• 제목/요약/키워드: road tunnels

검색결과 259건 처리시간 0.026초

2-Arch 도로터널에 적용된 표준지보패턴의 적정성 검토 (A Evaluation of Standard Support Pattern for Two-Arch Road Tunnel)

  • 천병식;최광보;김혜양;유준희
    • 한국지반환경공학회 논문집
    • /
    • 제9권7호
    • /
    • pp.25-35
    • /
    • 2008
  • 국내의 경우 일반적인 2차로 도로터널은 시공경험 및 축적된 제반자료가 풍부하여 표준적인 지보패턴이 제시되고 있으나, 2-Arch 도로터널의 경우 아직 시공경험 및 계측자료가 부족하여 특정지형 및 암질에 대해 별도의 발파설계와 해석을 통해 선정한 지보패턴을 표준적으로 적용하고 있다. 따라서 본 연구에서는 2-Arch 도로터널의 설계 및 시공시 적용되고 있는 표준지보패턴에 대하여 하중분담률 및 편토압에 따른 거동을 분석하고 발파진동이 중앙벽체에 미치는 영향을 분석하여 적용된 지보재의 적정성 여부를 검토하였다. 그 결과 표준지보패턴에 적용되는 지보량은 적정한 것으로 나타났으나, 이는 특정지형 및 암질 조건을 고려하여 해석 후 선정된 것으로, 향후 2-Arch 도로터널의 설계 및 시공시 최종적인 표준지보패턴 선정은 대상 터널의 지형조건, 토질조건, 시공조건 등을 종합적으로 고려하여 결정되어야 할 것으로 사료된다.

  • PDF

횡류식 선택대배기환기에서의 배연특성에 관한 연구 (A study on the effective fire and smoke control in transverse oversized exhaust ventilation)

  • 한상필;전용한
    • 한국터널지하공간학회 논문집
    • /
    • 제13권6호
    • /
    • pp.451-462
    • /
    • 2011
  • 도로터널의 환기 시스템은 차량 화재시 안전한 대피환경을 조성하는데 중요한 역할을 하며 종류환기방식과 횡류환기방식으로 대별된다. 본 연구에서는 횡류환기방식에서 대배기구방식에 대한 터널내 풍속, 배연풍량, 개방되는 배기구의 위치에 따른 유동가시화에 대하여 선행 연구와 FDS 시뮬레이션에 의한 결과를 비교하여 연기의 이동특성을 고찰하였다. 그 결과, 연기발생량(Vc=0)에 따른 배연풍량을 제어하여 연기를 피난허용범위 250 m 이내로 제한할 수 있었으며, 터널풍속이 1.75 m/s 와 2.5 m/s일 때 배연풍량은 각각 $173m^3/s$, $236m^3/s$ 을 초과하여야만 연기이동 거리를 250 m로 제한할 수 있었으며 화재지점 가까이에 있는 2개의 배기구를 동시에 개방하는 경우가 배연의 효과가 현저하게 높게 나타났다.

The tunnel model tests of material development in different surrounding rock grades and the force laws in whole excavation-support processes

  • Jian Zhou;Zhi Ding;Jinkun Huang;Xinan Yang;Mingjie Ma
    • Geomechanics and Engineering
    • /
    • 제36권1호
    • /
    • pp.51-69
    • /
    • 2024
  • Currently, composite lining mountain tunnels in China are generally classified based on the [BQ] method for the surrounding rock grade. Increasingly, tunnel field construction is replicated indoors for scale down model tests. However, the development of analogous materials for model tests of composite lining tunnels with different surrounding rock grades is still unclear. In this study, typical Class III and V surrounding rock analogous materials and corresponding composite lining support materials were developed. The whole processes of excavation-support dynamics of the mountain tunnels were simulated. Data on the variation of deformations, contact pressures and strains on the surrounding rock were obtained. Finally, a comparative analysis between model tests and numerical simulations was performed to verify the rationality of analogous material development. The following useful conclusions were obtained by analyzing the data from the tests. The main analogous materials of Class III surrounding rock are barite powder, high-strength gypsum and quartz sand with fly ash, quartz sand, anhydrous ethanol and rosin for Class V surrounding rock. Analogous materials for rockbolts, steel arches are replaced by aluminum bar and iron bar respectively with both shotcrete and secondary lining corresponding to gypsum and water. In addition, load release rate of Class V surrounding rock should be less than Class III surrounding rock. The fenestration level had large influence on the load sharing ratio of the secondary lining, with a difference of more than 30%, while the influence of the support time was smaller. The Sharing ratios of secondary lining in Class III surrounding rock do not exceed 12%, while those of Class V surrounding rock exceed 40%. The overall difference between the results of model tests and numerical simulations is small, which verifies the feasibility of similar material development in this study.

