• Journal of Korean Society of Transportation
• /
• v.28 no.2
• /
• pp.21-32
• /
• 2010

A traffic island, typical channelization facilities, is widely applied to newly road designs and black spots improvement projects as traffic safety measures. However positive effects of a traffic island for traffic safety have not been reported specifically. Accordingly this study analyzed the accidents reduction effectiveness and economics of installing traffic islands under various roadways and traffic conditions. For this purpose normality test, paired t-test and Wilcoxon signed rank test were applied to this study based on traffic accidents, roadways and traffic environments data for 3 years before and after improvement at 54 intersections. The results showed that most of traffic accidents were reduced significantly after installing traffic islands except when traffic islands were installed in outside of cities and farming regions where use efficiency is low, curve sections with poor visibility, poor alignment sections with acceleration/deceleration lanes, road sections where occurs conflicts frequently due to did not install of acceleration/deceleration lanes, and road sections where cross with single lane road.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.4
• /
• pp.1-13
• /
• 2009

VMS(Variable Message Sign) which makes the traffic flow smooth by providing traffic information to road users in real-time has been being installed or operated on the road as part of the detailed ITS system. However, some problems were found as a result of survey on express way currently. In the part of the phase operation, the message interpretation time wasn't defined so that the phase operation was difficult. In the part of the information service, not considering characteristic of the VMS section caused the confusion to drivers. In the part of the message exposure, font, alignment, conversion and composition of the information were not consistent and use of superfluous words and inconsistent use of word having the same meaning brought about the problem on information communication This study established the detailed exposure method based on instructions relative to VMS operation. The method established by defining the number of appropriate phase and setting required function of each individual VMS installation location. The method is as follow. the font type is the GULIM, the message conversion method is simple conversion method, the alignment method is centering alignment method and the color is defined according to each situation. In this study, the preference survey was performed to review the validity of the proposed improvement through the common driver. The results were similar with the pre-study except for the font type. This study established the detailed exposure method based on instructions relative to VMS operation. The method established by defining the number of appropriate phase and setting required function of individual VMS installation location. For the evaluation of status and improvement, preference survey of ordinary drivers and statistics analysis was carried.

• International Journal of Highway Engineering
• /
• v.10 no.1
• /
• pp.1-9
• /
• 2008

Five bases for of highways are sight distance, vehicle stability, driver comfort, drainage and aesthetics. Among these bases, the sight distance is the most critical one in the highway alignment design. It is certain that highways and drivers' observation actions are 3-dimensional in nature. But, the highway alignment design and the sight distance analysis have been performed on 2-dimensional planes because of various constraints and complexity of calculating 3-dimensional sight distance. The purpose of this study is to derive a model for determining exact available sight distance in 3-D combined horizontal and vertical alignments. Application of the model is illustrated using numerical examples. The proposed model should be useful in quantifying the criteria for 3-D highway alignments.

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.187-197
• /
• 2008

While driving a highway, A driver gets lots of information through geometrical structure, traffic situation, signs on the road. He gets most of the information by visual sense. Acceleration or deceleration and driving direction depend on sight distance. Therefore, it's essential to secure a driver's sight distance for a safe drive. However, design guides of geometrical structure and sight distance suggest respective standards of horizontal and vertical alignment. They do not indicate quantitative standard of combined alignment. Currently, element separated on a two-dimensional projected plane are available, but they do not guarantee safe and pleasant design. I will use the existent model analysing three-dimensional sight distance through mathematical calculation and sort a variety of geometrical structure element and type. In these researches, we will look at how much three-dimensional sight distance is overestimated or underestimated compared to two-dimensional. I will develop a program which predicts traffic velocity on the curvature of two-lane provincial road. stopped sight distance and three-dimensional sight distance will be compared at a predicted drive velocity. I will suggest the way to evaluate road consistency.

• The Journal of Engineering Geology
• /
• v.17 no.1 s.50
• /
• pp.115-123
• /
• 2007

Recently, accelerating population and advanced economy result in extending old freeways and constructing new freeways. To make a good freeway shape, tunnel constructions are also rapidly increasing. Therefore, a possibility of a collapse during a tunnel excavation is getting higher in a proportionate manner. Especially, tunnel excavation has increased in poor geological condition in order to maintain good alignment of road and the collapse of tunnel has often happened without reinforcement method. This research paper will analyze for ms and causes of the collapses for different geological conditions and applied reinforcement solutions by investigating typical collapse sites during highway tunnel constructions.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.3
• /
• pp.293-301
• /
• 2005

In case of the roads that pass the mountain area, the cut sections or the tunnels are constructed. And In winter season it appears sunshine few in the specific segment, the shade is continued last and the freezing sections occur. So, the attention is necessary in traffic safety. This study was to evaluate the influence of sunshine and surface freezing sections expected in route plans of roads using GIS and makes alternative ideas in road stability security. After selecting 29 km sections of Donghae highway and creating a 3 dimensional terrain surface through the digital conversion of design plan data, it reflects the road alignment data of the same coordinates and a 3 dimensional road modeling is created. It set shadow time of road surface for the solar trace in the winter solstice in 20 minute interval. Shade areas are displayed and inputed in polygon data by manual vertorizing. Graphic and attribute data of this shade section is constructed in geodatabase of ArcCatalog. And it extracted the freezing section using intersect fuction of the GIS spatial analysis. By analyzing the winter meteorological data of temperature, rainfall, snowfall, humidity, and etc. and grasping dangerous freezing section of the road surface effectively, it will be able to make alternative ideas of the preliminary stability evaluation reflected in basic design.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.2049-2056
• /
• 2013

