• Journal of Information Display
• /
• v.12 no.3
• /
• pp.125-128
• /
• 2011

Alignment failure sometimes occurs during the rubbing process because the rubbing cloth comes in direct contacts with the surface of the alignment film. A number of researches observed and evaluated the surface of the alignment film after the rubbing process had been reported. The real-time rubbing process has not been observed directly yet, though. In this study, the movement of the piles of the rubbing cloth during the rubbing process was observed with a high-speed camera. Furthermore, the relationship between the rubbing scratch on the alignment films and the movement of the pile was investigated. It was found that the movement of the pile affected the rubbing scratches.

• Polymer(Korea)
• /
• v.35 no.5
• /
• pp.385-389
• /
• 2011

In rubbing process, process factors, the properties of alignment layer and the physical properties of rubbing cloth have acted as important variables. These factors affect the orientation properties of the alignment layer by rubbed extent that is determined by rubbing density and rubbing force. In this work, we studied the effects of rubbing cloths with different pile density and rigidity on rubbing density(length) and rubbing force. As the pile density and rigidity of rubbing cloths increased, the birefringence and the surface roughness of the rubbed alignment layers became bigger, but the characteristics of rubbing-effect had differed each other. The pile density of rubbing cloths which was related with the number of pile, affected the rubbing density(length). On the other hand, the pile rigidity of rubbing was closely related to rubbing force rather than the rubbing density(length).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.328-330
• /
• 2004

In order to stabilize the rubbing process for liquid crystal panels, the authors developed "the sparkling dot area ratio evaluation method". This method quantifies the fiber length dispersion of rubbing cloths, which is a major cause of mura defects. The newly developed method enables quantitative evaluation of rubbing cloths and contributes to the improvement of rubbing process uniformity.

• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.245-246
• /
• 2007

• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.52-60
• /
• 2013

Partially hydrolyzed cellulose acetate (CA) fibers were prepared by treating CA fibers in aqueous $Na_2CO_3$ solutions of various concentrations. The deacetylation of CA fibers was confirmed through FTIR spectra and WAXD patterns. The hydrolysis was confined to the surface part of the CA fiber by controlling the treatment conditions. The resultant fibers had a sheath-core structure with a sheath component of regenerated cellulose and a core of non-hydrolyzed cellulose acetate. The SEM images of the surface-hydrolyzed CA fibers, the core of which was dissolved out using acetone as the solvent, showed that the sheath thickness increased with increasing alkaline concentration, indicating an increase in the hydrolyzed fiber, i.e., regenerated cellulose. Polarized FTIR analysis of the polyimide film rubbed with velvet fabrics of surface-hydrolyzed CA fibers showed that polyimide molecules were preferentially oriented to the rubbing direction.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.41-41
• /
• 2008

In general, polyimides (PIs) are used in alignment layers in liquid crystal displays (LCDs). The rubbing alignment technique has been widely used to align the LC molecules on the PI layer. Although this method is suitable for mass production of LCDs because of its simple process and high productivity, it has certain limitations. A rubbed PI surface includes debris left by the cloth, and the generation of electrostatic charges during the rubbing induces local defects, streaks, and a grating-like wavy surface due to nonuniform microgrooves that degrade the display resolution of computer displays and digital television. Additional washing and drying to remove the debris, and overwriting for multi-domain formation to improve the electro-optical characteristics such as the wide viewing angle, reduce the cost-effectiveness of the process. Therefore, an alternative to non-rubbing techniques without changing the LC alignment layer (i.e, PI) is proposed. The surface of LC alignment layers as a function of the ion beam (IE) energy was modified. Various pretilt angles were created on the IB-irradiated PI surfaces. After IB irradiation, the Ar ions did not change the morphology of the PI surface, indicating that the pretilt angle was not due to microgrooves. To verify the compositional behavior for the LC alignment, the chemical bonding states of the ill-irradiated PI surfaces were analyzed in detail by XPS. The chemical structure analysis showed that ability of LCs to align was due to the preferential orientation of the carbon network, which was caused by the breaking of C=O double bonds in the imide ring, parallel to the incident 18 direction. The potential of non-rubbing technology for fabricating display devices was further conformed by achieving the superior electro-optical characteristics, compared to rubbed PI.