터널 입구부 안전시설물 안전성 증대방안 연구 (A Study on Safety Improvement of Safety Devices at Entrance of Expressway Tunnels)

  • 이점호;김장욱;김덕수;이수범
    • 한국도로학회논문집
    • /
    • 제10권4호
    • /
    • pp.235-245
    • /
    • 2008
  • 본 연구에서는 도로의 증가와 더불어 급속히 증가하고 있는 터널에서 차량이 터널에 진입할 때의 속도편차를 분석하여 터널입구부의 안전성을 증진할 수 있는 방안에 대하여 연구하였다. 터널의 존재는 운전자에게 그 자체만으로서 단순한 오르막 경사보다 더 큰 속도 감소를 유발하며, 터널 입구부에서 발생하는 차량 충돌사고는 다른 도로구간에서 발생하는 사고와 비교해 볼 때 피해가 더 크다. 따라서 사고로 인한 피해를 경감시키기 위해 터널 입구부에 PE방호벽이나 가드레일 등의 안전시설을 설치하고 있지만, 운전자에게 이것은 또 다른 장애물로 인식될 수 있다. 터널 입구부에 설치되어 있는 안전시설물의 형태는 크게 PE방호벽, 가드레일, PE 드럼 등이 있으나, 본 연구에서는 고속도로터널 입구에 일반적으로 가장 많이 설치되어 있는PE방호벽과 운전자에게 장애물로 인식될 수 있는 이러한 안전시설물이 설치되어 있지 않은 경우로 크게 구분하였다. 또한 터널 내부로 진입 할 때 갓길을 포함 우측방여유폭의 차이가 큰 경우와 작은 경우로 구분하였다. 4가지 형태의 터널 입구부에서의 차량속도와 일반도로구간에서의 YDS(차량검지체계)로 수집된 속도의 차이를 분석에 사용하였다. 통계적 검증을 통하여 안전시설물 설치 형태와 우측방여유폭의 차이에 따른 각 Case별 유의성을 검토하여 터널 입구부 안전성 증진을 위한 대안을 제시하고자 한다.

  • PDF

로짓모형을 이용한 고속도로 장대터널 교통사고 특성분석에 관한 연구 (A Study on the Traffic Accident Characteristics Analysis in Expressway Longitudinal Tunnel using a Logit Model)

  • 서임기;박제진;안병호;이준영
    • 대한토목학회논문집
    • /
    • 제32권6D호
    • /
    • pp.549-556
    • /
    • 2012
  • 장대터널은 터널연장이 1km 이상인 터널로 정의한다. 우리나라의 지형적 조건과 안전한 선형설계를 위한 방편으로 터널구간이 불가피하게 많이 건설되고 있는 실정이다. 고속도로에 건설된 장대터널은 2010년 말 104개소, 총 연장 192km로 터널의 수요증가와 더불어 터널구간 또한 장대화 되고 있어 장대터널에 대한 안전성 평가가 이루어져야 할 것으로 판단된다. 이에 본 연구에서는 장대터널을 구성하고 있는 설계요소, 교통환경, 시선유도시설 등의 요인을 선정하여 교통사고 영향요인을 도출하고자 한다. 이를 위해 교통사고가 발생한 터널과 발생하지 않은 터널로 구분하여 통계적으로 유의한 설명변수를 선정하였다. 통계적으로 유의한 설명변수를 이용하여 교통사고에 더 직접적으로 영향을 미치는 요인을 파악하기 위해 로짓모형을 구축하였다. 분석결과, 운전자의 시인성 관련 요인인 주행차로 및 추월차로의 공동구 내장재 시설과 터널의 공간 확보를 위한 측방여유폭, 차로당 연평균일교통량 요인이 교통사고와 관련이 있는 것으로 분석되었다. 이러한 연구결과는 향후 장대터널 내 교통사고 예방대책을 수립하는 분석지표로 활용이 가능할 것으로 판단된다.

The difference in the slope supported system when excavating twin tunnels: Model test and numerical simulation

  • Liu, Xinrong;Suliman, Lojain;Zhou, Xiaohan;Zhang, Jilu;Xu, Bin;Xiong, Fei;Elmageed, Ahmed Abd
    • Geomechanics and Engineering
    • /
    • 제31권1호
    • /
    • pp.15-30
    • /
    • 2022
  • Slope stability during the excavation of twin road tunnels is considered crucial in terms of safety. In this research, physical model testing and numerical analysis were used to investigate the characteristics of the settlement (uz) and vertical stresses (σz) along the two tunnel sections. First, two model tests for a (fill-rock) slope were conducted to study the settlement and stresses in presence and absence of slope support (plate support system). The law and value of the result were then validated by using a numerical model (FEM) based on the physical model. In addition, a finite element model with a slope supported by piles (equivalent to the plate) was used for comparison purposes. In the physical model, several rows of plates have been added to demonstrate the capacity of these plates to sustain the slope by comparing excavating twin tunnels in supported and unsupported slope, the results show that this support was effective in the upper part of the slope, while in the middle and lower part the support was limited. Additionally, the plates appear to induce less settlement in several areas of the slope with differing settlement and stress distribution as compared to piles. Furthermore, as a results of the previous mentioned investigation, there are many factors influence the stress and settlement distribution, such as the slope's cover depth, movement during excavation, buried structures such as the tunnel lining, plates or piles, and the interaction between all of these components.

