• Geomechanics and Engineering
• /
• 제15권5호
• /
• pp.1125-1133
• /
• 2018

Real-time characterization of the rock thermal deformation and fracture process provides guidance for detecting and evaluating thermal stability of rocks. In this paper, time -frequency characteristics of acoustic emission (AE) and electromagnetic radiation (EMR) signals were studied by conducting experiments during rock continuous heating. The coupling correlation between AE and EMR during rock thermal deformation and failure was analyzed, and the microcosmic mechanism of AE and EMR was theoretically analyzed. During rock continuous heating process, rocks simultaneously produce significant AE and EMR signals. These AE and EMR signals are, however, not completely synchronized, with the AE signals showing obvious fluctuation and the EMR signals increasing gradually. The sliding friction between the cracks is the main mechanism of EMR during the rock thermal deformation and fracture, and the AE is produced while the thermal cracks expanding. Both the EMR and AE monitoring methods can be applied to evaluate the thermal stability of rock in underground mines, although the mechanisms by which these signals generated are different.

• Geomechanics and Engineering
• /
• 제16권5호
• /
• pp.483-493
• /
• 2018

Experimental study of the deterioration of high-temperature rock subjected to rapid cooling is essential for thermal engineering applications. To evaluate the influence of thermal shock on heated granite with different temperatures, laboratory tests were conducted to record the changes in the physical properties of granite specimens and the dynamic mechanical characteristics of granite after rapid cooling were experimentally investigated by using a split Hopkinson pressure bar (SHPB). The results indicate that there are threshold temperatures ($500-600^{\circ}C$) for variations in density, porosity, and P-wave velocity of granite with increasing treatment temperature. The stress-strain curves of $500-1000^{\circ}C$ show the brittle-plastic transition of tested granite specimens. It was also found that in the temperature range of $200-400^{\circ}C$, the through-cracks induced by rapid cooling have a decisive influence on the failure pattern of rock specimens under dynamic load. Moreover, the increase of crack density due to higher treatment temperature will result in the dilution of thermal shock effect for the rocks at temperatures above $500^{\circ}C$. Eventually, a fitting formula was established to relate the dynamic peak strength of pretreated granite to the crack density, which is the exponential function.

• Composites Research
• /
• 제18권1호
• /
• pp.23-29
• /
• 2005

본 연구에서는 몬모릴로나이트(montmorillonite, MMT)의 오존처리가 몬모릴로나이트의 표면특성과 폴리프로필렌(polypropylene, PP) 나노복합재료의 열안정성에 미치는 영향에 대하여 살펴보았다. MMT의 표면 특성은 XRD, FT-IR 그리고 XPS를 통해 관찰하였고, 나노복합재료의 열안정성은 열중량 분석기(TGA)를 이용하여 조사하였다 실험 결과, 실리케이트의 층간 간격은 유기적으로 개질된 MMT(D-MMT)가 개질되지 않은 MMT에 비해 약 11${\AA}$ 증가한 것을 알 수 있었고, FT-IR 결과로부터 D-MMT의 경우 $2800\~2900\;cm^{-1}$ 부근에서 $CH_2$의 피크가 형성된 것을 확인할 수 있었다. 또한 오존처리는 MMT 표면에 Si-O와 $SiO_2$ 관능기를 증가시켰는데, 이는 산소를 포함하는 관능기들이 발달하기 때문으로 판단된다. 오존처리된 MMT가 도입된 나노복합재료에서 열안정성이 증가하는 것을 확인할 수 있었으며, 이는 PP와 MMT 사이의 산-염기 계면 상호작용으로부터 계면 결합력이 향상되었기 때문으로 판단된다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제13권2호
• /
• pp.21-24
• /
• 2011

Superconducting high gradient magnetic separation (HGMS) has advantages to treat wastewater because it can generate high magnetic field and achieve rapid purification. In this study superconducting HGMS was applied to remove impurities from the condenser water in thermal power plant. The condenser water contained mainly hematite and maghemite and it was highly magnetized than hematite. In the HGMS tests using a 6-T cryo-cooled Nb-Ti superconducting magnet, the turbidity of the condenser water was effectively reduced up to 99.6% and the result showed better performance than that of the 0.5-T permanent magnet test. The higher magnetic field was applied in the range of 1-6T, the more iron oxides were removed. The effect of magnetic filter configuration on the condenser water treatment was also investigated. Consequently superconducting HGMS system can be applicable to remove iron oxide impurities from condenser water in thermal power plant.

