• Journal of the Korean Society of Manufacturing Process Engineers
• /
• 제11권4호
• /
• pp.72-81
• /
• 2012

This study investigates structural, fatigue and modal analyses at bicycle suspension seat post. When weight is applied to the saddle, models 1 and 2 have the weakest strength at the part connected with saddle. And model 2 is greater total deformation and equivalent stress than model 1. Among the cases of nonuniform fatigue loads at models 1 and 2, 'SAE bracket history' with the severest change of load becomes most unstable but 'Sample history' becomes most stable. In case of 'Sample history' with the average stress of 0 to $-10^4MPa$ and the amplitude stress of 0 to $10^4MPa$, the possibility of maximum damage becomes 4%. This stress state can be shown with 5 to 7times more than the damage possibility of 'SAE bracket history' or 'SAE transmission'. Model 1 has better impulse relaxation and passenger sensitivity than model 2. The structural result of this study can be effectively utilized with the design of bicycle suspension seat post by investigating prevention and durability against its damage.

• Journal of KIISE
• /
• 제44권7호
• /
• pp.726-732
• /
• 2017

In practical distributed sensing and prediction applications over wireless sensor networks (WSN), environmental sensing activities are highly dynamic because of noisy sensory information from moving source signals. The recent distributed online convex optimization frameworks have been developed as promising approaches for solving approximately stochastic learning problems over network of sensors in a distributed manner. Negligence of mobility consequence in the original distributed saddle point algorithm (DSPA) could strongly affect the convergence rate and stability of learning results. In this paper, we propose an integrated sliding windows mechanism in order to stabilize predictions and achieve better convergence rates in cooperative detection of a moving source signal scenario.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제25권10호
• /
• pp.1355-1364
• /
• 2001

Characteristics of secondary vortices is topologically investigated in the near-wake region of a circular cylinder, where the Taylor's hypothesis does nut hold. The three-dimensional flow fields in the wake-transition regime were measured by a time-resolved PIV for various planes of view. The convection velocities of the Karman and secondary vortices are evaluated from the trajectory of the vortex center. Then, saddle points are determined by applying the critical point theory. It is shown that the inclination angle of the secondary vortices agrees well with the previous experimental data. The flow fields in a moving frame of reference have several critical points and the mushroom-like structure appears in the streamline patterns of the secondary vortices. Since the distributions of fluctuating Reynolds stresses defined by triple decomposition are closely related with the existence of secondary vortices, the physical meaning of them is explained in conjunction with the vortex center and saddle point trajectories.

• Journal of the Society of Naval Architects of Korea
• /
• 제52권1호
• /
• pp.70-76
• /
• 2015

The ship hull is accomplished by assembling various curved surfaces. There are numerous existing methods for ship hull processing, which need certain appropriate processing methods to enable it to be more efficient. The curved hull plates can be divided into convex region and saddle region. It is common to use line heating method to form a saddle region, when it comes to a convex region, it will be triangle heating method to be utilized. A precise analysis for curvature domain is required for the application of proper processing method. There exist various problems on existing calculation methods of curvature domain. Therefore, a more powerful method is demanded to it more accurately. In this study, a method called Dual Contouring is applied to extract curved surfaces, which is able to improve accuracy of extracted area. Based on all above, a best-suited heat processing method should be selected.

• Journal of the Society of Naval Architects of Korea
• /
• 제45권4호
• /
• pp.417-425
• /
• 2008

In the line heating process, only angular distortion whose direction is perpendicular to that of a heating path is expected. However, it is observed that a deformation is induced in the direction of the heating line. Because of this, during forming a saddle type plate we experience unfavorable deformations in the unintended direction. In this paper we discuss the unwanted distortion in the manufacturing process by analyzing intermediate plates of saddle type during fabrication. For this analysis we consider the longitudinal and transversal directions separately and use the bending strain for the analysis.

• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.719-728
• /
• 2013

Probabilistic assessment of voltage stability margin (VSM) with existence of correlated wind speeds is investigated. Nataf transformation is adopted to establish wind speed correlation (WSC) model. Based on the saddle-node bifurcation transversality condition equations and Monte Carlo simulation technique, probability distribution of VSM is determined. With correlation coefficients range low to high value, the effect of WSC on VSM is studied. In addition, two risk indexes are proposed and the possible threat caused by WSC is evaluated from the viewpoint of risk analysis. Experimental results show that the presence of correlated wind speeds is harmful to safe and stable operation of a power system as far as voltage stability is concerned. The achievement of this paper gives a detailed elaboration about the influence of WSC on voltage stability and provides a potentially effective analytical tool for modern power system with large-scale wind power sources integration.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제68권1호
• /
• pp.172-181
• /
• 2019

