• 한국소음진동공학회논문집
• /
• 제13권1호
• /
• pp.63-69
• /
• 2003

The ordinary differential equations governing free vibrations of elastic horizontally curved beams are derived, in which the effects of rotatory inertia and shear deformation as well as the effects of both vertical and torsional inertias are included. Frequencies and mode shapes are computed numerically for parabolic curved beams with the hinged-hinged, hinged-clamped and clamped-clamped ends. Comparisons of natural frequencies between this study and ADINA are made to validate the theories and numerical methods developed herein. The lowest three natural frequency parameters are reported. with and without the effects of rotatory inertia and shear deformation. as functions of the three non-dimensional system parameters: the horizontal rise to span length ratio. the slenderness ratio and the stiffness parameter.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.675-680
• /
• 2006

This paper deals with the flexural free vibrations of strip foundations. Based on dynamic equilibrium equations of a beam element resting on Winkler foundation, differential equations governing free vibration of strip foundation are derived, in which effects of rotatory inertia and shear deformation are included. For obtaining the natural frequencies, differential equations are solved by numerical methods. As the numerical results, relationships between natural frequencies and various strip parameters are obtained and presented in Tables and Figures.

• 한국안전학회지
• /
• 제17권1호
• /
• pp.99-104
• /
• 2002

아크축(arch axis)의 연장(extensibility) 및 회전관성(rotatory inertia)을 고려한 곡선보(curved beam)의 평면내(in-plane) 자유진동을 미분구적법(DQM)을 이용하여 다양한 경계조건(boundary conditions)과 굽힘각(opening angles)에 따른 진동수(frequencies)를 계산하였다. DQM의 결과를 다른 수치해석결과와 비교하였으며, DQM은 적은 요소(grid points)을 사용하여 정확한 해석결과를 보여주었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.942-947
• /
• 2004

The differential equations governing free, in-plane vibrations of stepped non-circuiar arches are derived as nondimensional forms including the effects of rotatory inertia, shear deformation and axial deformation. The governing equations are solved numerically to obtain frequencies and mode shapes. The lowest four natural frequencies and mode shapes are calculated for the stepped parabolic arches with hinged-hinged, hinged-clamped, and clamped-clamped end constraints. A wide range of arch rise to span length ratios, slenderness ratios, section ratios, and discontinuous sector ratios are considered. The effect of rotatory inertia and shear deformation on natural frequencies is reported. Typical mode shapes of vibrating arches are also presented.

• Structural Engineering and Mechanics
• /
• 제3권5호
• /
• pp.511-525
• /
• 1995

The differential equations governing in-plane free vibrations of the elastic, catenary arch with rotatory inertia are derived in Cartesian coordinates. Frequencies and mode shapes are computed numerically for such arches with unsymmetric axes, for both clamped-clamped and hinged-hinged end constraints. The lowest four natural frequency parameters are reported, with and without rotatory inertia, as a function of three nondimensional system parameters; the span to cord length ratio e, the slenderness ratio s, and the rise to cord length ratio f. Experimental measures of frequencies and mode shapes for several laboratory-scale catenary models serve to validate the theoretical results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.846-851
• /
• 2003

The differential equations governing free, in-plane vibrations of non-circular arches with non-uniform cross-section, including the effects of rotatory inertia, shear deformation and axial deformation, are derived and solved numerically to obtain frequencies. The lowest four natural frequencies are calculated for the prime parabolic arches with hinged-hinged, hinged-clamped, and clamped-clamped end constraints. Three general taper types for rectangular section are considered. A wide range of arch rise to span length ratios, slenderness ratios, and section ratios are considered. The agreement with results determined by means of a finite element method is good from an engineering viewpoint.

• 오토저널
• /
• 제9권1호
• /
• pp.49-56
• /
• 1987

This study is a part f the research on the coupled vibration of train wheel with stepped thickness and rail. The research was conducted for the purpose of examining the dynamic characteristics of train wheel which considered the effect of rotatory inertia and preventing the vibrations of the high speed railway. The In-plane compressive stresses were computed by the rotation of train wheel and the reaction depending on the condition of rolling. The equation of transverse vibration of the train wheel was obtained by Lagrange's equation. As a result of study, it is known that the effect of rotatory inertia and the increment of thickness ratio, h over bar decrease frequency but the increment of radius ratio, r over bar increase frequency.

• Structural Engineering and Mechanics
• /
• 제2권4호
• /
• pp.345-357
• /
• 1994

The differential equations governing free, in-plane vibrations of linearly elastic circular arches with variable cross-sections are derived and solve numerically for quadratic arches with three types of rectangular cross sections. Frequencies, mode shapes, cross-sectional load distributions, and the effects of rotatory inertia on frequencies are reported. Experimental measurements of frequencies and their corresponding mode shapes agree closely with those predicted by theory. The numerical methods presented here for computing frequencies and mode shapes are efficient and reliable.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.394.1-394
• /
• 2002

The purpose of this paper is to investigate the natural frequencies and mode shapes of tapered beams with general boundary condition(translational and rotational elastic support) at one end and carrying a tip mass of rotatory inertia at the other end. The beam model is based on the classical Bernoulli-Euler beam theory which neglects the effects of rotatory inertia and shear deformation. (omitted)

• 소음진동
• /
• 제10권2호
• /
• pp.353-360
• /
• 2000

Numerical methods are developed for calculating the natural frequencies and mode shapes of the tapered cantilever arches with variable curvature. The differential equations governing the free vibrations of such arches are derived and solved numerically, in which the effect of rotatory inertia is included. The parabolic shape is chosen as the arch with variable curvature while both the prime and quadratic arched members are considered as the tapered arch with variable curvature while both the prime and quadratic arched members are considered as the tapered arch. Comparisons the natural jfrequencies between this study and finite element method SAP 90 seve to validate the numerical method developed herein. The lowest four natural frequencies are reported as a function of four non-dimensional system parameters. The effects of both the rotatory inertia and cross-sectional shape are reported. Also, the typical mode shapes of stress resultants as well as the displacements are reported.