with distort. According to dynamic load and the static load, figure out gust factor of these kinds of basic membrane structure.

• The korean journal of orthodontics
• /
• v.23 no.3 s.42
• /
• pp.341-358
• /
• 1993

This study was investigated to evaluate the morphologic characteristics of deepbite tendency as multiple factors. The subjects consisted of 60 control subjects(male 25, female 35) and 137 deephite patients(68 male, 69 female). The deepbite group was composed of 4 subgroups(Class I 44, Class II div. 1 40, Class II div. 2 13, Class III 40). The mean age was 21.57 year for the control group 21 year for deepbite group lateral cephalograph in centric occlusion were taken, traced, and digitized for each subject. The statistically computerized analysis was carried out with SAS program. The results were as follows ; 1. In deepbite group, saddle angle is lesser than that of normal group. 2. The vertical dysplasia is prominent on anterior lower face and is closely related with mandibular form and inclination. 3. Without consideration of sagittal relationship, the dental factors such as curve of Spee, interincisal angle, U1 to upper lip length were prominent in the deepbite group. 4. Although there were individual variances in the perioral soft tissue profile, the lip presented more protruded pattern. 5. There was no significant difference in hyoid bone position and inclination between normal and deepbite group. 6. The multivariate discriminant analysis between normal and Class I deepbite group showed that curve of Spee, AB-MP angle, interincisal angle, articular agnle were critical in the determination of deepbite as multiple factors.

• Journal of the Korean Society of Costume
• /
• v.38
• /
• pp.233-244
• /
• 1998

This research wants to find the possibility for new paradigm of modern Korean dress by accepting and harmonizing the tradition and the modernization of Korean design when Korean designers enter into Paris collection and express identity of Korean fashion, and investigates the characteristics of Korean design with concentrating on the works of Young-hee Lee, Shin-woo Lee, Tae-ok Jin who have exhibited their works at Paris Collection. For one of the above characteristics Young-hee Lee, a designer of Korean clothes, emphasized to build up image of Korean fashion as a form of Korea without any modification, and expressed universal western-style silhouette as Korean image by using traditional technique including dyeing and silk made by herself, quil-t and decorative saddle stitching. In the as-pect that a chain of work has made not by westernization of Korean clothes but by re-creation of Korean clothes, it suggested a new way of modern Korean fashion with harmonizing tradition with modernizations as of present based on our own dress tradition and have got good reputation from the press and the field in Paris as well. Therefore the tradition and the modernization of Korean design is not confronted or compromised in form, color, material, motif and decoration but has to be harmonized and reconciled independently in order that visual characteristics of dress can be made as one of Korean image.