• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1668-1671
• /
• 2005

Vulcanized natural rubber was pulverized using a single screw extruder in a non-cryogenic Solid Shear Extrusion process where rubber granulates were subjected to high compressive and shear stresses. The producted particles had diameters ranging from 40 to 1200$\{mu}m$. A principle used in this paper was developed in Russia. The development method for producing a polymeric material powder consists in compressing said material by shearing the material during a pressure increase and cooling. Consecutive breakdown is carried out by shearing the material during the pressure decrease and cooling.

• 대한금속재료학회지
• /
• 제50권5호
• /
• pp.389-393
• /
• 2012

Improvement in microwave absorbance has been investigated by insertion of a periodic air cavity in rubber composites filled with magnetic powders. A mixture of $Co_2Z$ hexagonal ferrite and Fe powders were used as the absorbent fillers in silicone rubber matrix. The complex permeability and complex permittivity of the magnetic composites were measured by reflection/transmission technique. In the grid-type magnetic absorbers, the equivalent permeability (${\mu}_{eq}$) and permittivity (${\varepsilon}_{eq}$) are calculated as a function of air volume rate (K) on the basis of effective medium theory. Reduction in the material parameters (especially, dielectric permittivity and magnetic loss) has been estimated with the increase of K. Plotting the ${\mu}_{eq}$ and ${\varepsilon}_{eq}$ on the solution map of wave-impedance matching, wide bandwidth microwave absorbance has been predicted in the magnetic composites with an optimum value of K.

• 한국재료학회지
• /
• 제29권9호
• /
• pp.532-541
• /
• 2019

Information and communication technologies are developing rapidly as IC chip size becomes smaller and information processing becomes faster. With this development, digital circuit technology is being widely applied to mobile phones, wireless LANs, mobile terminals, and digital communications, in which high frequency range of GHz is used. In high-density electronic circuits, issues of noise and EMC(Electro-Magnetic Compatibility) arising from cross talk between interconnects or devices should be solved. In this study, sheet-type electromagnetic wave absorbers that cause electromagnetic wave attenuation are fabricated using composites based on soft magnetic metal powder and silicon rubber to solve the problem of electromagnetic waves generated in wireless communication products operating at the frequency range of 2.4 GHz. Sendust(Fe-Si-Al) and carbonyl iron(Fe-C) were used as soft magnetic metals, and their concentrations and sheet thicknesses were varied. Using soft magnetic metal powder, a sheet is fabricated to exhibit maximum electromagnetic attenuation in the target frequency band, and a value of 34.2dB(99.9 % absorption) is achieved at the target frequency.

• Elastomers and Composites
• /
• 제41권1호
• /
• pp.49-56
• /
• 2006

Allylamine을 이용하여 UV하에서 폐타이어 분말을 개질하였으며, 이를 이용한 PP/폐타이어분말 복합체의 열적, 유변학적 성질을 분석하였다. X-ray 분석결과 무수말레 산이 그라프트된 폴리프로필렌과 같은 상용화제가 없는 경우 ${\beta}$ 결정의 피크 강도가 증가한 반면 상용화제가 있는 경우 완전히 없어짐을 알 수 있었으며, DSC 결과에서도 이를 확인할 수 있었다. 개질된 폐타이어 분말을 함유한 복합체의 용융점도와 탄성모듈러스는 개질되지 않은 분말을 함유한 복합체 보다 높은 값을 나타내었으며, 이는 개질된 분말 표면의 아민기와 말레이산이 그라프트된 PP의 상호작용에 기인하는 것으로 판단된다.

• 한국환경복원기술학회지
• /
• 제13권1호
• /
• pp.57-68
• /
• 2010

The purpose of this study is to analyze the characteristics of environment-friendliness of waterproof materials based on comprehensive experiments on waterproofness in terms of coefficients of permeability, harmfulness of waterproof materials and fish toxicity of Oryzias latipes mortality to verify eco-toxicity of each method of construction and waterproof material, which are to be applied by taking eco-toxicity into account when building ecological flows in upper areas on natural and artificial grounds. As a result, the following conclusions have been reached in this study: 1. In regard of the harmfulness analyzed, each material showed a different result of analytical value in each lab tank. Compared to input water, pH, COD, SS, T-P, and T-N values increased a little, but DO value decreased. The value of turbidity analyzed independent of the water quality standard of aquatic ecosystem set forth by the Ministry of Environment increased a little compared to the value in input water. 2. In the experiment of fish toxicity, compacted quicklime, cement fluid waterproof material, cement mortar waterproof material and bentonite powder were found to have 100% of fish mortality, respectively, and membrane waterproof material showed 83.3% of mortality, indicating strong fish toxicity. Improved asphalt sheet (63.3%) and synthetic rubber sheet (53.3%) were analyzed to have medium fish toxicity, while bentonite sheet (6.7%), Hwang-toh (6.7%) and clay (3.3%) showed relatively lower mortality and fish toxicity. 3. Regarding the analysis on waterproofness in terms of the coefficient of permeability of each waterproof material, improved asphalt sheet, synthetic rubber sheet, membrane waterproof material, cement fluid and mortar waterproof material and bentonite sheet were found impervious in case no leakage takes place in construction. Bentonite powder was found practically impervious based on the analytical results from the experiment done in compliance with weight ratios. So were the clay and Hwang-toh from the experimental results. To sum up such results as found in the experiment mentioned so far, the values of harmfulness and waterproofness analyzed were different in each lab tank, but there was absolutely little correlation with the mortality gained from the experiment on fish toxicity. In the experiment of fish toxicity, environment-friendly waterproof materials were analyzed, and it was found that clay, Hwang-toh and bentonite sheet are highly environment-friendly. In contrast, synthetic rubber and improved asphalt sheets were found to have medium-level environment-friendliness. Also, membrane water-proof materials, compacted quicklime, cement fluid and mortar waterproof material and bentonite powder were analyzed to have low environment-friendliness.