• Textile Coloration and Finishing
• /
• v.32 no.3
• /
• pp.128-134
• /
• 2020

Heat and flame protecting cloth is usually made of meta aramid fiber because of its own properties. But the high inter molecular hydrogen bonding and high Tg is the reason of the difficulty to dye meta aramid fiber. Recently, it was commercialized that the easily dyeable meta aramid fiber(AMD) for improving dyeability. In this study, the dyeing properties of AMD dyed with cationic dyes were investigated. The K/S values of AMD were 5~10% higher than these of general meta aramid fiber(AM) in the case of 1%owf caused by the lower crystallinity of AMD. The difference between K/S values of AMD and AM was increased as increasing dyeing concentration. The washing and rubbing fastness grade of AM and AMD were similar and good to very good.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.430-430
• /
• 2007

In general, polyimides (PIs) are used in liquid crystal displays (LCDs) as alignment layer of liquid crystals (LCs). Up to date, the rubbing alignment technique has been widely used to align liquid crystals on the PI surface, which is suitable for mass-production of LCDs because of its simple process and high productivity. However, this method has some disadvantages. Rubbed PI surfaces include the debris left by the cloth and the generation of electrostatic charges during rubbing process. Therefore, rubbing-free techniques for LC alignment are strongly required in LCD technology. In this experiment, PI was uniformly coated on indium-tin-oxide electrode substrates to form LC alignment layers using a spin-coating method and the PI layers were subsequently imidized at 433 K for 1 h. The thickness of the PI layer was set at 50 nm. The LC alignment layer surfaces were exposed to an $Ar^+$ ion-beam under various ion-beam energies. The antiparallel cells and twisted-nematic (TN) cells for the measurement of pretile angle and electro-optical characteristics were fabricated with the cell gap of 60 and $5\;{\mu}m$, respectively. The LC cells were filled with nematic LC (NLC, MJ001929, Merck) and were assembled. The NLC alignment capability on ion-beam-treated PI was observed using photomicroscope and the pretilt angle of the NLC was measured by the crystal-rotation method at room temperature. Voltage-transmittance (V-T) and response time characteristics of the ion-beam irradiated TN cell were measured by a LCD evaluation system.

• Journal of the Korean Society of Safety
• /
• v.39 no.2
• /
• pp.1-8
• /
• 2024

Unwanted effects of electrostatic phenomena occur in various industries. Electrostatic problems originating from the human body in flammable atmospheres in the industry are especially concerning. A substantial volume of experimental data on the electrostatic charging voltages created on the human body owing to the rubbing of apparel were generated and reviewed during this study. The data were reviewed to determine whether the resultant charging levels of the human body are hazardous in flammable atmospheres. This study was conducted under several conditions, such as different fiber types used in apparel, shoe types, and relative humidities (RHs). The following conclusions were drawn in this study. ① The electrostatic charging levels of the human body owing to the rubbing of apparel increase with the increase in the surface resistances of apparel; however, the electrostatic charging levels may be different depending on the condition of the cloth surface. ② The discharging energy of 1.98-18.5 [mJ] from the human body exceeds the minimum ignition energy of most flammable materials, when removing an overcoat made of polyester, cotton and wool under severe conditions such as wearing height-raising shoes for men. ③ When removing antistatic apparel, the maximum discharging energy of 0.128 mJ from the human body is dangerous if the minimum ignition energy of the flammable material is between 10^-5-10^-4 [J] Grade; however, a minimum ignition energy of 10^-3 J Grade of the flammable material is considered safe. ④ While wearing antistatic shoes, the electrostatic charging voltage generated in the human body when removing an overcoat is 30 V; therefore, wearing such shoes is a suitable countermeasure when handling flammable materials. However, the antistatic abilities of shoes reduce when thick socks are worn. ⑤ As RH increases, the electrostatic charging levels of the human body decrease. ⑥ The electrostatic charging levels of the human body from removing a cotton overcoat can ignite the majority of flammable materials when RH is less than 30% under severe conditions such as wearing height-raising shoes for men.

• Fashion & Textile Research Journal
• /
• v.19 no.3
• /
• pp.331-336
• /
• 2017

Bacteria exist everywhere and continuously come into contact with daily surroundings and humans. Super bacterium methicillin-resistant Staphylococcus aureus, resistant to methicillin, has recently appeared. The morbidity and rate of death associated with super bacteria infection has increased. This study investigated the antibacterial activity of fabrics naturally dyed with Chamaecyparis obtusa leaves extract against methicillin-resistant Staphylococcus aureus. Fabrics were left for 15 min in a natural dyeing solution prepared by extraction from C. obtusa leaves using 11.3% (o.w.f) with a fixed liquor ratio of 1:22 at $40^{\circ}C$. The dyeing process was conducted using three different mordants; subsequently, the K/S value of the dyed fabrics increased in the order of None < Cu < Fe < Al. The color fastness property of the fabrics to washing, dry-cleaning, and rubbing was found to be excellent and ranked in the 4-5 grade. The color fastness to light of natural dyeing is low in most cases and has the problem that the dye color soon becomes bleached. Yet, in most cases cloth dyed with retinispora leaves, the color fastnezz to light was good with a third to fourth grade. Non-mordant fabrics, aluminum mordants, and copper mordants also showed better antibacterial properties (99.9% reduction) against methicillin-resistant Staphylococcus aureus, compared to the control fabrics. The dyed fabrics showed the same antibacterial activity even after three washes. The results highlight the strong potential of fabrics naturally dyed with C. obtusa-extract as a medicinal material with excellent antibacterial function against methicillin-resistant Staphylococcus aureus.