This paper deals with the problem of generating the energy optimal trajectory which is intended to enhance the target tracking performance of a passive homing missile. Noticing that the essence of passive target tracking is the range estimation problem, the target information gathered by passive measurements can be readily analyzed by introducing the range estimator designed in line-of-sight(LOS) frame. Moreover, for the linear filter structure of the suggested range estimator, the cost function associated with the target information is clearly expressed as a function of the line-of-sight rate. Based on this idea, the optimal missile trajectory maximizing the target information is obtained by solving the saddle point problem for an indefinite quadratic cost which consists of the target information and the energy. It is shown that, different from the previous heuristic approaches, the guidance command producing the optimal passive homing trajectory is produced by the modified proportional navigation guidance law whose navigation constant is determined by the weighting coefficient for target information cost.

• Acta Via Serica
• /
• 제7권2호
• /
• pp.39-64
• /
• 2022

Ancient Iranians highly esteemed the horse and horse tacks, one of which is the jul (saddlecloth). It is a felt, sheepskin, or woven pad placed between the horse's back and saddle. The aim of this paper is to identify and categorize jul designs in the Sāsānian period. The research questions are about the variety of jul designs and how to categorize them. This is fundamental research and the method is descriptive and analytical. Neither a jul nor a saddle-cover remains from the Sāsānian period, therefore the statistical population includes all available items, such as metal and stone items and parget and plasterworks, in which juls are recognizable. Due to the scarcity of such items, all the available samples were studied; so the sampling method is a total enumeration. This is documentary research by means of note-taking and using reliable websites; the data has been analyzed qualitatively. The results show that jul designs were not diverse in the Sāsānian period. All-over designs were dominant. In terms of pattern types, these designs are classified into five groups, each of which has its own formal and aesthetic characteristics: all-over design with a four-petal flower pattern, allover design with a checkered pattern, all-over design with a spotted pattern, allover design with a tiger stripe pattern, and all-over design with a zigzag pattern.

• Ocean Systems Engineering
• /
• 제13권1호
• /
• pp.43-55
• /
• 2023

In this study, the SCFs in tubular T-joints stiffened with external ring under axial load are studied and discussed. After verification of the present numerical model with the results of several available experimental tests, 156 FE models were generated and analyzed to parametrically evaluate the effect of the joint geometry and the ring geometry on the SCFs. Results indicated that the SCF of the stiffened T-joints at crown point can be down to 24% of the SCF of the corresponding un-reinforced joint at the same point. Also, the effect of the ring on the SCF at saddle point is more remarkable than the effect of the ring on the SCF at crown point. Moreover, against un-reinforced joints under axial load, the SCF at saddle point of the stiffened joint is smaller than the SCF at crown point of that stiffened joint. The ring results in the redistribution of stresses in the ring and metal substrate. Also, the effect of the ring thickness on the decrease of the SCFs is slight and can be ignored. In final step, the geometric parameters affecting the SCFs of the stiffened T-joints are analyzed by multiple nonlinear regression analyses. An accurate formula is proposed for determining the SCFs.

• Journal of English Language & Literature
• /
• 제56권3호
• /
• pp.557-575
• /
• 2010

Pierre breaks the rules of convention and acquires the 'potential not to do.' To transform the traditional hero into the new potential subject, Pierre moves from his hometown, Saddle Meadows, New York City to the dungeon of the city prison and creates three different relationships that symbolize what ideology and principles repress his mind and behavior and how he handles them. Firstly, in Saddle Meadows, Pierre has a narcissistic relationship with his mother, Mary, who teaches him the principles of American manhood and forces him to be docile: he has to obey Mary's order that a man should be a gentleman. Therefore, since he does not know his potential, he does not create his own work and is involved in plagiarism. Secondly, in New York City, Pierre creates an associated relationship with Isabel, his half-sister, who represents an ambiguous and mysterious character and has the 'potential not to do' that leads Pierre to destroys the beliefs of American manhood and performs the potential to do. Consequently, Pierre puts himself in an extreme situation and is absolutely liberated from the influence of his dead father, who unconsciously controls Pierre's behavior and thoughts. Thus, he makes a dissociated relationship with his father. In the dungeon, he physically dies, but symbolically metamorphoses into Isabel, so that he blurs the differences between Isabel and himself. Furthermore, he never stays in his own way: in this on-going process, Pierre cannot determine which is good or bad, legitimate or illegitimate and life or death.