• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.2
• /
• pp.360-378
• /
• 2018

Noeui was a garment used for women's outfits and robes. In the late Joseon Dynasty it was a special garment that could only be worn by the class belonging to the royal family. Noeui was especially prepared as a wedding dress, and was worn by the bride at the Chinyeong ceremony on the day of the wedding ceremony. Until now, Noeui did not have in depth research at the costume history despite its importance as a royal costume in the Joseon Dynasty. Thus, based on Uigwe for the Royal Wedding Ceremony of King Injo and Queen Jangryeol (which is the only material with a diagram of Noeui and its pattern) this study historically investigated and restored the Noeui set of Queen Jangryeol, which was arranged in 1638, when King Injo and Queen Jangryeol were married. This academic study is the first to historically confirm and restore Queen Noeui's set, and rigorously analyze the historical materials as well as provide new comments on the shapes of Noeui's Git and the front side.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.254-259
• /
• 1995

Large scale display panel(LSDP) is a main component in the next generation main control rooms. LSDP is located at the front of VDU-based operator's workstation and plays an important role in providing operators with overall information of plant status through mimic diagram, text/digit, graph, and so on. A critical matter determined at the first stage of LSDP design is how much information is displayed, because the information density of LSDP affects operator's performance. Many human factors guidelines recommend low information density of displays to avoid degrade of operator's performance, but doesn't provide a useful limit of information density. In this paper, we considered information density as the number of plant parameters and investigated the proper number of plant parameters through a human factors experiment. The experiment with 4 subjects was carried out and response time, error, and heart rate variation as criterion measures were recorded and analyzed. As the results, it is identified that the proper number of parameters in a LSDP is about thirty.

• Journal of the HCI Society of Korea
• /
• v.4 no.2
• /
• pp.1-8
• /
• 2009

User-centered design aims to develop device naturally without the interference of user' s conscious and unconscious behavior. Accordingly, designers need to understand their user's requirements, observe user behavior and interaction in the real environment. However, existing observations suggested a vast range of analysis system and observation techniques which are often ambiguous to the designers. Therefore, this research is aimed to propose an observation system for collecting data from user's behavior. In order to do so, we define the components and behavior level within the context of driving.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.12 no.3
• /
• pp.35-41
• /
• 2006

At the moment, a lot of interest in the research on Gnotobiotic Pigs are increasing in order to produce alternative human organs. So, it is very important to design and build proper housing facilities for Germ Free Pigs. Among the design issues related to Gnotobiotic Pigs' farms, circulation system takes a high position because it carries an important role in keeping the pig's housing environment aseptic. Considering those, this study aims to propose the guidelines for the design of circulation system in Germ Free Pig's facilities. The results of this study are as follows. At first, functional areas of Germ Free Pigs' facilities have been divided into three categories according to the clean level; aseptic area, semi-aseptic area, and non-aseptic area. Secondly, the basic principles of circulation system have been proposed. Finally, circulation system of Gnotobiotic Pigs' facility has been explored as a form of diagram according to the circulating subjects. These include human circulation, pig's circulation, and goods' circulation. This study has some limitations in that it is transcendent and lacks empirical evidence. Despite of some weaknesses, it is expected to give some useful guidelines for the design of circulation system in Germ Free Pigs' facilities.

• 한국해양학회지
• /
• v.8 no.2
• /
• pp.68-74
• /
• 1973

The present paper concerns the age determination and growth of butter fish, Pampus argenteus from the southwestern waters of Korea by otolith reading. 743 specimens taken by stow-net in the southern part of the Yellow Sea and northeastern part of the East China Sea during the period from October 1972 to September 1973 were examined. Results of the study are summarized as follows: 1. Sex ratio of females to males was found to be 2:1. 2. Ring marks on the otolith were found to be formed twice a year, once during the period of January-May and the other time in September. 3. The Lee's phenomenon was observed on the otolith sample. 4. The relationship between the radius of otolith(R) and fork length(L) was found to be as follows: R=0.3069+0.0133L 5. Calculated fork length at the time of otolith ring formation are found to be as follows:I-ring,71.67mm; II-ring, 125.05mm; III-ring, 168.65mm; IV-ring, 201.74mm; V-ring, 225.80mm; VI-ring, 240.84mm. 6. Maximum fork length calculated according to the diagram of Walford's growth transformation was found to be 281.5mm. 7. Growth curve, when related to the von Bertalanffy's equation, was laid out as $L_{t}=281.5[1-e$^{-0.674(t-0.128)}]$

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.8
• /
• pp.385-393
• /
• 2008

The best coverage problem is finding a path whose worst distance to the sensor-set is the best among all paths. Instead, if the user stays close to its nearest two sensors, then the stability of the wireless connection may be guaranteed. So we consider the problem of finding a second best coverage path; given the sensor set U, a starting point s and a target point t, find a path whose worst distance to the second closest sensor is minimized. This paper presents an O(n logn) -time algorithm to find such a path. We also give experimental evidence showing that the connection to the sensor-set along a second best coverage path is more stable than that along the best coverage path.

