• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.461-472
• /
• 2007

In Ubiquitous Sensor Network (USN), the sensor nodes are required to consume their energy evenly to prolong the lifetime of the entire sensor network because of the limited energy of the sensor node. AODV which is applied to USN as routing protocol selects route according to only the shortest distance of the minimum hop count but regardless of the remaining battery power for each node. Thus it comes to ill-balanced power consumption seriously. In this paper, a scheme that controls packet relay quantity of each sensor node adaptively to prevent traffic overhead at a certain node and to increase the entire network lifetime is proposed. As it is analyzed by simulations, the proposed scheme enhances USN lifetime by balancing each sensor node's packet relay quantity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.34-41
• /
• 2017

Wireless mesh networks contain multi-hop routing protocols between wireless nodes and are connected to the Internet through a gateway. These networks perform a role as a backbone and are scalable for main applications. We propose the design of QoS supporting mechanisms for wireless mesh networks using software defined networking. Our proposed scheme is cost-effective and features adaptive QoS mechanisms for wireless router's resource constraints. The QoS mechanisms use software defined networking technology with Openflow protocol based on diffserv and intserv models with MPLS mechanism and RSVP respectively. A performance evaluation model is suggested to verify the validity of the proposed scheme using several QoSmetrics of the wireless mesh networks.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.4
• /
• pp.497-507
• /
• 2018

Tactical networks are evolving into an All-IP based network for network centric warfare(NCW). Owing to the flexibility of IP based network, various military data applications including real-time and multi-media services are being integrated in tactical networks. Because each application has diverse Quality-of-service(QoS) requirements, it is crucial to develop a QoS provisioning method for guaranteeing QoS requirements efficiently. Conventionally, differentiated services(DiffServ) have been used to provide a different level of QoS for traffic flows. However, DiffServ is not designed to guarantee a specific requirement of QoS such as delay, loss, and bandwidth. Therefore, it is not suitable for military applications with a tight bound of QoS requirements. In this paper, we propose a multi-layer network virtualization scheme that allocates traffic flows having different QoS requirements to multiple virtual networks, which are constructed to support different QoS policies such as virtual network functions(VNFs), routing, queueing/active queue management(AQM), and physical layer policy. The experiment results indicate that the proposed scheme achieves lower delays and losses through multiple virtual networks having differentiated QoS policies in comparison with conventional networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3B
• /
• pp.144-152
• /
• 2005

Mobile IP(MIP) and SIP have been proposed to support mobility in the wireless internet working at different layers of the protocol stack. However MIP has some problems such as triangle routing, the need of each host's home address, the overhead of tunneling and the lack of wide deployment. Thus we proposed a scheme for supporting mobility based on SIP in this research. A novel SIP system to provide a hierarchical registration has been designed according to this scheme. Our SIP system has been established by implementing JAIN technologies which follow next generation network standards to support the mobility of wireless terminal. This system successfully satisfied ITU-T recommendation.

• Journal of Navigation and Port Research
• /
• v.29 no.8 s.104
• /
• pp.723-733
• /
• 2005

This paper presents a deadlock avoidance method for AGVs in automated container terminals. For a more efficient use of AGV traveling area, we divided the area into small-sized grids not enough to cover a whole AGV. Our deadlock avoidance method controls AGVs by identifying strongly connected components(SCCs) in a graph derived from the paths of AGVs on the grids. Also in this paper we suggest a route selection scheme which selects a route by predicting and comparing travel times of candidate routes by using a regression formula. Simulation experiments have shown that the proposed method can control AGVs for 48 hours without deadlocks and the count of AGV visits per QC is increased by $2\~10$ an hour.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1359-1370
• /
• 2009

In wireless sensor networks, data dissemination is based on data-centric routing that well matches the publish/subscribe communication paradigm. The publish/subscribe paradigm requires decoupling properties: space, time, and synchronization decoupling. For large-scale applications, the three decoupling properties provide scalability and robust communication. However, existing data dissemination schemes for wireless sensor networks do not achieve full decoupling. Therefore, we propose a novel data dissemination scheme that fully accomplishes the three decoupling, called ARBIETER. ARBITER constructs an independent network structure as a logical software bus. Information interworking between publishers and subscribers is indirectly and asynchronously performed via the network structure. ARBITER also manages storage and mapping of queries and data on the structure because of supporting different time connection of publishers and subscribers. Our simulation proves ARBITER show better performance in terms of scalability, network robustness, data responsibility, mobility support, and energy efficiency.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.10
• /
• pp.29-34
• /
• 2011

We present a network coding scheme which is designed for improving throughput in multi-hop wireless network with multi-radio multi-channel. The co-channel interference and unreliability of wireless transmissions cause the wireless network to reduce throughput. In wireless network, multi-radio multi-channel technology shows benefit to cut down channel interferences and contentions. And network coding can reduce the complexity of scheduling and improve throughput by increasing usage of links in wireless network. In this paper, we propose a method of channel assignment and transmission scheduling in intra-session network coding that efficiently improve throughput for multi-hop wireless network by using mathematical modeling and linear programming. Moreover, we evaluate the performance of the intra-session network coding scheme by using AMPL with CPLEX. The simulation results show that intra-session network coding can achieve better throughput than traditional routing.

• The Journal of the Korea Contents Association
• /
• v.6 no.2
• /
• pp.84-92
• /
• 2006

In this paper, we propose an efficient multicasting algorithm in multistage interconnection networks (MIN's) employing the region encoding scheme. The proposed algorithm uses the recursive scheme to recycle a multicast message at most two times through MIN, in order to send it to its desired destinations. It is composed of two recycling phases which are the copying phase and the routing phase of the multicast message. In the first phase, a source sends the message to a region that contains the largest number of destination regions, and destinations in these regions receive and store the message in this phase. The remaining destinations can finally receive the message in the second phase. This method of the algorithm can improve its performance by reducing the delay of message and the volume of traffic. Moreover, we evaluate the performance of our algorithm in terms of the average number of recycling and the number of internal links used per destination, comparing with the previously proposed algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12A
• /
• pp.1171-1180
• /
• 2010

In wireless sensor networks, reliable event detection is one of the most important research issues. For the reliable event detection, previous works usually assume the events are only individual objects such as tanks and soldiers. Recently, many researches focus on detection of continuous objects such as wild fire and bio-chemical material, but they merely aim at methods to reduce communication costs. Hence, we propose a reliable continuous object detection scheme. However, it might not be trivial. Unlike individual objects that could be referred as a point, a continuous object is shown in a dynamic two-dimensional diagram since it may cover a wide area and it could dynamically alter its own shape according to physical environments, e.g. geographical conditions, wind, and so on. Hence, the continuous object detection reliability can not be estimated by the indicator for individual objects. This paper newly defines the reliability indicator for continuous object detection and proposes an error recovery mechanism relying on the estimation result from the new indicator.

• Journal of KIISE:Information Networking
• /
• v.41 no.4
• /
• pp.177-185
• /
• 2014

It has been occurred many times that wireless sensor networks (WSNs) had congested areas because all the sensing data collected by multiple sensor nodes are delivered to one sink node. Typically, in order to control congested areas, it used to reduce the traffic by increasing the sensing period or discarding packets. However, those schemes have a disadvantage that it loses the reliability when delivering sensing data. Moreover, there are no schemes considering case of having poor quality of links between nodes in practical terms. In this paper, we suggest a scheme not to reduce the traffic but to distribute the traffic by changing routing paths depends on the traffic and the quality of links. Also, it can be seen that the reliability of delivering of the sensing data is improved with the experiments improving collection rates and shortening end-to-end delay.