• 한국전산유체공학회지
• /
• 제9권1호
• /
• pp.1-9
• /
• 2004

Large eddy simulation is used to investigate the compressible flow over a cavity with high aspect ratio. The sub-grid scale stresses are modeled using the dynamic model. The compressible Navier-Stokes equations are solved with the sixth order accurate compact finite difference scheme in the space and the 4th order Runge-Kutta scheme in the time. The buffer Bone techniques are used for non-reflecting boundary conditions. The results show the shear layer oscillation over the cavity. The votical disturbances, the roll-up of vorticity, and impingement and scattering of vorticity at the downstream cavity edge can be seen in the shear layer. Several peaks for the resonant frequencies are found in the spectra of the vertical velocity at the center-line. The most energetic Peak near the downstream edge is different from that at the center part of the cavity The pressure has its minimum value in the vortex core inside the cavity, and becomes very high at the downstream face of the cavity. The variation of the model coefficient predicted by the dynamic model is quite large between 0 and 0.3. The model coefficient increases in the stream-wise evolution of the shear layer and sharply decreases near the wall due to the wall effect.

• 한국추진공학회지
• /
• 제7권1호
• /
• pp.40-48
• /
• 2003

큰에디모사기법을 사용하여 압축성 공동유동을 수치해석하였다. Dynamic 모델을 사용하여 모델상수를 구했으며 공간으로 6차 유한차분기법, 시간에 대하여 4차 Runge-Kutta 수치기법을 사용하였다. 공동 주위의 유동을 보면 중심선을 따른 전단유동의 발달, 에디의 발생과 소멸 현상을 잘 볼 수 있었다. 유동결과로부터 예측된 공진 주파수는 Rossiter의 실험식 결과와 비교적 잘 일치하였다. 평균 유선의 분포는 공동의 중심선을 따라서 평행하였으며 공동 내부 후반부에서 압력이 급격히 감소됨을 알 수 있었다.

• 한국소음진동공학회논문집
• /
• 제13권10호
• /
• pp.785-790
• /
• 2003

This paper presents an approach to optimally design the air-hearing surface (ABS) of the optical flying head for near-field recording technology (NFR) NFR is an optical recording technology using very small beam spot size by overcoming the limit of beam diffraction. One of the most important problems in NFR Is a head disk interface (HDI) issue over the recording band during the operation. A multi-criteria optimization problem is formulated to enhance the flying performances over the entire recording band during the steady state. The optimal solution of the slider, whose target flying height is 50 nm, is automatically obtained. The flying height during the steady state operation becomes closer to the target values than those for the Initial one. The pitch and roll angles are also kept within suitable ranges over the recording band. Especially. all of the all-hearing stiffness are drastically increased by the optimized geometry of the air hearing surface.

• 한국조리학회지
• /
• 제12권4호
• /
• pp.116-130
• /
• 2006

This research was accomplished to analyze the preference and the actual using patterns of the bakery products using functional ingredients by subjects' age. This survey was examined by the self-administered questionnaire method for 374 female subjects in Suwon. All respondents preferred breads than confectionaries with functional ingredients. As for the products of cooking ingredients, cookies, roll-cake, cake, chocolate, the preference of teenagers was higher than those of the other groups. Subjects preferred potatoes, fruits, rice and green tea as functional ingredients. Over thirties showed the high preference over beans, vegetables, mushrooms, ginseng and oriental herbs while fruits were highly preferred in teenagers and twenties. The ratio of using the bakery products with functional ingredients once or twice a week was higher in over thirties than those of the other groups. Subjects answered that they generally spent $3,000won\sim5,000won$ on those products. Functionality of products was considered as the more important factor in thirties than in the other groups. The lack of information about these products and functional ingredients was reported by teenagers and twenties. These results would be basic data for marketing or improvement of baking products with functional ingredients.

• 대한방사선치료학회지
• /
• 제26권1호
• /
• pp.69-76
• /
• 2014

목 적 : 외부 압박을 통해 전립선암 환자의 복강 내 압력을 안정화시켜 움직임을 감소하여 치료 간(interfraction)과 치료 중(intrafraction)에 변화를 측정하여 평가하고자 시행하였다. 대상 및 방법 : 10명의 전립선환자들은 전체 치료과정동안 MVCT 스캔을 통해 치료 전과 후에 걸쳐 환자 당 60개의 영상을 획득하였고 획득한 좌우방향(X), 상하방향(Y), 전후방향(Z), 회전방향(Roll)에 대한 Shift 값들을 이용하여 복부 압박 시 치료 간 치료준비 변화와 치료 중 표적 움직임의 상호 연관성을 분석하였다. 결 과 : 치료 간의 움직임 변화는 평균 좌우방향(X)에서 $0.65{\pm}2.32mm$, 상하방향(Y)에서 $1.41{\pm}4.83mm$, 전후방향(Z)에서 $0.73{\pm}0.52mm$, 회전방향(Roll)에서 $0.96{\pm}0.21^{\circ}$로 나타났다. 치료 중 움직임 변화는 평균 좌우방향(X)에서 $0.15{\pm}0.44mm$, 상하방향(Y)에서 $0.13{\pm}0.44mm$, 전후방향(Z)에서 $0.24{\pm}0.64mm$, 회전방향(Roll)에서 $0.1{\pm}0.9^{\circ}$로 나타났다. 결 론 : 전처치과정과 외부에서 복부압박을 통한 전복부의 움직임을 제한한다면 치료동안에 내부 장기와 환자의 움직임을 감소시켜 보다 적은 여유(margin)로 계획용 표적체적(PTV)을 생성할 수 있어서 정상조직의 부작용 증가 없이 더욱 이상적인 선량 체적을 얻을 수 있을 것으로 사료된다.

