• 한국조리학회지
• /
• 제19권3호
• /
• pp.291-304
• /
• 2013

본 연구는 호텔산업에서 종업원이 차지하는 중요성에 기초하여, 기업의 제안된 직원가치(EVP: Employee Value Proposition)와 직무순환의 중요도가 주관적 경력성공에 미치는 영향을 분석하였다. 본 연구의 설문조사는 서울 지역 특 1, 2급 호텔에 근무하는 종업원을 대상으로 편의표본추출을 하였고, 유효표본 379명의 자료가 실증분석에 사용되었다. 요인분석결과, EVP의 요인으로 '성장개발,' '상호신뢰,' '근무환경,' '역량인정' '급여와 보상' 등 5개 요인이, 직무순환의 요인으로 '개인의 발전과 효용성,' '운영절차,' '경력관리' 등 3개 요인이 각각 도출되었다. EVP와 주관적 경력성공에 대한 가설검증 결과 EVP의 5개 요인 중 '급여와 보상'을 제외한 모든 요인이 주관적 경력성공에 영향을 미치는 것으로 나타났다. 또한 EVP가 직무순환에 미치는 영향을 조사한 결과도 '급여와 보상'을 제외한 EVP의 요인이 주관적 경력성공에 유의한 영향을 미치는 것으로 나타났다. 마지막으로, 직무순환이 주관적 경력성공에 미치는 영향을 파악한 결과, 직무순환의 하위 요소인 '개인의 발전과 효용성', '운영절차', '경력관리' 모두 주관적 경력 성공에 영향을 미치는 것으로 나타났다. 이러한 연구결과는 주관적 경력성공 및 직무순환의 인식에 있어 종업원들은 금전적인 보상 보다는 비금전적 보상에 의해 영향을 받는다는 것을 의미한다. 연구결과를 바탕으로 연구결과가 갖는 학문적, 실무적 시사점(예, 조직문화의 창출)이 결론 부분에 제시되었다.

• 대한전자공학회논문지SD
• /
• 제41권2호
• /
• pp.17-25
• /
• 2004

디지털 흘로그래픽 정보 저장을 위한 새로운 데이터 매트릭스 구조와 이 구조를 통해 정보 추출할 수 있는 알고리즘을 제안하고 구현하였다 제안된 데이터 매트릭스 구조는 실제 사용자 정보와 기하학적 변형에 따른 raw BER을 줄이기 위한 참조 격자로 이루어져있고, 정보를 추출하는 알고리즘은 찬조격자의 위치를 판별하고 이 정보로부터 실제 사용자 정보를 추출하는 구조로되어 있다. 실험 결과 영상 이동, 회전, 배율변화에 대해 각각 3.09×10-18, 6.14×10-12, 1.2×10-7 의 평균 raw BER을 얻음으로서, 기하학적 변형에 대한 우수한 검출특성을 갖고 있음이 증명되었다.

• 한국멀티미디어학회논문지
• /
• 제4권3호
• /
• pp.215-221
• /
• 2001

본 논문에서는 사이즈 펑션을 이용하여 윤곽선으로 표현된 물체의 특징을 추출할 때 발생하는 에러를 줄이기 위해 방향에 따라 가중값을 달리하는 새로운 표본화 알고리즘을 제안했다. 특히 회전, 이동, 크기 변환과 같은 변환에 대해서 불변성을 갖도록 설계했다. 특징값은 물체의 윤곽선을 사이즈 펑션 처리를 통해서 만들어진 행렬이고 이들간의 거리를 측정 비교함으로써 본 논문에서 제안한 방법이 효과적임을 보였다. 실험 결과 기존의 표본화 방법보다 제안한 표본화 방법을 사용했을 때 원본과 변형된 이미지 사이의 유클리디언 거리가 회전에 대해서 약 57% 크기변형에 대해서는 약 91% 개선되었다.

• 천문학회보
• /
• 제41권2호
• /
• pp.62.2-62.2
• /
• 2016

We present a newly developed algorithm based on a Bayesian method for 2D tilted-ring analysis of disk galaxies which operates on velocity fields. Compared to the conventional ones based on a chi-squared minimisation procedure, this new Bayesian-based algorithm less suffers from local minima of the model parameters even with high multi-modality of their posterior distributions. Moreover, the Bayesian analysis implemented via Markov Chain Monte Carlo (MCMC) sampling only requires broad ranges of posterior distributions of the parameters, which makes the fitting procedure fully automated. This feature is essential for performing kinematic analysis of an unprecedented number of resolved galaxies from the upcoming Square Kilometre Array (SKA) pathfinders' galaxy surveys. A standalone code, the so-called '2D Bayesian Automated Tilted-ring fitter' (2DBAT) that implements the Bayesian fits of 2D tilted-ring models is developed for deriving rotation curves of galaxies that are at least marginally resolved (> 3 beams across the semi-major axis) and moderately inclined (20 < i < 70 degree). The main layout of 2DBAT and its performance test are discussed using sample galaxies from Australia Telescope Compact Array (ATCA) observations as well as artificial data cubes built based on representative rotation curves of intermediate-mass and massive spiral galaxies.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.244-246
• /
• 2001

In a full digital implementation of a current regulator, the voltage output is inevitably delayed due to arithmetic calculation and PWM. In case of the synchronous frame current regulator, the time delay is accompanied by the rotation of frame. In some applications in which the ratio of sampling frequency to output frequency is not high enough, such as high power drive or super high-speed drive, it is known that the effect of rotation of frame during the delay time causes phase and magnitude error in the voltage output. The error degrades the dynamic performance and can bring about the instability of current regulator at high speed. It is also intuitively known that advancing the phase of voltage output can mitigate the instability. In this paper, the instability problems are studied analytically and a compensation method for the error has been proposed. By means of computer simulation and complex root locus analysis, comparative study with conventional methods is carried out and the effectiveness of proposed method is verified.