A Study on the Variation of Ground Safety Factor by Earthworks

  • Kim, Jinhwan;Kwon, O-Il;Baek, Yong;Kim, Chang-Yong
    • 지질공학
    • /
    • 제24권3호
    • /
    • pp.333-341
    • /
    • 2014
  • The construction of roads, tunnels, and bridges results in changes to the local terrain that may influence the ground safety factor, which represents the stability of geotechnical structures. In this study, we assessed construction sites that had collapsed as a result of terrain change, and then simulated variation in the ground safety factor with respect to terrain change caused by road construction. We assumed steep slopes to simulate changes in terrain in a mountainous area and assumed that earthworks took place for road construction by cutting a platform into the slope and altering the slope angle of the terrain both above and below the road. We calculated values of the ground safety factor through a stability analysis of the slope both above and below the road, and examined the variation in the safety factor of the above- and below-road slopes with respect to changes in road width. We found that if the slope angle was the same above and below the road, then the change in the ground safety factor during/after road construction occurred in the slope below the road, and if the slope angle above the road differed from that below, then the change occurred in both the above- and below-road slopes. Furthermore, the ground safety factor was essentially constant for road widths exceeding 2-6 m, depending on both above- and below-road slope angle. The findings of this study can be used to guide the management of construction sites and to assess changes in ground stability during road construction work, particularly in the early stages of earthworks, when the road width is narrow.

남산 1·2·3호 터널사고에 대한 재난대응방안 (Namsan 1.2.3 Tunnel accident disaster countermeasures)

  • 이정일
    • 대한안전경영과학회지
    • /
    • 제15권1호
    • /
    • pp.69-75
    • /
    • 2013
  • Namsan road are taxis in the engine room fires (07/14/2011 18:05) in the tunnel, and the driver of the vehicle was 100 passenger car and more than 500 evacuated were disasters. Pole road vehicles within the tunnel if there is a fire tunnel fire occurred at a two-way evacuation difficult and rapid evacuation is difficult and mass casualties are concerned, the number of casualties is feared. In this study, by considering the problems and improve the Namsan 1,2,3 Tunnel In case of fire, the best disaster response is to come up with ways.

도로 터널내의 공기유동 양상을 예측하기 위한 수치해석 (Numerical Analysis to Predict Air Flow Phenomena in a Road Tunnel)

  • 최인수;박병덕;윤일로
    • 한국산업융합학회 논문집
    • /
    • 제5권4호
    • /
    • pp.313-320
    • /
    • 2002
  • A 2-dimensional $k-{\varepsilon}$ numerical model was developed to explore the effects of vehicle movement, jet fan and wind speed for the ventilation of road tunnels. To consider the temperature distribution in the tunnel, the energy equation was solved with a source term of the energy exhausted from vehicles. Although the tunnel ventilation can be made by the piston effect of vehicle movement, an additional ventilation is necessary when a head wind is existing. Jet fans may assist the air flow in the tunnel. However, more efficient ventilation system should be necessary, because the exhaust gas from vehicles flow along the road surface and it cannot be diffused in the longitudinal tunnel.

  • PDF

인공신경망을 이용한 한국형 터널 암반분류 (Rock Mass Rating for Korean Tunnels Using Artificial Neural Network)

  • 양형식;김재철
    • 터널과지하공간
    • /
    • 제9권3호
    • /
    • pp.214-220
    • /
    • 1999
  • 본 연구에서는 RMR system항목들의 타당성을 평가하였고 국내현장에서 측정한 데이터에 대한 적용성을 검토하였다. 데이터베이스는 전국에 걸쳐 지하철, 철도, 도로 터널로 구분하여 139개 현장으로부터 작성하였다. Bieniawsk의 원분류는 경험적으로 도출되었지만 비교적 타당한 것으로 분석되었다. 그러나 국내 현장에 적용할 때에는 상당한 차이가 있어서 국내의 데이터베이스로 추론한 새로운 암반분류 시스템 KRMR1과 KRMR2를 제안하였다. KRMR1에서는 인자들의 등 급비중을 조정하였으며 KRMR2에는 2개의 인자를 추가하였다. 이 과정에서 암반의 성질을 평가하는 ‘특성치’의 선택이 어려워 인공신경 망을 이용하여 추론하였다.

  • PDF