• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1195-1199
• /
• 1998

In this paper a design method of robust power system stabilizers is proposed by means of robust linear quadratic regulator design technique under power system's operating condition change, which is caused by inner structure uncertainties and disturbances into a power system. It is assumed that the uncertainties present in the system are modeled as one equivalent signal. In this connections an optimal LQR control input for disturbance rejection, the output feedback gain for eliminating the disturbance are calculated. In this case. PSS input signal is obtained on the basis of weighted ${\Delta}P_e$ and $\Delta\omega$. In order to stabilize the overall control of system. Pole placement algorithm is applied in addition. making the poles of the closed loop system to move into a stable region in the complex plane. Some simulations have been conducted to verify the feasibility of the proposed control method on a machine to infinite bus power system. From the simulation results validation of the proposed method could be achieved by comparisons with the conventional PSS with phase lag-lead compensation.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.927-930
• /
• 2000

Visual features of lip area play an important role in the visual speech information. We are concerned about correct lip area as region of interest (ROI). In this paper, we propose a robust and fast method for locating the mouth corners. Also, we define a region of interest at mouth during speech. A method, which we have used, only uses the horizontal and vertical image operators at mouth area. This searching is performed by fitting the ROI-template to image with illumination control. Most of the lip extraction algorithms are dependent on luminosity of image. We just used the binary image where the variable threshold is applied. The variable threshold varies to illumination condition. In order to control those variations, the gray-tone is converted to binary image by threshold, which is obtained through Multiple Linear Regression Analysis (MLRA) about divided 2D special region. Thus we obtained the region of interest at mouth area, which is the robust extraction about illumination. A region of interest is automatically extracted.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.433-435
• /
• 1993

The purpose of this study is to propose a robust OFVSCS that have the robust properties against process parameter variations and external disturbances by extending the basic OFVSCS and to evaluate its control performances. The ROFVSCS is composed of dynamic switching surfaces and output feedback switching control inputs that are constructed by the use of the unknown vector modeling technique. With the proposed scheme. existence of sliding mode is guaranteed and any nonzero bias can be suppressed in the face of disturbances and process parameter variations as far as well-known matching condition is satisfied. Due to the fact that the ROFVSCS is driven by small number of measured information, the practical application of VSCS for the systems with unmeasurable states and for high order systems. that conventional schemes cannot be applied, is possible with the proposed scheme. It is noticeable that implementation cost or VSCS can be considerably reduced without sacrifice of control performances by adopting ROFVSCS since there is no need to measure the states with high measurement cost.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.5
• /
• pp.894-902
• /
• 2010

This paper presents a vision-based robust off-road terrain classification method against environmental variation. As a supervised classification algorithm, we applied a neural network classifier using wavelet features extracted from wavelet transform of an image. In order to get over an effect of overall image feature variation, we adopted environment sensors and gathered the training parameters database according to environmental conditions. The robust terrain classification algorithm against environmental variation was implemented by choosing an optimal parameter using environmental information. The proposed algorithm was embedded on a processor board under the VxWorks real-time operating system. The processor board is containing four 1GHz 7448 PowerPC CPUs. In order to implement an optimal software architecture on which a distributed parallel processing is possible, we measured and analyzed the data delivery time between the CPUs. And the performance of the present algorithm was verified, comparing classification results using the real off-road images acquired under various environmental conditions in conformity with applied classifiers and features. Experiments show the robustness of the classification results on any environmental condition.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.4
• /
• pp.10-15
• /
• 2019

In this paper, we report a robust steering control using time delay control for the vehicle dynamics variation due to tire/road contact condition variation, the lateral disturbance force due to the side wind, and the yaw disturbance moment due to the difference between the left and right tires' pneumatic pressure. We controlled the side slip and yaw damping compensation for rapid steering at the high velocity of the vehicle. Based on the developed control, the driver can only consider the desired path without concerning on the vehicle dynamics variation, disturbances, and undesired side slip and yaw oscillations. Simulation results show that robustness from the vehicle dynamics variation and disturbances was achieved by using the developed time delay control. We evaluated the side slip and yaw damping compensation capability for the rapid steering at the high velocity of the vehicle in the cases of three control methods.

• ETRI Journal
• /
• v.29 no.3
• /
• pp.300-304
• /
• 2007

This paper proposes a new data-driven method for high-pass approaches, which suppresses slow-varying noise components. Conventional high-pass approaches are based on the idea of decorrelating the feature vector sequence, and are trying for adaptability to various conditions. The proposed method is based on temporal local decorrelation using the information-maximization theory for each utterance. This is performed on an utterance-by-utterance basis, which provides an adaptive channel normalization filter for each condition. The performance of the proposed method is evaluated by isolated-word recognition experiments with channel distortion. Experimental results show that the proposed method yields outstanding improvement for channel-distorted speech recognition.

• International Journal of Control, Automation, and Systems
• /
• v.2 no.1
• /
• pp.76-82
• /
• 2004

A robust fuzzy controller is designed to stabilize a class of solvable nonlinear descriptor systems with time-varying delay. First, a new modeling and control method for nonlinear descriptor systems is presented with a fuzzy descriptor model. A sufficient condition for the existence of the fuzzy controller is given in terms of a series of LMIs. Then, a less conservative fuzzy controller design approach is obtained based on the fuzzy rules and weights. This method includes the interactions of the different subsystems into one matrix. The effectiveness of the presented approach and the design procedure of the fuzzy controller are illustrated by way of an example.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.3
• /
• pp.411-418
• /
• 2005

This paper discusses an output-tracking control design method for Takagi-Sugeno fuzzy systems with parametric uncertainties. We first represent the concerned system as a set of uncertain linear systems. The tracking problem is then converted into a stabilization problem thereby leading to a more feasible control design procedure. A sufficient condition for robust practical output tracking is derived in terms of a set of linear matrix inequalities. A numerical example for a flexible-joint robot-arm model has been demonstrated, to convincingly show effectiveness of the proposed system modeling and control design.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.782-785
• /
• 2002

The goal of this research is to deduce the robust design of mold oscillator of the continuous casting machine. In the case of the system operated in the high temperature condition, the structural problems caused by the heat are dominant. Therefore, the thermal stress is considered with the connection of the thermal and structural analyses. The cooling ability of the water jacket was estimated and the robustness of mold oscillator was judged with the displacement and stress distributions obtained by the finite element method. The analytic results were compared with the real values of the iron mill.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.3
• /
• pp.153-161
• /
• 1996

This paper presents a design method of dynamic positioning control system for floating platform with rotatable and retractable thruster using $H_{\infty}$ control technique. The norm band of uncertainty is captured by multiplicative perturbation between nominal model and reduced order model. A controller robust to the uncertainty is designed applying $H_{\infty}$ synthesis. The control law satisfying robust stabillity and nominal performance condition is determined through the mixed sensitivity approach. The evaluation for the resultant controller obtained by $H_{\infty}$ synthesis is done through simulations of the closed loop system. The results of $H_{\infty}$ synthesis are compared to those of the traditional LQ synthesis method.