• The Journal of the Petrological Society of Korea
• /
• v.23 no.4
• /
• pp.385-391
• /
• 2014

Quaternary basaltic rocks occur as volcanic plateau and/or river cliff in the watershed area of Hantan River in Jeongok, central Korea. We measured $^{40}Ar-^{39}Ar$ ages for the basaltic rocks from Jeongok area using the multi-collector noble gas mass spectrometer and laser heating device introduced for the first time in Korea. The basaltic rocks from the river cliff in Eundae-ri area show the systematic change in $^{40}Ar-^{39}Ar$ ages from $0.54{\pm}0.07Ma$ through $0.48{\pm}0.01Ma$ to $0.12{\pm}0.01Ma$ toward the top. The other sample from Jeongok-ri area yields the age of $0.43{\pm}0.04Ma$. This results suggest that there might be a episodic volcanic eruption between 0.12-0.54 Ma in Jeongok area.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.118-123
• /
• 2008

In the present study, the effect of oxyfluorination treatment on multi-walled nanotubes (MWNTs) supports was investigated by analyzing surface functional groups. The surface characteristics were determined by Fourier transformed-infrared (FT-IR) and X-ray photoelectron spectroscopy (XPS). After the deposition of platinum nanoparticles on the above treated carbon supports, a crystalline size and a loading level had been investigated. Electrochemical properties of the treated MWNTs-supported Pt (Pt/MWNTs) catalysts were analyzed by current-voltage curve measurements. From the results of surface analysis, an oxygen and fluorine-containing functional group had been introduced to the surface of carbon supports. The oxygen and fluorine contents were the highest value at the treatment of 100 temperature. The Pt/100-MWNTs showed the smallest particle crystalline size of 3.5 nm and the highest loading level of 9.4% at the treatment of 100 temperature. However, the sample treated at the higher temperature showed the larger crystalline size and the lower loading level. This indicated that the crystalline size and the loading level could be controlled by changing the temperature of oxyfluorination treatment. Accordingly, an electrochemical activity was enhanced by increasing the temperature of treatment upto 100, and then decreased in the case of 200 and 300. The highest specific current density of 120 mA/mg had been obtained in the case of Pt/100-MWNTs.

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.322-331
• /
• 2007

In this study, electrical resistivity tomography (ERT) were conducted to find the mineralized zone at the Geumpung mine in Dojeon-ri, Susan-myeon, Jecheon-si, Chungcheongbuk-do. The deviation of the inclined borehole was measured to obtain the exact positions of the electrodes for correcting apparent resistivity values from ERT. Geophysical loggings such as resistivity and natural gamma were conducted to obtain the properties of the material near the borehole. Measurements of the physical properties of the cores, such as porosity, water content, density, susceptibility, resistivity were performed to analyze the correlation between physical properties and resistivity. Grade analysis for core sample was also conducted to identify relationship between grade and resistivity. Rock property analysis shows that the resistivity is more dominated by susceptibility and grade than by porosity and water content in the mineralized zone. The results of ERT are well consistent with geophysical logging data and geologic column. So ERT is powerful method to identify conductive mineralized zone.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.5
• /
• pp.389-399
• /
• 2016

This paper presents the explorations of hydrothermal vents located in the Marina Arc and Back Arc Basin using the deep-sea ROV Hemire. These explorations were conducted by KRISO and KIOST to demonstrate the capability of Hemire in various applications for deep-sea scientific research. The missions included the following: (1) to search the reported vents, (2) conduct visual inspections, (3) deploy/recover a sediment trap and bait traps, (4) sample sediment/water/rock, (5) measure the magnetic field at the vent site, and (6) acquire a detailed map using multi-beam sonar near the bottom. We installed three HD cameras for precise visual inspection, a high-temperature thermometer, a three-component magnetometer, and a multi-beam sonar to acquire details of the bottom contour or identify vents in the survey area. The explorations were performed in an expedition from March 23 to April 5, 2016, and the missions were successfully completed. This paper discusses the operational process, navigation, and control of Hemire, as well as the exploration results.

• Journal of the Economic Geographical Society of Korea
• /
• v.22 no.3
• /
• pp.337-350
• /
• 2019

The Gwangyang City of Jeonnam Province, is one of the steel cities representing the Korea. Gwangyang Steelworks are the core of the local economy, and 59 firms of POSCO Outsourcing Partner Cooperation(POSPA) have been employed 9,300 to 9,500 peoples, and have been acted as an central incubator for job creation. POSPA, however, are suffering from the retirement of company in young age group, in their 20s and 30s. The purpose of this study is to analyze potential job seekers' perceptions and job preferences for POSPA are suffering from job openings. In order to this research purpose, it used questionary survey, and sample groups were divided into three areas, the Eastern Jeonnam Province, Gwangju, and the Seoul metropolitan area. Potential job seekers' perceptions for POSPA was low, and perceptions on firm and job opportunity information was lower. This characteristics were the same as those of respondents living in eastern South Jeolla Province. Potential job seekers, however, showed high preference for finding job at POSPA. A place-based policy considering the local labor market is needed to resolve the mismatch between the difficulty of finding a labor and the difficulty of finding a job.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.4
• /
• pp.277-291
• /
• 2021

A mineral phase contained in a rock sample can be categorized into several crystal populations with distinct origins and crystal growth histories. A detailed textural and mineralogical investigation on a clinopyroxene megacryst-bearing porphyritic dike with glassy chilled margins (tachylyte) in the southeastern Ulleung Island was conducted to decipher its crystal populations. During this study, we have measured glass and mineral major element compositions using electron microprobe analyzer. Tachylyte has a homogeneous trachyandesitic composition without any significant alteration characteristics, suggesting that its composition may represent the original melt composition of the dike. Clinopyroxene and plagioclase larger than 0.5 mm are antecrysts equilibrated with a more primitive melt composition than trachyandesitic tachylyte. Meanwhile, clinopyroxene and plagioclase microlites (<0.5mm) are regarded as primocrysts crystallized in-situ. According to our results, all clinopyroxenes in the Stage I Dodong Basalt are sectored into basal and prismatic parts, whose compositional ranges systematically vary: [Mg+Si+Fe]_basal ↔ [Al+Ti+Na]_prism. Therefore, we suggest that the effect of the elemental partitioning caused by the clinopyroxene sector zonation in Stage I volcanism should be considered in the future works.