• 보존과학연구
• /
• 통권31호
• /
• pp.31-42
• /
• 2010

This study were performed thermal shock test for four kind of different rocks (Iksan granite, Namsan granite, Jeongseon marble, Yeongyang sandstone), and according to heating temperature($400^{\circ}C$, $600^{\circ}C$) on samples were investigated physical properties such as specify gravity, porosity, p-wave velocity. As a result, the tendency was appeared that porosity increased, and specific gravity and p-wave velocity decreased at a more higher temperature. But, the situation of change appeared characteristic according to temperature and rock types. In the case of Yeongyang sandstone, it appeared in especially porosity increasing at $400^{\circ}C$. The specific gravity was little change in the all the rock at $400^{\circ}C$ but the decreased at $600^{\circ}C$. Therefore the specific gravity in the temperature range is due to the relatively small impact on the change is expected. Porosity of the granite at $400^{\circ}C$ changes little. but marble in the rate of change is large. Conversely, the sandstone porosity decreased. At $600^{\circ}C$ increased porosity in all of rocks. particularly sandstone the smallest increase in porosity. Experiments showed that p-wave velocity measured through dry rocks was sensitive to quantify the thermal damage. The p-wave velocity of all rocks decreased with increasing temperature. In the relation between porosity and p-wave velocity, p-wave velocity decreased with increasing porosity. On the other hand, in case of Yeongyang sandstone p-wave velocity decreased with decreasing porosity. thus, development of microcracks more affects p-wave velocity than porosity. In this study, damage intensity was well explained with porosity and p-wave velocity values depending on temperature increase.

• 한국토양비료학회지
• /
• 제27권4호
• /
• pp.247-254
• /
• 1994

인광석분말(燐鑛石粉末)의 화학(化學) 및 광물학적(鑛物學的) 특성(特性)을 구명하고 인광석분말(燐鑛石粉末)의 구용성(枸溶性) 인산함량(燐酸含量)을 증대시키기 위한 시험을 수행하여 인광석분말(燐鑛石粉末)의 직접시용(直接施用)을 위한 기초자료(基礎資料)를 얻기 위해 실시한 결과를 요약(要約)하면 다음과 같다. 1. 인광석(燐鑛石)의 주광물(主鑛物)은 인회석(燐灰石)(Apatite, $Ca_5(PO_4)_3$ OH, F, Cl) 중(中) Carbonate apatite이었으며 부광물(副鑛物)로는 방해석(方解石)과 석영(石英) 등(等)이 함유되어 있었고 시차열분석(示差熱分析)(DTA)결과를 보면 $1,000^{\circ}C$까지 뚜렷한 흡열(吸熱)이나 발열(發熱)peak를 볼 수 없었다. 2. 인광석분말(燐鑛石粉末)은 입도(粒度)가 가늘어질수록 구용성(枸溶性) 인산함량은 증가(增加)하나 수용성(水溶性) 인산함량은 입도(粒度)에 관계없이 증가(增加)하지 않았고, 소성(燒成)할 경우 소성시간(燒成時間)이 길어질수록 구용율(枸溶率)은 감소하였으며, 항온온도(恒溫溫度)가 높거나 항온시간(恒溫時間)이 길어질수록 구용율(枸溶率)이 증가하였다. 3. 인광석분말(燐鑛石粉末)을 퇴구비(堆廐肥)와 발효(醱酵)시키거나 산처리(酸處理)를 하면 인산구용율(燐酸枸溶率)이 증가하며 산농도(酸濃度)가 동일할 경우에는 황산(黃酸)이 질산(窒酸) 보다 우수하였다. 30% 황산처리(黃酸處理)는 기간이 진전될수록 구용성(枸溶性) 및 수용성(水溶性) 인산함량(燐酸含量)이 증가하였으나 당밀폐액(糖蜜廢液)처리는 크게 증가하지 않았고, 30% 황산처리(黃酸處理) 후 당밀폐액(糖蜜廢液)으로 제립(製粒)한 시험제품이 당밀폐액(糖蜜廢液)만 처리한 시험제품 보다 구용성(枸溶性) 및 수용성(水溶性) 인산함량(燐酸含量)이 높았다.

