• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.8
• /
• pp.2088-2100
• /
• 1994

Considerable attention has been given to controller designs that utilize the variable structure system theory in order to achieve robust tracking performance of robotic manipulators subjected to parameter variations and extraneous disturbances. However, the theory has not had wide spread acceptance in practical control engineering community due mainly to the worry of chattering which is inherently ever-existing in the variable structure system. This paper presents a novel type of fuzzy-sliding mode controller to alleviate the chattering problem. A sliding mode controller for robust robot control is firstly synthesized with an assumption that the imposed system uncertainties satisfy matching conditions so that certain deterministic performances can parameters and control rules are obtained from a relation between predetermined sliding surfaces and representative points in the error state space. A two degree-of-freedom robotic manipulator subjected to a variable payload and a torque disturbance is considered in order to demonstrate superior tracking performance accrued from the proposed methodology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.3
• /
• pp.325-331
• /
• 2006

This paper suggests the design methodology of a robust controller based on disturbance rejection controller using DSP. In this paper, we discuss process to put the disturbance rejection controller into practice, and examine the performance of disturbance rejection controller by implementing it on DSP based hardware to evaluate usefulness of controller. As a result, the proposed robust controller can not only stabilize system against disturbance ,but it improve controlling performance. And also, it shows convenient to put into practical use of industrial sites due to its easy implementation on the hardware.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1103-1108
• /
• 2007

This paper describes a robust model-based roll state estimator for application to the detection of impending vehicle rollover. The roll state estimator is based on a 2-D bicycle model and a roll model to estimate the maneuver-induced vehicle roll motion. The measurement signals are lateral acceleration, yaw rate, steering angle, and vehicle speed. Vehicle mass is adapted to obtain robust performance of the estimator. Computer simulation is conducted to evaluate the proposed roll state estimator by using a validated vehicle simulator. It is shown that the roll state estimator shows robust performance without exact vehicle mass information.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.12
• /
• pp.1137-1142
• /
• 2010

This paper studied the speech parameters less affected by the human emotion for the development of the robust speech recognition system. For this purpose, the effect of emotion on the speech recognition system and robust speech parameters of speech recognition system were studied using speech database containing various emotions. In this study, mel-cepstral coefficient, delta-cepstral coefficient, RASTA mel-cepstral coefficient and frequency warped mel-cepstral coefficient were used as feature parameters. And CMS (Cepstral Mean Subtraction) method were used as a signal bias removal technique. Experimental results showed that the HMM based speaker independent word recognizer using vocal tract length normalized mel-cepstral coefficient, its derivatives and CMS as a signal bias removal showed the best performance of 0.78% word error rate. This corresponds to about a 50% word error reduction as compare to the performance of baseline system using mel-cepstral coefficient, its derivatives and CMS.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.39-44
• /
• 2003

It was shown that the robustness of deterministic observers with respect to modeling errors, measurement bias and round-off errors can be represented by a single performance index the condition number of the observer eigenvector matrix. In this paper, a robust observer for multi-output systems is designed using the left eigenstructure assignment, where the observer gain can not be determined uniquely with respect to the desired observer poles. Utilizing the eigenstructuer assignment for the robustness of the observer, the desired eigenvector matrix is selected to achieve the observer eigenvector matrix with the small condition number. The performance of the designed robust observer is evaluated in a spindle-drive simulation example where the load speed to be estimated based on the measured signals.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.4
• /
• pp.520-526
• /
• 2003

In the case of a strapdown inertial navigation system (SDINS) with sizeable attitude errors, the uncertainty caused by linearization of the system degrades the performance of the filter. In this paper, a robust filter and various error models for the uncertainty are presented. The analytical characteristics of the proposed filter are also investigated. The results show that the filter does not require the statistical property of the system disturbance and that the region of the estimation error depends on a freedom parameter in the worst case. Then, the uncertainty of the SDINS is derived. Depending on the choice of the reference frame and the attitude error state, several error models are presented. Finally, various in-flight alignment methods are proposed by combining the robust filter with the error models. Simulation results demonstrate that the proposed filter effectively improves the performance.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.7
• /
• pp.974-988
• /
• 1995

In this paper, we propose a range image segmentation algorithm using robust regression. We derive a least $\kappa$th-order square (LKS) method by generalizing the least median of squares (LMedS) method and compare it with the conventional robust regressions. The LKS is robuster against outliers than the LMedS and shows performance similar to the residual consensus (RESC). The RESC uses the predetermined number of sorted residuals, whereas the LKS uses an adaptive parameter determined by given observations rather than the a priori knowledge. Computer simulation with synthetic and real range images shows that the proposed LKS algorithm gives better performance than the conventional ones.

• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.640-644
• /
• 2010

When we talk with hands-free in a car or noisy lobby, the performance of the echo canceller degrade because background noise added to echo caused by the distance from mouth to microphone is relatively long. It gives a reason for necessity of noise-robust and high convergence speed adaptive algorithm. And if acoustic echo canceller operated not perfectly, residual signal going through the echo canceller to far-end speaker remains residual echo, which degrade quality of talk. To solve this problem, post-processing needed to remove residual echo ones more. In this paper, we propose a new acoustic echo canceller, which has noise robust and high convergence speed, linked with linear predictor as a post-processor. By computer simulation, it is confirmed that the proposed algorithm shows better performance from acoustic interference cancellation (AIC) viewpoint.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.498-501
• /
• 1998

This paper deals with the design and evaluation of the robust controller for a synchronous generator excitation system to improve the steady state and transient stability. The nonlinear characteristics of the system is treated as model uncertainties, and then the robust control techniques are introduced into the power system stability design to take into account these uncertainties at the controller design stage. The performance of the designed controller is examined by extensive non-linear time domain simulation. It is shown that the performance of the robust controller is superior to that of the conventional PI controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.421-421
• /
• 2000

In this paper, robust two-degree-of-freedom controller for satellite antenna system which tracks reference signal is designed. Two-degree-of-freedom controller consists of a prefilter and a feedback controller to solve trade-off between robust stability and command response. The feedback controller is designed from specifications like stability, disturbance rejection and robustness via H$_{\infty}$ design technique. In the sequel, H$_2$ optimal prefilter is introduced to improve the command response. This suggests a two-step design, with different types of performance specifications at each stage. In practical problems, this may easily lead to a prefilter of unacceptably high order. In order to avoid high order prefilter we use a particular structure in which both the prefilter and the feedback controller share the same dynamics. H$_2$-prefilter technique proposed in this paper is verified by simulation.