• 대한원격탐사학회지
• /
• 제33권4호
• /
• pp.351-358
• /
• 2017

A new method to decompose the footprints of marine atmosphere boundary layer (MABL) on Synthetic Aperture Radar (SAR) imagery into characteristic spatial scales is proposed. Using two-dimensional Empirical Mode Decomposition (EMD) we obtain three Intrinsic Mode Functions (IMFs), which mainly present longitudinal rolls, three-dimensional cells and atmospheric gravity waves (AGW). The rolls and cells have spatial scales between 3.0 km and 3.8 km and between 5.3 km and 7.1 km, respectively. Based on previous observations and mixed-layer similarity theory, we estimated MABL's depths that vary from 0.95 km to 1.2 km over the rolls and from 3.0 km to 3.8 km over the cells. The AGW has maximum spectrum at 14.3 km wavelength. The method developed in this work can be used to decompose other satellite imageries into individual features through characteristic spatial scales.

• 한국공작기계학회논문집
• /
• 제13권6호
• /
• pp.87-93
• /
• 2004

An experimental is carried out to investigate the characteristics of blanking for nickel alloy Alloy42 (t=0.203mm), a kind of IC lead frame material. By varying clearance between die and punch the shapes of shear profile are examined. Finite element analysis with element deletion algorithm for ductile fracture mode is also carried out to study the effect of clearance theoretically and to compare with experimental results. The rectangular shape specimen with four different comer radius is used to study the characteristics of blanking for straight side and comer region simultaneously. As the result the ratios measured k(m experiment of roll over, burnish and fracture zone based on initial blank thickness are compared with those of FE analysis. Both experiment and FE analysis show that the amount of mil over and fracture is increased as the clearance increases. When the radius of comer is less than thickness of blank it has been found that larger clearance is required than that of straight region in order to maintain same quality of shear profile at the comer region.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.194-200
• /
• 2007

The tilting train is able to tilt its body towards the center of the turning radius, preventing roll-over of the train as it runs on a curved rail at high-speed. This train, widely accepted for commercial purpose internationally is very beneficial in that the operating time is shortened without much capital investment to the infrastructure where there are many curved rails. Over several years, the Korea Railroad Research Institute(KRRI) has developed such a train. In this paper, the safety of the Korean tilting train express(TTX) is investigated using a dynamic simulation model. Since, proper safety standards have not been established for the TTX, those for the Korean train express(KTX) is employed instead to analyze the safety and ride comfort of the TTX. This study will prove useful in predicting the behavior of the TTX and ride comfort, and conforming that designed TTX measures up to the safety standards. It would be useful to recommend proper normal operating speed and determine the maximum safety speed, according to the result. Furthermore, it would be possible to provide basic reference data when analyzing the dynamic effect of the catenary system and the fatigue of the bogie.

• Journal of Information Processing Systems
• /
• 제16권5호
• /
• pp.1145-1157
• /
• 2020

A convolution neural networks (CNNs) has demonstrated outstanding performance compared to other algorithms in the field of face recognition. Regarding the over-fitting problem of CNN, researchers have proposed a residual network to ease the training for recognition accuracy improvement. In this study, a novel face recognition model based on game theory for call-over in the classroom was proposed. In the proposed scheme, an image with multiple faces was used as input, and the residual network identified each face with a confidence score to form a list of student identities. Face tracking of the same identity or low confidence were determined to be the optimisation objective, with the game participants set formed from the student identity list. Game theory optimises the authentication strategy according to the confidence value and identity set to improve recognition accuracy. We observed that there exists an optimal mapping relation between face and identity to avoid multiple faces associated with one identity in the proposed scheme and that the proposed game-based scheme can reduce the error rate, as compared to the existing schemes with deeper neural network.

• 융복합기술연구소 논문집
• /
• 제2권1호
• /
• pp.1-6
• /
• 2012

The cold chain system in South-East Asia is requiring to maintain freshness of refrigerated or frozen food. In this study, Thermal storage system using Phase change material (PCM) was developed and evaluated its performance about temperature and cold keeping time. For various application of cold chain system, we developed portable cold box, cold roll container and freezing station. Keeping time on laboratory tests of portable cold box in case of refrigeration and freezing were 6 hours and 4 hours, respectively. Cold container was developed to 2.5 ton scale. Evaluation in Indonesia, it was showed to keep the setting temperature of $-10^{\circ}C$ over 40 hours at $30^{\circ}C$ of ambient air. Freezing station using PCM was kept over 24 hours under $-20^{\circ}C$.