• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.207-211
• /
• 2001

Revision and establish of KS(Korean Standards) is currently actively discussed. It is just the time for a new world class standards under the new system with WTO(World Trade Organization). This paper is a part of "Researchs on the Standards in Railway rolling stock Field", as one of KS establish projects. The aim of this study is to define the requirements of railway rolling stock-designs, manufacture, and test methods for automatic complex coupler. In the former KS, there is no items matched with this purpose. Therefore a new part of KS is proposed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.423-430
• /
• 2002

This study was started to develop maintenance technology for wheel tread suitable domestic railway environment. As a pre-study to develop optima] wheel tread, we analyzed the wear characteristics of wheel tread that is being applied to railway rolling-stock in KNR. To analyze wheel wear characteristics. we have conducted the simulation and experiment for passenger rolling-stock and obtained useful datum. Here, we describe some results.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.628-633
• /
• 2003

Recently, the electronic circuit with microprocessor based control system instead of conventional analog circuit is widely used for rolling stock, and also these circuits are widely adopted for train control and monitoring in modem rapid transit system. Noise, distortion and attenuation are always present in electronic equipments and strictly limit performance. The purpose of this paper is to propose noise reduction technology for electronic equipments in rolling stock.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.150-155
• /
• 2002

En case of the fatigue life evaluation of rolling stock structures, mainly deterministic fatigue life evaluation has been carried out. But most of the parameters influencing on the fatigue life have a probabilistic distribution such as normal, log-normal, Weibull, etc. Therefore, to take probabilistic factors into fatigue life evaluation, probabilistic methods are being applied to the fatigue life evaluation of rolling stock. In this paper, probabilistic S-N analysis and methods using limit state functions are introduced. And some results of fatigue life evaluation obtained with these methods for rolling stock structures are shown.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.368-375
• /
• 1999

This paper describes the evaluation methods and criteria used verify field performance of automatic multi-coupler for the PMC rolling stock. Automatic multi-coupler was designed and manufactured by KRRI , Woojin electric machinery CO., and Yujinchajeon MFG.CO., LTD in 1999. Through field performance test of PMC rolling stock, vibration, brake system, assembly and disassembly of complex train were measured on the condition of service operation. As a result, test results meet the criteria proposed by KNR and KRRI.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2910-2916
• /
• 2011

Environmental conservation is becoming the major conversation topic in the 21st century, the era of environment. In the Law for the Preservation of Water Quality, article 53 states "A business unit which is doing business causing pollution caused by non-point pollutant or builds waste water discharge facilities, should report the installation of the non-point pollutant and install the required pollution control facilities". Environmental pollution caused by oil leaks during operation or maintenance has been found in the railway sector. Especially, rolling stock depot is most likely to be affected by environmental pollution. Therefore, in this paper We have investigated non-point pollutant in the rolling stock depot area and have studied adequate disposal method to minimize the effect of the non-point pollutant, hoping to supply the preliminary data for building an environment-friendly rolling stock depot.

• Journal of Welding and Joining
• /
• 제23권1호
• /
• pp.35-40
• /
• 2005

In this paper, static and fatigue load tests for the specimens, components and carbody were carried out to investigate the strength of welded joints in aluminum rolling stock. Tensile test results showed that the static strength of welded joint for the heat-treated alloy is reduced significantly and fatigue strength data are scattered by the welding imperfections. Component and whole carbody fatigue test results showed agreements with the design fatigue strength standards for specimens of the same joint detail. Test results revealed that full penetration welding and strict management of welding procedure are crucial for securing the strength of welded joint in aluminum carbody.

• 전기학회논문지P
• /
• 제54권4호
• /
• pp.192-197
• /
• 2005

This paper presents a development of the auxiliary power supply simulator for a electric rolling stock. An auxiliary power supplies are required for operating air conditioning units, ventilation fans, lighting and battery charging. Traditionally this function has been fulfilled by Motor-Alternator sets. In recent years, high performance of semiconductor and micro processor, availability and price have made three phase voltage source inverters as an attractive alternative to MA Sets. From the baseline model of the SIV(Static InVerter) for electric rolling stock, we designed the scale down model of the auxiliary power supply simulator consisting of an IGBT three phase voltage source inverter. The auxiliary power supply simulator can be used educatory purpose for training efficiently about operating principles of SIV.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.171-178
• /
• 2001

Air spring for railway rolling-stock is a part of secondary suspension system which play the role of supporting load, damping vibration. Recently, air springs are actively applied to railway rolling-stock to substitute coil spring with upgrading the manufacturing skill. This study is started to get the fundamental datum related to air spring for the purpose of developing the test draft for air spring. To analyze the performance of air spring, we conducted the simulation for railway rolling-stock applied air spring and tested train in convention lines. Thus, we have obtained useful datum to develop the test draft for air spring. Here, we describe some results.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2094-2100
• /
• 2008

The indoor PMV(Predicted Mean Vote) in rolling stock is very important for the enhancement of the amenity and health of passengers. Many researchers have studied it not for train but for building. Thermal comfort in Rolling Stock is function of temperature, relative humidity, air current, radiation temperature, etc. So, in this study, we have performed thermal environment in rolling stock(Electric motor car, Saemaeul, Mugunghwa train), and verified the relation between the PMV from Nov.2007 and Feb.2008. As a result, the average PMV value for each trains are 0.2, -0.3 Electric motor car, 0.5, 0.1, 0.1, 1.1 for Mugunghwa, 0.3, 0.5 for Saemaeul.