• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.85-95
• /
• 2017

This study aims to identify the throw distance in terms of truck weight, bumper height, and speed in a truck and pedestrian collision, and to propose a model for throw distance estimates. For this purpose, a simulation analysis is performed using the PC-crash program with the following experiment conditions: Truck weight of 5t, 15t, and 25t, Bumper height from 0.3m to 0.6m by 0.1m, and speed from 10km/h to 100km/h by 10 km/h. Experimental results show that the truck speed and bumper height are found to be significant factors for pedestrian throw distance, but truck weight is not a significant factor. Also, a regression model is developed for pedestrian throw distance estimate from the multiple regression analysis. The adjusted $R^2$ value of the model is 93.3%, which is very good explanatory power.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.4
• /
• pp.115-128
• /
• 2016

Many research activities to reduce accidents on the road and to improve traffic efficiency have been performed and almost research projects are developing technologies and services based on C-ITS technology nowadays. The main concept of C-ITS is improving road safety and traffic efficiency by sharing and reproducing information between various elements. To accomplish this goal, V2X communication technology has been adopted. In Korea, we have studied V2X communication technology in support of SMART-Highway research project and are managing test-bed to verify the developed technology recently. In this paper, we introduce SMART-Highway test-bed and show the procedure and result of V2X communication performance analysis on the test-bed.

• International Journal of Highway Engineering
• /
• v.17 no.1
• /
• pp.91-98
• /
• 2015

PURPOSES : Although signalized intersections have been considered the best way to control traffic volume in urban areas for several decades, roundabouts are currently being discussed as an alternative way to control traffic volume, especially when traffic is light. Because a roundabout's efficiency depends on the load geometry as well as the traffic volume, design guidelines for roundabouts are recommended only if the incoming traffic volume is very low. It is rare to substitute a roundabout for an existing signalized intersection in urban areas. This study aims to estimate the benefits from the transformation of an existing signalized intersection into a roundabout in an urban area. When there is a more moderate volume of traffic, roundabouts can be effectively used by optimizing signals located at an approaching roadway. METHODS : The methodologies of this paper are as follows: First, a signalized intersection was analyzed to determine the traffic characteristics. Second, the signalized intersection was transformed into a roundabout using VISSIM microscopic traffic simulation. Then, we estimated and analyzed the effects and the performance of the roundabout. In addition, we adjusted a method to improve the benefits of the transformation via the optimization of signals located at an approaching road to control the incoming traffic volume. RESULTS : The results of this research are as follows: The signal-optimized roundabout improved delays compared with the signalized intersection during the morning peak hour, non-peak hour, and evening peak hour by 1.78%, 12.45%, and 12.72%, respectively. CONCLUSIONS : According to the simulation results of each scenarios, the signal-optimized roundabout had less delay time than the signalized intersection. If optimized signal control algorithms are installed in roundabouts in the future, this will lead to more efficient traffic management.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.6
• /
• pp.63-82
• /
• 2010

In spite of continuous road construction, traffic congestion has been worsening by radical vehicle's increase and development of surroundings near expressway. Thus, the necessity of traffic management and the needs of provision of traffic information to drivers are raised. In order to solve traffic problems, such as traffic congestion, search for optimal congestion management technique and evaluation of the effect of optimal solution should be examined prior to practice of optimal alternative. However, existing traffic analysis model and simulation programs as tools to search and evaluate optimal alternative are not sufficient to reflect traffic flow characteristics, domestic road and traffic conditions and to link up to Freeway Traffic Management Systems (FTMS). Hence, to use existing traffic analysis and simulation tools are followed by hard work to need a lot of time and cost. Therefore, in this research, Expressway TRaffic Analysis Model (ExTRAM) based on Freeway Traffic Management Systems (FTMS) was developed to apply it into congestion management easily.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.11a
• /
• pp.533-538
• /
• 2005

Due to rapidly inc Due to rapidly Increase the number of vehicles, the number of vehicle passed over the traffic capacity which is allowable on each road. In order to disperse the traffic in the congestion area, ITS related techniques have been studied advancing. However, the cost of setting up and managing In is considerable to recently improve the problem or In, various traffic analysis technique are problem using low cost RFID. In this paper, the method of RFID-Reader location selection, which is a core technique to analyze traffic amount and traffic context is proposal. In order to systematically utilize traffic related road information, GIS is used for the proposal method. In addition, a rule-based model using O/D data that is the important information for selection the location of traffic observation.

