• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.7
• /
• pp.57-65
• /
• 2002

In this paper, a 2.5V 10-bit 300MSPS CMOS D/A Converter is described. The architecture of the D/A Converter is based on a current steering 8+2 segmented type, which reduces non-linearity error and other secondary effects. In order to achieve a high performance D/A Converter, a novel current cell with a low spurious deglitchnig circuit and a novel inverse thermomeer decoder are proposed. To verify the performance, it is integrated with $0.25{\mu}m$ CMOS 1-poly 5-metal technology. The effective chip area is $1.56mm^2$ and power consumption is about 84mW at 2.5V power supply. The simulation and experimental results show that the glitch energy is 0.9pVsec at fs=100MHz, 15pVsec at fs=300MHz in worst case, respectively. Further, both of INL and DNL are within ${\pm}$1.5LSB, and the SFDR is about 45dB when sampling, frequency, is 300MHz and output frequency is 1MHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.919-925
• /
• 2011

In this paper, we designed and analyzed a 3D isotropic bulk structure consisting of thin wires and SRR's(Split Ring Resonator) with which the permittivity and permeability can be controlled at the same time. For the 3D isotropic bulk structure, first of all, the geometry seen by three main axes must look alike. Thus, we adopted the orthogonal thin wires and symmetrical SRR's. As a result, we constructed metamaterial bulk structures of which effective relative permittivity and permiability are about -0.6 and -1.5, respectively. Its refractive index is about -0.95 in each direction(x, y and z direction). The computed Brillouin dispersion diagram also showed that the proposed structure is almost near isotropic.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.82.1-82.1
• /
• 2012

We present results of searching for the Very Low Luminosity Objects (VeLLOs; internal luminosity Lint<0.1Lo) candidates in the Gould Belt's clouds using infrared observations from 3.6 to 70 micron by the Spitzer Space Telescope. More than 100 VeLLO candidates were selected through the criteria by Dunham et al. and our additional ones. The candidates in Northern sky were recently observed with high density tracers such as N2H+ (1-0) and HCN (1-0) using Korea VLBI Network (KVN) 21m telescope at Yonsei site to check their embeddedness in dense gas envelopes. A total of 25 out of 74 VeLLO candidates were detected in either N2H+ or HCN (1-0) line while 9 candidates were detected in both tracers. These are more likely bona fide VeLLOs which need to be studied further in future. In this study the bolometric luminosities for 40 VeLLOs (25 from this study and 15 from Dunham et al.) were estimated and found to be significantly smaller than those given by various theoretical model tracks with constant accretion rate in a BLT diagram, indicating the constant accretion process suggested by standard star formation models can not explain the faintness of the VeLLOs. In the talk we will discuss on some possible explanation of why the VeLLOs are faint.

• Toxicological Research
• /
• v.26 no.1
• /
• pp.21-28
• /
• 2010

As the frequency and the intensity of so called Asian dust (AD) events have increased, public concerns about the adverse health effects has spiked sharply over the last two decades. Despite the recent reports on the correlation between AD events and the risk for cardiovascular and respiratory disease, the nature of the toxicity and the degree of the risk are yet largely unknown. In the present study, we investigated the effects of the dichloromethane extract of AD (AD-X) and that of urban dust (NAD-X) collected during a non-AD period on gene expression in HL-60 cells using Illumina Sentrix HumanRef-8 Expression BeadChips. Global changes in gene expression were analyzed after 24 h of incubation with 50 or 100 ${\mu}g$/ml AD-X and NAD-X. By one-way analysis of variance (p < 0.05) and Benjamini-Hochberg multiple testing correction for false discovery rate of the results, 573 and 297 genes were identified as AD-X- and NAD-X-responsive, respectively. The genes were classified into three groups by Venn diagram analysis of their expression profile, i.e., 290 AD-X-specific, 14 NAD-X-specific, and 283 overlapping genes. Quantitative realtime PCR confirmed the changes in the expression levels of the selected genes. The expression patterns of five genes, namely SORL1, RABEPK, DDIT4, AZU1, and NUDT1 differed significantly between the two groups. Following rigorous validation process, these genes may provide information in developing biomarker for AD exposure.

• Safety and Health at Work
• /
• v.8 no.2
• /
• pp.151-155
• /
• 2017

Background: At the entrance of a tunnel, reflection of sunlight from the surrounding environment and a lack of adequate lighting usually cause some vision problems. The purpose of this study was to perform a safety evaluation of lighting on a very long road in Ilam, Iran. Methods: The average luminance was measured using a luminance meter (model S3; Hagner, Solna, Sweden). A camera (model 108, 35-mm single-lens reflex; Yashica, Nagano, Japan) was used to take photographs of the safe stopping distance from the tunnel entrance. Equivalent luminance was determined according to the Holliday polar diagram. Results: Considering the average luminance at the tunnel entrance ($116.7cd/m^2$) and using Adrian's equation, the safe level of lighting at the entrance of the tunnel was determined to be 0.7. Conclusion: A comparison between the results of the safe levels of lighting at the entrance of the tunnel and the De Boer scale showed that the phenomenon of black holes is created at the tunnel entrance. This may lead to a misadaptation of the drivers' eyes to the change in luminance level at the entrance of the tunnel, thereby increasing the risk of road accidents in this zone.

