• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.5
• /
• pp.76-82
• /
• 1999

During operating given working a robot manipulator makes some problems such as the accumulation of the error or the deviation from the command trajectory. These problems are mainly due to the disturbance noise or unmodeled system parameters. To solve these problems most of robot manipulators equip the controller. But if exact controller gains are not seleced we can't decrease the working efficiency(such as compensation about error or deviation) of the robot manipulator. So in this paper we present the controller gain tuning law by which we can find the controller gain which satisfies the per-formance specification of the robot manipulator during working of the robot. The proposed algorithm is derived from the Laypunov direct method. And by the simulation on the 4-axis SCARA type robot(SAMSUNG SM5 Robot) we guarantee the performance of this algorithm.

• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.4
• /
• pp.312-317
• /
• 1996

This paper proposes a neural network controller with the computed torque method. The neural network is used not to learn the inverse dynamic model but to compensate the uncertainties of robotic manipulators. When training the neural network, we use the signals present in the proposed controller, which is simpler than that proposed by Ishiguro et al., whose teaching signals of the neural network come from the robot model.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.8
• /
• pp.916-926
• /
• 1988

In this paper, we explore real-time implementation of various dynamic control algorithms, which use the different levels of the information of the dynamics, using a SCARA type robot to show the feasibility and effectiveness of such algorithms. For these purposes, the kinematics of the SCARA type robot is anayzed and the manipulator-actuator dynamic equations based on Lagrange mechanisms are derived. Experimental results indicate that computed torque technique and iterative learning control methods perform better than classical PID control and that these algorithms can be effectively applied to controlling industrial manipulators.

• Journal of the Korean Institute of Navigation
• /
• v.21 no.1
• /
• pp.109-118
• /
• 1997

In this paper, applications of multilayer neural networks to control of flexible robot beam are considered. The multilayer nerual networks can be used to approximate any continuous function to a desired degree of accuracy and the weights are updated by Gradient Method. When a flexible beam is rotated by a motor through the fixed end, transverse vibration may occur. The motor torque should be controlled insuch a way that the motor rotates by a specified angle, while simultaneously stabilizing vibration of the flexible manipulators so that is arrested as soon as possbile at the end of rotation. Accurate control of lightweight beam during the large changes in configuration common to robotic tasks requires dynamic models that describe both rigid body motions, as well as the flexural vibrations. Therefore, a linear dynamic state-space model of for a single link flexible robot beam is derived and PD controller, LQP controller, and inverse dynamical neural networks controller are composed. The effectiveness the proposed control system is confirmed by computer simulation.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.1207-1210
• /
• 1993

There is an opinion of regarding a simple fuzzy logic controller as a kind of Variable Structure Controller in recent years. The opinion may provide an analytical basis which describes the robustness to uncertainty and the stability of a fuzzy logic controller. So in this paper, a fuzzy logic controller based on the Variable Structure System with is designed for a robot manipulator which is a class of complex, nonlinear system with uncertainty. Fuzzy control rules, membership shape of the I/O variables of the fuzzy logic controller are designed for guaranteeing the stability of an overall control system. From a computer simulation of dynamic control of a two link robot manipulator, the design procedure of the fuzzy logic controller is validated.

• The Journal of Korea Robotics Society
• /
• v.19 no.2
• /
• pp.169-175
• /
• 2024

In this study, we developed control system for stable teleoperation of supermicrosurgical robot platform. The supermicrosurgical robot platform is designed to perform precise anastomosis with micro vessels ranging from 0.3 mm to 0.7 mm. The robotic assistance could help more precise manipulation then manual surgery with the help of motion scaling and tremor filtering. However, since the robotic system could cause several vulnerabilities, control system for stable teleoperation should be preceded. Therefore, we first designed control system including inverse kinematics solver, clutch error interpolator and finite state machine. The inverse kinematics solver was designed to minimized inertial motion of the manipulator and tested by applying orientational motion. To make robot slowly converges to the leader's orientation when orientational error was occurred during clutch, the SLERP was used to interpolate the error. Since synchronized behavior of two manipulators and independent behavior of manipulator both exist, two layered finite state machines were designed. Finally, the control system was evaluated by experiment and showed intended behavior, while maintaining low pose error.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.04a
• /
• pp.131-136
• /
• 1997

This paper represent the variable structure adaptive mode control technique which is new approach to implement the robust control of industrial robot manipulator with external disturbances and parameter uncertainties. Sliding mode control is a well-known technique for robust control of uncertain nonlinear systems. The robustness of sliding model controllers can be shown in contiuous time, but digital implementation may not preserve robustness properties because the sampling process limits the existence of a true sliding mode. the sampling process often forces the trajectory to oscillate in the neighborhood of the sliding surface. Adaptive control technique is particularly well-suited to robot manipulators where dynamic model is highly complex and may contain unknown parameters. Adaptive control algorithm is designed by using the principle of the model reference adaptive control method based upon the hyperstability theory. The proposed control scheme has a simple sturcture is computationally fast and does not require knowledge of the complex dynamic model or the parameter values of the manipulator or the payload. Simulation results show that the proposed method not only improves the performance of the system but also reduces the chattering problem of sliding mode control, Consequently, it is expected that the new adaptive sliding mode control algorithm will be suited for various practical applications of industrial robot control system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.455-458
• /
• 2003

An optimal control approach to robust control design is proposed in this study for rigid robotic systems under the unknown load and the other uncertainties. The uncertainties are quadratically bounded for some positive definite matrix. Iterative method to find the matrix is shown. Simulations arc made for a weight-lifting operation of a two-link manipulator and the robust control performance of robotic systems by the proposed algorithm is remarkable.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.12
• /
• pp.176-182
• /
• 2003

An optimal control approach to robust control design is proposed in this study for rigid robotic systems under the unknown load and the other uncertainties. The uncertainties are quadratically bounded for some positive definite matrix. Iterative method to find the matrix is shown. Simulations are made for a weight-lifting operation of a two-link manipulator and the robust control performance of robotic systems by the proposed algorithm is remarkable.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2211-2216
• /
• 2005

This paper describes a novel navigation algorithm using a locomotion interface with two 6-DOF parallel robotic manipulators. The suggested novel navigation system can induce user's real walking and generate realistic visual feedback during navigation, using robotic manipulators. For realistic visual feedback, the virtual environment is designed with three components; 3D object modeler for buildings and terrains, scene manager and communication manager component. The walking velocity of the user is directly translated to VR actions for navigation. Finally, the functions of the RPC interface are utilized for each interaction mode. The suggested navigation system can allow a user to explore into various virtual terrains with real walking and realistic visual feedback.