• The Pure and Applied Mathematics
• /
• v.19 no.1
• /
• pp.23-35
• /
• 2012

Given a set ${\Omega}$ and the notion of bipolar valued fuzzy sets, the concept of a bipolar ${\Omega}$-fuzzy sub-semigroup in semigroups is introduced, and related properties are investigated. Using bipolar ${\Omega}$-fuzzy sub-semigroups, bipolar fuzzy sub-semigroups are constructed. Conversely, bipolar ${\Omega}$-fuzzy sub-semigroups are established by using bipolar fuzzy sub-semigroups. A characterizations of a bipolar ${\Omega}$-fuzzy sub-semigroup is provided, and normal bipolar ${\Omega}$-fuzzy sub-semigroups are discussed. How the homomorphic images and inverse images of bipolar ${\Omega}$-fuzzy sub-semigroups become bipolar ${\Omega}$-fuzzy sub-semigroups are considered.

• ETRI Journal
• /
• v.14 no.4
• /
• pp.19-27
• /
• 1992

Since. as is well known, direct computation of the reliability for a large-scaled and complex net work generally requires exponential time, a variety of alternative methods to estimate the network reliability using simulation have been proposed. Monte Carlo sampling is the major approach to estimate the network reliability using simulation. In the paper, a dynamic Monte Carlo sampling method, called conditional minimal cut set (CMCS) algorithm, is suggested. The CMCS algorithm simulates a minimal cut set composed of arcs originated from the (conditional) source node until s-t connectedness is confirmed, then reduces the network on the basis of the states of simulated arcs. We develop the importance sampling estimator and the total hazard estimator and compare the performance of these simulation estimators. It is found that the CMCS algorithm is useful in reducing variance of network reliability estimator.

• Journal of the Korean Data and Information Science Society
• /
• v.15 no.2
• /
• pp.457-465
• /
• 2004

Ramik[7] introduced a fuzzy goal programming (FGP)problem that generalizes a standard goal programming (GP) problem with fuzzy alternatives, fuzzy objective functions and fuzzy deviation functions for measuring the deviation between attained and desired goals being fuzzy. However, it is known that this FGP tends to produce an approximate solution since it uses an approximate fuzzy multiplication operation to solve the resultant fuzzy model. In this paper, we show that this FGP sometimes leads to the wrong decision. We also propose a procedure that gets the exact solution to overcome these problems. The method is based on $T_M$ (min norm)-based fuzzy operations using $\alpha-cut$ representations. We consider the same example as used in Ramik and investigate how our procedures are compared to Ramik's.

• ETRI Journal
• /
• v.27 no.3
• /
• pp.304-311
• /
• 2005

We report on the fabrication of an AlGaAs/InGaAs/GaAs pseudomorphic high electron mobility transistor (PHEMT) using a dielectric-defined process. This process was utilized to fabricate $0.12\;{\mu}m\;{\times}\;100 {\mu}m$ T-gate PHEMTs. A two-step etch process was performed to define the gate footprint in the $SiN_x$. The $SiN_x$ was etched either by dry etching alone or using a combination of wet and dry etching. The gate recessing was done in three steps: a wet etching for removal of the damaged surface layer, a dry etching for the narrow recess, and wet etching. A structure for the top of the T-gate consisting of a wide head part and a narrow lower layer part has been employed, taking advantage of the large cross-sectional area of the gate and its mechanically stable structure. From s-parameter data of up to 50 GHz, an extrapolated cut-off frequency of as high as 104 GHz was obtained. When comparing sample C (combination of wet and dry etching for the $SiN_x$) with sample A (dry etching for the $SiN_x$), we observed an 62.5% increase of the cut-off frequency. This is believed to be due to considerable decreases of the gate-source and gate-drain capacitances. This improvement in RF performance can be understood in terms of the decrease in parasitic capacitances, which is due to the use of the dielectric and the gate recess etching method.