• 한국건설순환자원학회논문집
• /
• 제8권3호
• /
• pp.263-268
• /
• 2020

이 연구의 목적은 폐타이어 고무분말을 혼입한 폴리우레탄 복합재료와 굵은 골재를 사전채움하고 폴리우레탄을 주입한 폴리우레탄 복합재료의 감쇠성능을 평가하는 것이다. 이를 위하여 총 4 종류의 폴리우레탄 기반 복합재료를 제조하였고, 충격 가진 실험을 실시하였다. 실험을 통하여 시간 영역과 주파수 영역에서의 진동특성을 계측한 후 감쇠비를 계산하였다. 실험 결과, 고무분말을 혼입하여 폴리우레탄의 양이 각각 10.6%와 21.2% 줄어든 실험체들의 감쇠비는 순수한 폴리우레탄 실험체에 비하여 각각 8.4%와 4.6% 낮은 것으로 나타났다. 프리팩트 콘크리트 제조 방법과 유사한 방법으로 제조한 폴리우레탄 복합재료의 감쇠비는 순수 폴리우레탄에 비하여 22% 낮은 것으로 나타났지만 폴리우레탄 혼입량은 50% 감소하였으며, 강성은 25.7배 높은 것으로 나타났다.

• 공업화학
• /
• 제22권1호
• /
• pp.114-118
• /
• 2011

미네랄 오일을 결합재로 사용하는 탄소반죽전극은 효소의 특성 연구 분야에서 효과적으로 활용되고 있으나 전극이 기계적 경도가 없으므로 실용화의 가능성은 없다. 본 실험실에서는 톨루엔에 녹인 고무 용액이 탄소가루의 결합재로 사용될 때 탄소반죽의 기계적 물성이 얻어지는 것을 확인하였다. 클로로프렌 고무 용액을 이용하여 만든 전극이 정량적인 전기화학적 행동을 보이는지 확인하기 위하여 여러 가지 속도론적 파라메터 즉 대칭인자($\alpha$, 0.28), 교환전류밀도 ($i_0$, $4.06{\mu}A/cm^2$), 이중층의 축전용량($C_d$, $2.11{\times}10^{-3}F$), Michaelis 상수($K_M$, $2.45{\times}10^{-3}M$), 시간상수(${\tau}_B$, 0.077 sec) 등을 구하였다. 이 실험적 사실들은 클로로프렌 고무가 탄소반죽전극의 실용화에 전망 좋은 결합재임을 입증하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.885-886
• /
• 2011

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.927-929
• /
• 2014

MRE(Magneto-rheological Elastomer) is a material which shows reversible and various modulus in magnetic field. Comparing to conventional rubber vibration isolator, MREs are able to absorb broader frequency range of vibration. These characteristic phenomena result from the orientation of magnetic particle (i.e., chain-like formation). Magnetic reactive powder(MRP), having rapid magnetic reaction, was selected as a magnetic particle to give magnetic field reactive modulus. The mechanical properties of manufactured MREs were measured with the application of magnetic field. The analysis of MR effect was carried out by FFT analyzer with various induced current. As induced magnetic field intensity increased and coated with MRP, increment of MR effect was observed.

• Elastomers and Composites
• /
• 제50권4호
• /
• pp.245-250
• /
• 2015

Recycling of ethylene-propylene-diene terpolymer (EPDM) scrap was tried by blending with polypropylene (PP). EPDM scrap powder was prepared by shear pulverization process at high temperature, which may lead to selective chain scission induced by difference in the critical elastic coefficient. On the other hand, EPDM scrap powder was prepared by adding a selected reclaiming agent during shear pulverization process at high temperature. Terpene as a bonding agent was then introduced to improve adhesion property. PP, used as a matrix for manufacturing thermoplastic elastomer, was modified by the incorporation of dicumyl peroxide and maleic anhydride. The functionalized EPDM and modified PP were blended and cured dynamically at $190^{\circ}C$. The blend materials prepared in this study showed the comparable results to those of conventional TPE in terms of tensile and flow properties. Also, the odor component of recycled EPDM was analyzed using GC-MS.