• 대한기계학회논문집
• /
• 제18권5호
• /
• pp.1310-1321
• /
• 1994

Turbulent coherent structures in the intermediate wake of a stationary and rotating cylinder, spin rate S=0.7, situated in a uniform were experimentally investigated using a conditionalphase average technique. Measurements were carried out at a section of 8.5 diameters downstream form the center of cylinder and a Reynolds number of $Re=6.5{\times}10^{3}.$/TEX> The phase averaged velocity and velocity vector fields, contours of vorticity, turbulent intermittency function and velocity fluctuation energy are presented and discussed in relation to the large scale coherent structures by Karman vortices that shed periodically from the cylinder. Coherent wake structures of the rotating cylinder is almost identical with stationary cylinder, but the lateral displacement and shrinkage of turbulent wake region is occured by rotation. Rotation of the cylinder result in that the deflection of wake center to deceleration region(Y/D${\simeq}-0.3)$ and the decrease of mean velocity defect(10%), vorticity strength of large scale structures(19%), total velocity fluctuation energy(12%).

• 한국운동역학회지
• /
• 제21권2호
• /
• pp.141-152
• /
• 2011

The purpose of this study was to investigate the projectile factors and biomechanical characteristics of men's hammer throwing during turning phases. Four national leveled athletes including Korea national record holder participated in this study. After full warm-up, each participant performed 6 trials of hammer throwing with their best. The best recorded trial was selected from each participant and they were analyzed for this study. Three-Dimensional motion analysis using a system of 5 video cameras at a sampling frequency 60Hz was performed for this study. As the number of turns increased, athletes revealed following characteristics. 1) The single and double support time decreased. 2) The rotation foot was closed to axis foot and it revealed greater medio-lateral displacement than that of horizontal one. 3) At the transition point from double support to single support, ball was in front of rotation foot so that not much angular velocity obtained. For the projectile factors, projectile angle did not show differences while projectile height and velocity revealed differences among the participants. It may indicated that each athlete has different fitness and skill level to resist centrifugal force which become larger as the number of turn increased.

• 대한물리의학회지
• /
• 제19권1호
• /
• pp.61-68
• /
• 2024

PURPOSE: This study aimed to provide basic clinical data by analyzing the impact of motion observation training and stretching exercises for improving postures on the neck alignment and balance of stroke patients to enable them to accurately recognize the correct exercise method. METHODS: After sampling 20 stroke patients who met the selection criteria, this study randomly assigned 10 people who were administered the stretching exercise with observation training to the experimental group and 10 who received only the stretching exercise intervention to the control group by drawing lots. Next, neck alignment and balance were pre-tested. All interventions were conducted for 30 minutes, 3 times a week for 4 weeks, and when all the interventions were completed after 4 weeks, neck alignment and balance were re-measured in the same way as the pre-test. RESULTS: The comparison of changes in neck alignment and balance within the experimental and control groups showed statistically significant differences in the craniovertebral angle, cranial rotation angle, and balance (p < .05) (p < .01). Between the groups, statistically significant differences were found in the craniovertebral angle, cranial rotation angle, and balance (p < .05) (p < .01). CONCLUSION: A statistically significant difference in neck alignment and balance was observed in the group that underwent stretching exercises combined with observational training and a statistically significant difference was found between the groups. Therefore, it is believed that observation training should be used in clinical practice to improve forward head posture and restore balance in stroke patients.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1145-1148
• /
• 2002

This paper presents a new method which is calculated to use only three vanishing points in order to compute the dimensions of object and its pose from a single image of perspective projection taken by a camera and the problem of recovering 3D models from three vanishing points of box scene. Our approach is to compute only three vanishing points without this information such as the focal length, rotation matrix, and translation from images in the case of perspective projection. We assume that the object can be modeled as a linear function of a dimension vector ν. The input of reconstruction is a set of correspondences between features in the model and features in the image. To minimize each the dimensions of the parameterized models, this reconstruction of optimization can be solved by the standard nonlinear optimization techniques with a multi-start method which generates multiple starting points for the optimizer by sampling the parameter space uniformly.

• 전기학회논문지
• /
• 제61권11호
• /
• pp.1695-1699
• /
• 2012

This paper is proposed all digital wide-range clock and data recovery circuit. The Proposed clock data recovery circuit is possible input data rate which is suggested is wide-range that extends from 100Mb/s to 3Gb/s and used an phase error detector which can use a way of over-sampling a data by using a 1/2-rate multi-phase clock and phase rotator which is regular size per $2{\pi}$/16 and can make a phase rotation. So it could make the phase rotating in range of input data rate. Also all circuit is designed as a digital which has a specificity against a noise. This circuit is designed to 0.13um CMOS process and verified simulation to spectre tool.