With the advance in information communication, the information age has come, and desire of human being in increasing. In this circumstance, the necessity for design for building of superhighways is arising to improve the mobility in the field of transportation, too. This study was conducted to analyze if driver can drive at a design speed on a superhighway with a design speed exceeding 120km/h. For this study, it was experimented if the running speed that makes a driver feel anxious, increased, when road alignment and standard improved, due to the differences of design speed. For the experiment, 30 subjects were asked to attach brain wave analyzers to bodies. Then, this study compared powers of ${\beta}$ waves generated, when they felt anxious, driving on the roads with different design speeds, and driving virtually through a simulator. Here, Kangbyeonbukro (90km/h), Jayuro(100km/h), Joongang Expressway(110km/h), and Seohaean Expressway(120km/h) were selected as experimental sections. While drivers drove on the Kangbyeonbukro and Jayuro at a speed of 80km/h - 130km/h, on the Joongang Expressway at a speed of 100km/h - 150km/h, and Seohaean Expressway at a speed of 110km/h - 180km/h, powers of anxiety EEGs(electroencephalogram) were compared, and during the simulation driving at the same speed of 110km/h - 180km/h, powers of anxiety EEGs were compared and analyzed. Moreover, the speed when anxiety EEGs increased, was statistically verified through paired t-test. As the result, the speed when anxiety EEGs increased during the simulation driving was nearly 30km/h higher than when they increased during the actual driving on the expressways, and anxiety EEGs increased at the same speed, when subjects drove on the roads with a design speed of 90km/h and 100km/h. It means that there were small differences in road alignment and standard. However, the running speed to make drivers feel anxious was increased at both roads with a design speed of 110km/h and 120km/h. It implies that drivers can drive at a higher speed, as road alignment and standard improve.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.2
• /
• pp.55-67
• /
• 2005

This study presented the route location method by applying AHP and evaluating quantitatively. This study developed the program that can be easily applied to this kind of road design, and built the decision support system for route location. The study results are summarized as follows ; We could quantitatively evaluate the appropriateness of exiting routes by applying the AHP based on GIS. If we apply this to the roads that will be newly constructed, we can make the objective and reliable route location when making road plans and basic designs. We improved the technique of route location by applying the decision support system with third-dimensional data, which considers even the vertical alignment plan, to the existing decision support system with second-dimensional data. And, since we can set those data such as vertical slope, earth-volume, structure size, location and construction cost to independent variables, we can make road designs more scientifically and reasonably.

• International Journal of Highway Engineering
• /
• v.19 no.5
• /
• pp.163-171
• /
• 2017

PURPOSES : Traffic safety facilities are used to prevent traffic accidents before they occur by providing drivers with information on traffic situations and the geometric design of roads. However, some facilities not defined in guidelines do not meet installation criteria, yet are being installed and used in order to increase efficiency in traffic flow and prevent traffic accidents in a specific expressway zone. In this study, we have evaluated the effect of delineation system which are not defined in the guideline criteria. METHODS : Different virtual scenarios were created for roads using expressway median barrier chevron signs, with a driving simulator used to evaluate the installation and operational effect of such signs. Ten experiments were performed with left- and right-curved roads at curve radius intervals of 500 m, from 500 m to 2,500 m. RESULTS : For sections with a curve radius of more than 1,500 m, drivers had a clear tendency toward stable driving regardless of delineation system. When a chevron sign is installed on a protection fence in the road curving left, an expanded installation is recommended up to the section with a curve radius of 1,000 m. According to the analysis results for the RHB (Relative High Beta spectrum), driving concentration also improved up to a curve radius of 1,000 m. CONCLUSIONS :The experiment result indicates the extent of biasing within a lane and the manipulation amount of steering handle, were analyzed and found to be affected by curve radius and road alignment regardless of delineation system.

• Journal of Korean Society of Transportation
• /
• v.22 no.7 s.78
• /
• pp.139-146
• /
• 2004

Road design should be conformed to the expectancy of drivers. The alignment such as long tangent followed by the sharp horizontal curve should be avoided for the road design consistency. Currently, operating speed profile model is generally used to check the consistency of the successive road alignments. In this model, the hypothesis about the drivers' behaviour on the long tangent followed by the sharp horizontal curve is also included. This study compares the hypothesized drivers' behaviour in the existing operating speed profile model with the actual drivers' behaviour observed at the two lane rural roads. In addition to this, comparison between the acceleration for the vehicles approaching and departing horizontal curves suggested by the foreign research and the value observed at this study was made, From this study, it was concluded that the hypothesis in the existing model was well representing the actual drivers' behaviour. The deceleration for vehicles approaching the horizontal curves was ranged $0.39{\sim}1.06m/s^2$ with the average of $0.66m/s^2$. The average acceleration for the vehicles departing horizontal curves was $0.22m/s^2$.