• Spatial Information Research
• /
• v.4 no.1
• /
• pp.93-105
• /
• 1996

The purpose of this study was to give some ideas to the improving direction and evaluation in order to solve physical' ecological problems appeared after urban park construction. This study selected Namsangol park as a site, because this park was constructed to the goal in order to rehabilitate the original landform as a part of "Namsan original landscape rehabilitation work". So this study was executed to investigate past and present landform change, soil condition, planting, water/climate etc., and then these were analyzed by GIS.- soil :pH, Ec, organic matter, the ability of moisture content, bulk density, porosity, etc.- planting:planting density, plant species- water/climate: the amount of rainfall, drainage and drainage-basin. And then this study overlayed soil+cut/fill, soil+pine tree, cut/fill + planting density, and cut/fill + plant species.t species.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.17 no.2
• /
• pp.187-198
• /
• 1997

This experiment was conducted to evaluate effects of wilting and additives on fermetation characteristics, quality and aerobic stability of silage of rye(Seca1e cereale L.) harvested at the early heading stage. Harvested rye was wilted or mixed with beet pulp and then treated with formic acid or lactic acid bacteria(LAB) inoculant. Treatments were consisted of direct cut(DC), wilted(WT), beet pulp added(BP), direct cut and formate applied(DF), wilted and formate applied(WF), beet pulp and formate applied(BF), direct cut and LAB inoculated(DL), beet pulp added and LAB inoculated(BL), and wilted and LAB inoculated(WL) silages. Afler 70 days of ensiling period, the silages were opened and exposed to air for 7 days, and the silages of opening day(0 day) were compared with the silages exposed to air for 7 days(7 day). 1. LAB inoculated rye silages(DL, WL, BL) lowered pH values effectively eom the third day of ensiling and showed most stable pattern of pH changes during the initial fermentation process. Direct cut and formate applied(DF), beet pulp and formate applied(BF) and beet pulp added(BP) silages were also effective in lowering pH from the seventh day thai direct cut treatment(DC). 2. pH was low below 3.7 in all treatments of 0 day. After 7-day period of aerobic exposure, DL and WL showed considerable increases in pH from 3.5 and 3.4 to 8.3 and 6.4, respectively. 3. Direct cut rye silages(DF, DC, DL) and beet pulp and formate treatment(BF) produced effluent of 121.2, 85.9, 80.3 and 34.2 mlkg, respectively and these were greater than others(P<0.01). Beet pulp retained 1.61 I/kg of effluent at the application rate of 50 kg/t in comparing BP with DC, and formate application increased the amount of effluent in comparing DF and BF with DC and BP, respectively(P<0.01). 4. Beet pulp and LAB treatment(B1) was highest in content of lactate as 3.1% and formate treated silages(DF, WF, BF) showed lower content of lactate and total acid than others. LAB inoculated(D1, WL, BL) and wilted (WT) silages were graded to be good quality as a second group by the Flieg's score. Formate applied silages (DF, WF, BF) were graded as a foum group lower than DC by one. 5. Residual content of WSC of rye silage was higher in BP, BF, DL and BL than direct cut treatment(M3) (P< 0.01). Formate application had a tendency to increase the content of residual content of WSC. 6. For the ratio of NH3-N to Total N, wilted and LAB inoculated(W1) and direct cut and LAB inoculated(D1) silages were lowest on 0 day as 8.9 and 9.3% respectively. But after 7-day period of aerobic exposure, WL and DL showed largest increase of the ratio of $NH_3-N$ to Total N from 0 day(P<0.01). 7. On 0 day wilted(WT), beet pulp and formate treatment(BF), and beet pulp and LAB treatment(B1) were lower than direct cut treatment(DC) for NDF and ADF concentrations consistently. Formate applied silages (DF, WF, BF) made little change in ADF and NDF concentrations during 7 day period of aerobic exposure. DL and WL showed a large increase in ADF and NDF concentrations under aerobic condition(P<0.01). 8. IVDMD values of wilted(WT), beet pulp added(BP), wilted and LAB inoculated(W1) and beet pulp added and LAB inoculated(B1) silages were higher than direct-cut treatmentPC) as 84.7, 84.7, 84.4 and 83.0%, respectively on 0 day. But during 7-day period of aerobic exposure, a great decreae in IVDMD of WL was showed(P<0.01). The experimental results indicate that wilted silage(WT) could be recommended as the most effective treatment for reducing efluent and increasing quality and feed value of rye silage without deteriorating aerobic stability more than direct cut treatment(DC). Additionally, under unfavorable weather condition beet pulp added and LAB inoculated treatment(T3L) might be the possible alternative for successful ensiling of forage rye.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2317-2319
• /
• 1999