• Journal of Elementary Mathematics Education in Korea
• /
• v.6 no.1
• /
• pp.23-40
• /
• 2002

Historically, the use of algorithms has been emphasized in the mathematics curriculum at the elementary school mathematics. The current reform movement in our country are seemed to emphasize the importance of algorithms in favor of problem-solving approaches, the conceptualization of mathematical processes and applications of mathematics in real world situations. Recently, children may come to school with a fairly well-developed attitude about mathematics and mathematical ideas. That is, they do not come to school and to learning mathematics with a clean slate. Because they have already formed some partial mathematical concepts in a wide variety of contexts. Many kindergarten children have attended pre-school programs where they played with blocks, made patterns, and started adding and subtracting. It seems that there are psychological change attitudes of the children in upper grades toward learning mathematics. In our elementary school mathematics, almost every student are still math anxious or have developed math anxiety because of paper-pencil test. In these views, this paper is devoted to introduce and apply to second grade students in ND-elementary school in Taegu City the new method for learning addition and subtraction so called ‘Mrs Weill's Hill’, which is believed as a suitable method for children with mathematical teaming disabilities and Math anxiety.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.2
• /
• pp.1-16
• /
• 2001

Management of geo-workflow's changes is one of growing issues and requires more advanced ways and methods to deal with heterogeneous modifications and interactions of process, activity and event over time. A few dominant workflow models have coped with these subjects. There is, however, little consensus for explanation of six dimensions with regard to actor, activity, space, time, reason and effect. This study begins with examining environments of six dimensions and the Hexad model is proposed to elucidate the causes and results of a wide variety of geo-processes and activities. In this paper, we will introduce Hexad Object Activity Model making it possible to interpret manifest motivations, conditions and actions. Full descriptions of six dimensions are often useful for applying to the handling of diverse activities particularly requiring to clarify actor's goal and role at a specific time and space.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.83-93
• /
• 2003

This research, in order to study the effects of initial shear stress of anisotropically consolidated sand that has 0.558% fines, performed several undrained static and dynamic triaxial test. To simulate the real field conditions, loose and dense samples were prepared. Besides, the cyclic shear strength of Nakdong River sand under various combinations of initial static shear stress, stress path, pore water pressure and residual strength relationship was studied. By using Bolton's theory, peak internal friction angle at failure which has considerable effects on the relative density and mean effective stress was determined. In p'- q diagram, the phase transformation line moves closer to the failure line as the specimen's initial anistropical consolidation stress increases. Loose sands were more affected than dense sands. The increase of consolidation stress ratio from 1.4 to 1.8 had an effect on liquefaction resistance strength resulting from the increase of relativity density, and showed similar CSR values in dense specimen condition.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.5
• /
• pp.548-554
• /
• 1985

This research is to find a means of reducing diesel engine combustion noise with none or minimum sacrifice of engine performance by investigating the influence of Cylinder Pressure Level(CPL). For this purpose, modified Wiebe's combustion function, considering the heat release curve as a combustion of both premixed and diffusive combustion portion, was exclusively used to obtain the indicator diagram and computer coeds were developed for the numerical analysis. Following are the results of this research. (1) CPL increases almostly with lag of ignition timing increasing .alpha. and decreasing. theta.$_{d}$, but at the crank angle with the maximal efficiency, CPL is independent of .alpha. and .theta.$_{d}$ with constant value of 200 dB especially at the low frequency. (2) For the constant ignition timing, the effects of .alpha. and .theta.$_{d}$ on CPL were the most significant at the frequency of about 1KHz and 300Hz respectively. (3) For the constant value of .alpha. and .theta.$_{d}$, CPL increases linearly with load but thermal efficiency increase very rapidly with maximum value of load Q$_{T}$=30-40 MJ/Kmol, then starts to decrease slowly. (4) The most effective way of reducing combustion noise without sacrificing thermal efficiency, is to decrease .alpha.. In the case of constant .alpha., there always exists a optimum value of .theta.$_{d}$ with respect to the various compression ratio.o..atio.o..

• The KIPS Transactions:PartD
• /
• v.12D no.7 s.103
• /
• pp.1071-1078
• /
• 2005

Use case modeling is a widely used technique for functional requirements analysis of business system but it is difficult to identify a use cases at the right level and use case specifications are too long and confusing. It is also hard to determine a functional decomposition Phases·s of use cases. Therefore customer doesn't understand the use cases. This paper is defining concept of the Information Structure Modeling(ISM) and analyzing business system for the customer's perspective. ISM is an efficient mechanism for analyzing user requirements and for Identifying objects in a business system using Attribute Structure Diagram which is a major tool of the ISM that describes user event. This paper is also to show how the classes are classified and derived as event-asset-transaction type in ISM. It provides a user-friendly approach to visually representing business model.