• Geomechanics and Engineering
• /
• v.8 no.3
• /
• pp.461-476
• /
• 2015

Rankine's theory of earth pressure cannot be directly employed to c-${\phi}$ soils backfill with a sloping ground subjected to complex loadings. In this paper, an analytical solution for active earth pressures on retaining structures of cohesive backfill with an inclined surface subjected to surcharge, pore water pressure and seismic loadings, are derived on the basis of the lower-bound theorem of limit analysis combined with Rankine's earth pressure theory and the Mohr-Coulomb yield criterion. The generalized active earth pressure coefficients (dimensionless total active thrusts) are presented for use in comprehensive design charts which eliminate the need for tedious and cumbersome graphical diagram process. Charts are developed for rigid earth retaining structures under complex environmental loadings such as the surcharge, pore water pressure and seismic inertia force. An example is presented to illustrate the practical application for the proposed coefficient charts.

• Smart Structures and Systems
• /
• v.11 no.3
• /
• pp.241-259
• /
• 2013

This paper presents the optimum load-speed diagram evaluation for a linear micromotor, including multitude cantilever piezoelectric bimorphs, briefly. Each microbeam in the mechanism can be actuated in both axial and flexural modes simultaneously. For this design, we consider quasi-static and linear conditions, and a relatively new numerical method called the smoothed finite element method (S-FEM) is introduced here. For this purpose, after finding an optimum volume fraction for piezoelectric layers through a standard numerical method such as quadratic finite element method, the relevant load-speed curves of the optimized micromotor are examined and compared by deterministic topology optimization (DTO) design. In this regard, to avoid the overly stiff behavior in FEM modeling, a numerical method known as the cell-based smoothed finite element method (CS-FEM, as a branch of S-FEM) is applied for our DTO problem. The topology optimization procedure to find the optimal design is implemented using a solid isotropic material with a penalization (SIMP) approximation and a method of moving asymptotes (MMA) optimizer. Because of the higher efficiency and accuracy of S-FEMs with respect to standard FEMs, the main micromotor characteristics of our final DTO design using a softer CS-FEM are substantially improved.

• 한국연소학회:학술대회논문집
• /
• 2004.06a
• /
• pp.42-48
• /
• 2004

Lean laminar premixed propane and methane flames which were anchored by a hydrogen-pilot flame in a tube were investigated experimentally. The flame shapes were observed by varying mean velocity from 10cm/s to 140cm/s and equivalence ratio from 0.45 to 0.8. In this study, behaviors of flames are divided into five regions such as tail-out, flash-back, flickering, stable and vibrating flames with respect to the mean velocity and the equivalence ratio. Although the flames are unstable in both the flickering and the vibrating region, they have different characteristics such as the frequency, sound generation and creation process of flame curvature. The flickering region exists near the flammability limit and the flame flickers in a frequency of about 10Hz. When flame front is bended, the propane flame front is straightened and the methane flame front is bended more by thermo-diffusive instability. In the vibrating region, the flame vibrates emitting audible sound in a frequency of about 100Hz. In the boundary of vibrating region, the vibration of flame changes between two modes such as single frequency vibration and dual frequency vibration. Increase and decrease of vibration in each mode are determined by thermo-acoustic instability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3C
• /
• pp.264-270
• /
• 2006

In this paper, we propose the modified display color control system using white point line, boundary lines and S-shaped curves to emphasize blue and red tone colors on CIE1931 diagram. The proposed system divides RGB gamut into movable area and non-movable area by using boundary lines. The colors in movable area are moved into right side or left side along quadratic curve to change the bluish (or reddish) color to more bluish (or more reddish), while those in non-movable area are excepted from color control to prevent skin color from changing. The loci of the quadratic curves are very similar to the arc of the white-point line which connects all points that represent the chromaticities of a black body radiator at different temperatures and is also called the black body locus. The RGB gamut extension by movement of chromaticity coordinate can improve color reproducibility. Therefore in the case of application to LCD, the display shows excellent performance because the LCD's color reproducibility is comparatively lower than that of other display systems. The proposed system is also experimentally demonstrated with Xilinx Virtex FPGA XCV2000E- 6BG560 and the TV set.