765kV Transformer, bank capacity is 2,000MVA, is developed of two seperated tanks per phase because transportation weight of the transformer needs to be reduced. So we will operate one tank per phase in some case, low load or black down of 1 tank, using the one phase-two tank type of 765kV transformer to cut down the cost and improve the reliability of substation.

• Honam Mathematical Journal
• /
• v.31 no.4
• /
• pp.591-599
• /
• 2009

For given ${\alpha},{\omega}\;{\in}\;{\mathbb{R}}$ and ${\beta}$ > 1, let $T_{{\beta},{\alpha},{\omega}}$ be the skew-product transformation on the torus, [0, 1) ${\times}$ [0, 1) defined by (x, y) ${\longmapsto}\;({\beta}x,y+{\alpha}x+{\omega})$ (mod 1). In this paper, we give a criterion of ergodicity and weakly mixing for the transformation $T_{{\beta},{\alpha},{\omega}}$ when the natural extension of the given ${\beta}$-transformation can be viewed as a generalized baker's transformation, i.e., they flatten and stretch and then cut and stack a two-dimensional domain. This is a generalization of theorems in [10].

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.4
• /
• pp.357-362
• /
• 1997

This paper suggests an automatic calibration technique for piezoelectric low pressure transducer measuring a pressure blow 500psi. The present calibration system embedded with error correction algorithm generates it's best you don't cut parts of wards like so dynamic pressure and compensates offset voltage and pressure error. It is shown via experimental results that the instrumentation accuracy has been improved and mean time between calibrations has been shortened.

• Bulletin of the Korean Mathematical Society
• /
• v.60 no.4
• /
• pp.905-913
• /
• 2023

Suppose that M is a strictly convex hypersurface in the (n + 1)-dimensional Euclidean space 𝔼ⁿ⁺¹ with the origin o in its convex side and with the outward unit normal N. For a fixed point p ∈ M and a positive constant t, we put 𝚽_t the hyperplane parallel to the tangent hyperplane 𝚽 at p and passing through the point q = p - tN(p). We consider the region cut from M by the parallel hyperplane 𝚽_t, and denote by I_p(t) the (n + 1)-dimensional volume of the convex hull of the region and the origin o. Then Schneider's characterization theorem for ellipsoids states that among centrally symmetric, strictly convex and closed surfaces in the 3-dimensional Euclidean space 𝔼³, the ellipsoids are the only ones satisfying I_p(t) = 𝜙(p)t, where 𝜙 is a function defined on M. Recently, the characterization theorem was extended to centrally symmetric, strictly convex and closed hypersurfaces in 𝔼ⁿ⁺¹ satisfying for a constant 𝛽, I_p(t) = 𝜙(p)t^𝛽. In this paper, we study the volume I_p(t) of a strictly convex and complete hypersurface in 𝔼ⁿ⁺¹ with the origin o in its convex side. As a result, first of all we extend the characterization theorem to strictly convex and closed (not necessarily centrally symmetric) hypersurfaces in 𝔼ⁿ⁺¹ satisfying I_p(t) = 𝜙(p)t^𝛽. After that we generalize the characterization theorem to strictly convex and complete (not necessarily closed) hypersurfaces in 𝔼ⁿ⁺¹ satisfying I_p(t) = 𝜙(p)t^𝛽.