• Journal of Korean Society of Transportation
• /
• v.25 no.4
• /
• pp.7-19
• /
• 2007

The purpose of posted speeds is to provide a speed that ensures the safety of vehicle flow according to given road situations. Because of this, posted speeds must be carefully examined, and posted speeds at freeway exits and entrances in particular should consider car characteristics. Posted speeds at freeway exits and entrances must take changing speeds due to curve radiuses into consideration and in this study, an 85th percentile speed becomes the most important element to consider. When it is considered that most traffic accidents occur because of variations in speed between cars, posted speeds should be set after considering car traveling characteristics. Within these dimensions, instead of putting significance on an upper direction regulation or lower direction regulation, speed distributions which fit to the characteristics of each road should be fully considered. Accordingly, this study evaluated appropriate posted speeds that will reduce the dangers of traffic accidents through posted speed regulations of roads now in operation by offering a posted speed setting method theory, using entries at Yangji, Yongin, and Cheongwon interchanges as subjects.

• International Journal of Highway Engineering
• /
• v.14 no.1
• /
• pp.25-34
• /
• 2012

The rapid economic development induced the massive road constructions, becoming bigger and high-speed of the vehicles. However, it brings lots of social problems, such as air pollutions, traffic noise and vibration. Special concrete block for the base course of asphalt pavement is needed to decrease traffic noise such as tire's explosive and vehicles sound, applying Helmholtz Resonators theory to asphalt pavement. If it is applied to the area where it happens considerable noise such as a junction, the street of a housing complex and a residential street, it is one of alternative methods to solve the social requirements of noise problems. This research examines couple of laboratory tests for the sound absorption effect of the concrete block and the base concrete block for quiet pavement. The specimens, which is fixed hall-size, space, depth as the condition of this research, are analysed of noise reduction effect using different noise levels of vehicles. Judging from the analysis of test results with vehicle noise volume, measurement distance, a form and size of the hall using the base concrete block, the use of special concrete base and quiet asphalt surface showed a good alternative solution for decreasing traffic noise level, from 4dB to 9dB.

• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.167-175
• /
• 2013

PURPOSES : The objective of this study is to investigate the capability of the combined model of traffic simulation, emission and air dispersion models on the impact analysis of air quality of mobile sources such as vehicles. METHODS : The improvement of the quality of life brings about the increasing interest of the public environment. Many endeavors including the travel demand management, the application of the state-of-the-art ITS technologies, the promotion of eco-friendly vehicles have been tried in transportation area to reduce the modal emissions. Especially, it is expected that the increasing number of eco-friendly vehicles in the road network would be able to reduce the pipe-tail emissions tremendously. From this perspective, we have performed a study on the impact analysis of the popularization of the eco-friendly vehicle in the place of the fossil fuel energy powered vehicles on the surrounding air quality using the combined framework of microscopic traffic simulation, emission and air dispersion model. RESULTS : The combined model successfully captured the effect of moving to the eco-friendly vehicles on the air quality, and the results showed that the increasing usage of eco-friendly vehicles can improve the surrounding air quality tremendously and that the air dispersion model plays a crucial role in the investigation of the air quality change around the main corridor. CONCLUSIONS : This study demonstrated the capability of the combined model showing the spatio-tempral change of emission concentration.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.1
• /
• pp.11-19
• /
• 2016

Recently, global companies are developing the automobile technologies, converged with state-of-the-art IT technologies for the commercialization of autonomous vehicles. These autonomous vehicles are required the accurate lane information to enhance its reliability by controlling the vehicles safely. Hence, the study planned to examine possibilities of applying UAV photogrammetry of high-resolution images, obtained from the low altitudes. The high-resolution DSM and the ortho-images were generated from the GSD 7cm-level digital images that were obtained and based on the generated data, when the positions information of the roads including the lanes were extracted. In fact, the RMSE of verifying the extracted data was shown to be about 15cm. Through the results from the study, it could be concluded that the low alititude UAV photogrammetry can be applied for generating and updating a high-accuracy map of road areas.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.1
• /
• pp.49-55
• /
• 2008

The face extraction is very important to provide the images of the roads and road sides without the problem of privacy. For face extraction form roadside images, we detected the skin color area by using HSI and YCrCb color models. Efficient skin color detection was achieved by using these two models. We used a connectivity and intensity difference for grouping, skin color regions further we applied shape conditions (rate, area, number and oval condition) and determined face candidate regions. We applied thresholds to region, and determined the region as the face if black part was over 5% of the whole regions. As the result of the experiment 28 faces has been extracted among 38 faces had problem of privacy. The reasons which the face was not extracted were the effect of shadow of the face, and the background objects. Also objects with the color similar to the face were falsely extracted. For improvement, we need to adjust the threshold.