• Economic and Environmental Geology
• /
• v.55 no.5
• /
• pp.447-463
• /
• 2022

The lime and clay that used in the construction of the Tomb of King Muryeong and the Royal Tombs in Gongju are auxiliary materials, and are used joint and plaster materials for the wall to play a role of structural support. In this study, the homogeneity between the tombs and material characteristics were interpreted through quantitative analysis of lime and clay. As a result of microtexture and composition analysis, almost the same minerals were identified in each sample groups, and similar characteristics were shown in thermal analysis. Geochemically, it is confirmed that the behavior characteristics are very similar regardless of the tombs. The compositions is also confirmed high homogeneity in the diagrams of CaO-MgO-SiO₂, RO₂-(RO+R₂O) correlations, A-CN-K and A-CNK-FM triangles. Therefore, it is interpreted that the clay used for the construction of the tomb complex was supplied from around area, and the raw materials of lime were produced using shell fragments of oyster family based on mainly composed of calcite. It is interpreted that the raw materials of lime were supplied from middens along the west coast of down the Geumgang river in Korean peninsula, but the consideration of the supply site, needs to be cross-validated through stable isotope analysis, use of carbonate rock and reproduction experiments.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5C
• /
• pp.209-218
• /
• 2010

In residual soils, large particles such as rock fragments or gravel are surrounded by sand or clay. The strength of such granular mixtures can be controlled by the concentration of fine or coarse grains. The percentage by weight, size or shape of gravel in the mixture that can control the strength of the mixture has not been clearly determined for various granular mixtures. In this study, the effect of dispersed gravels on the shear characteristics of sand was evaluated. Large and small gravels were inserted in the middle of each layer with moist Nakdong River sand and compacted into a cylindrical sample with five equal layers. Embedded gravel ratios by weight were 0, 3, 9, and 14%. After consolidation, a series of undrained triaxial compression tests was performed on Nakdong River sand with dispersed gravels. Maximum deviator stresses of the Nakdong River sand with large gravels decrease up to 38% as a percentage of embedded gravels increases. Such strength degradation decreases as a confining pressure increases. The maximum deviator stress increases as the percentage by weight of small gravel increases; at 3 or 9% of gravel weight it slightly increases but at 14% of gravel weight it increases up to 34%.

• Journal of Korean Society of Forest Science
• /
• v.113 no.3
• /
• pp.382-392
• /
• 2024

This study aimed to identify differences in soil properties and geological characteristics between slow-moving landslide prone areas and areas without landslide (control areas) in the Republic of Korea. During this 3-year field surveys (2019-2021), 11 soil and geological parameters were measured at 300 sites, i.e., 107 slow-moving landslide prone areas and 193 control areas. T-tests were conducted to identify differences in field-observed parameters between the two areas, followed by χ²-tests and density plots considering distribution patterns of the sample groups. We identified statistically significant differences between the areas in terms of soil internal friction angle, weathered rock thickness, bedrock thickness, and number of major geological anomaly zones. In conclusion, slow-moving landslide prone areas exhibited significant differences in geological characteristics, such as stratum thickness and presence of anomaly zones, compared with the control areas. To better understand the relationship between the geological characteristics identified in this study and the occurrence of slow-moving landslides, further field data collection and systematic analyses are warranted.

• Economic and Environmental Geology
• /
• v.49 no.5
• /
• pp.371-380
• /
• 2016

This study aims to identify the mineraloical and petrographical characteristics of caprock from drilling cores of Pohang basin as a potential $CO_2$ storage site. Experiments and modeling were conducted in order to investigate the geochemical and mineralogical caprock effects of carbon dioxide. A series of autoclave experiments were conducted to simulate the interaction in the $scCO_2$-caprock-brine using a high pressure and temperature cell at $50^{\circ}C$ and 100 bar. Geochemical and mineralogical alterations after 15 days of $scCO_2$-caprock-brine sample reactions were quantitatively examined by XRD, XRF, ICP-OES investigation. Results of mineralogical studies, together with petrographic data of caprock and data on the physicochemical parameters of brine were used for geochemical modeling. Modelling was carried out using the The Geochemist's Workbench 11.0.4 geochemical simulator. Results from XRD analysis for caprock sample showed that major compositional minerals are quartz, plagioclase, and K-feldspar, and muscovite, pyrite, siderite, calcite, kaolinite and montnorillonite were included on a small scale. Results from ICP-OES analysis for brine showed that concentration of $Ca^{2+}$, $Na^+$, $K^+$ and $Mg^{2+}$ increased due to dissolution of plagioclase, K-feldspar and muscovite. Results of modeling for the period of 100 years showed that the recrystallization of kaolinite, dawsonite and beidellite, at the expense of plagioclase and K-feldspar is characteristic. Volumes of newly precipitation minerals and minerals passing into brine were balanced, so the porosity remained nearly unchanged. Experimental and modeling results indicate the interaction between caprock and $scCO_2$ during geologic carbon sequestration can exert significant impacts in brine pH and solubility/stability of minerals.