• Geomechanics and Engineering
• /
• 제32권2호
• /
• pp.233-244
• /
• 2023

With the increasing amount of resources required by the society development, mining operations go deeper, which raises the requirements of studying the effects of temperature on the physical and mechanical properties of coal and adjacent rock. For now, these effects are yet to be fully revealed. In this paper, a mechanical-electromagnetic radiation (EMR) test system was established to understand the mechanical deterioration characteristics of coal by the effect of thermal treatment and its deformation and fracture characteristics under thermo-mechanical coupling conditions. The mechanical properties of high-temperature-treated coal were analyzed and recorded, based on which, reasons of coal mechanical deterioration as well as the damage parameters were obtained. Changes of the EMR time series under unconstrained conditions were further analyzed before characteristics of EMR signals under different damage conditions were obtained. The evolution process of thermal damage and deformation of coal was then analyzed through the frequency spectrum of EMR. In the end, based on the time-frequency variation characteristics of EMR, a method of determining combustion zones within the underground gasification area and combustion zones' stability level was proposed.

• 자원환경지질
• /
• 제54권3호
• /
• pp.311-330
• /
• 2021

청송 신성리 공룡발자국 화석지에는 최소한 수각류 보행렬 11개, 용각류 보행렬 3개 및 조각류 보행렬 1개 이상 존재하여, 국내 다른 공룡발자국 화석지에 비해 수각류 보행렬의 밀집도가 높다. 공룡발자국의 모암은 미사암과 이암의 암상을 보이나 전체적으로 열변질을 받아 혼펠스화되어 있다. 이 화석지의 표면에는 다양한 방향의 절리가 나타나며 미세균열과 박락을 제외하면 모든 손상요인에서 낮은 점유율을 보였다. 초음파 속도 측정 결과, 화석지의 암석은 비교적 건전한 물성을 보여 안정적인 것으로 평가되었다. 공룡발자국 화석의 손상형태에 따라 보존처리 유형을 세분하면, 균열의 진전을 제어할 수 있는 강화처리가 필요한 발자국화석이 절반 이상의 비율을 보였다. 또한 발자국의 가시화를 위해 도포한 흰색 페인트가 열화되면서 암편 탈락을 유발하여 오히려 화석의 손상을 촉진하는 것으로 나타나, 이를 대체할 방안이 검토되어야 할 것이다.

• Carbon letters
• /
• 제2권3_4호
• /
• pp.159-164
• /
• 2001

In this study, the effects of carbon black (CB) content and anodic oxidation treatment with $AgNO_3$ on positive temperature coefficient (PTC) behavior of CB/HDPE nanocomposites were investigated. Also, the addition of elastomer as a toughing agent was studied. The 20~50 wt% of CB, 0~5 wtt% of elastomer, and 1 wt% of $AgNO_3$-filled HDPE nanocomposites were prepared using the internal mixer in 60 rpm at $160{\circ}C$ and the compression-molded at $180{\circ}C$ for 10 min. As a result, the room temperature resistivity and PTC intensity of the composites were dependent, to a large extent, on the content of CB, addition of elastomer, and surface chemical properties that were controlled in the relative arrangements of the carbon black aggregates in a polymeric matrix. Moreover, the composites with relatively low room temperature resistivity and suitable PTC intensity could be achieved by treatment of $AgNO_3$. Consequently, it was noted that PTC effect was due to the deagglomeration or the breakage of the conductive networks caused by thermal expansion or crystalline melting of the polymeric matrix.

• 한국세라믹학회지
• /
• 제18권1호
• /
• pp.3-12
• /
• 1981

A glass-ceramics based on blast-furnace slag, with some additives to the theoretical composition in order to control properties of mother glass and the heat treatment conditions, has been investigated. The raw materials in this study were blast-furnace slag, serpentine, feldspar and quartz as mother glass ingredients. Titanium dioxide and chromite were used as the nucleating agents. Batch compositions of the prepared glasses and ceraming conditions were found by trial and error method. The optimum conditions were confirmed by analyzing several measured physical properties such as density change during heat treatment, microhardness of slag-ceramics prepared, viscosity change of glass at heat treatment temperatures, nucleation density change, dilatometric properties, differential thermal analysis, identification of the grown crystal and crystal sizes. The batch composition feasible to prepare slag-ceramics was 40% of blast-furnace slag, 25% of serpentine, 18% of feldspar and 17% of silica sand. Three percent titanium dioxide and 1% chromite of the mother glass were added as nucleating agents. The ceraming conditions under which the slag-ceramics having considerably good properties can be developed found as: "The glass was heated at 75$0^{\circ}C$ for 2 hours for nucleation, and the temperature was raised up to 1, 00$0^{\circ}C$ with a rate of 0.75$^{\circ}C$/min for crystal growth.owth.